Download or read book Spark Plasma Sintering of Materials written by Pasquale Cavaliere and published by Springer. This book was released on 2019-02-18 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes spark plasma sintering (SPS) in depth. It addresses fundamentals and material-specific considerations, techniques, and applications across a broad spectrum of materials. The book highlights methods used to consolidate metallic or ceramic particles in very short times. It highlights the production of complex alloys and metal matrix composites with enhanced mechanical and wear properties. Emphasis is placed on the speed of the sintering processes, uniformity in product microstructure and properties, reduced grain growth, the compaction and sintering of materials in one processing step, various materials processing, and high energy efficiency. Current and potential applications in space science and aeronautics, automation, mechanical engineering, and biomedicine are addressed throughout the book.
Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.
Download or read book Advanced Materials Source Book written by Jon Binner and published by Elsevier. This book was released on 2013-10-22 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials Source Book 1994-1995 presents the developments in the field of advanced materials. This book provides information regarding materials and products, legislation, patents, advances in processing and equipment, standards, and testing procedures. Organized into four chapters, this book begins with an overview of the international market trends, specific materials, or materials groups and appliances. This text then examines the applications and makes market projections on a wide range of specialty materials, including ceramics, biomaterials, electronic materials, and optical materials. Other chapters consider the healthy nature of predictions concerning Japan and parts of Europe, stating that Germany and Japan will lead the advanced structural ceramics market. This book discusses as well the developments concerning various materials. The final chapter presents a list of contact details for the organizations listed in the main text to allow the readers to make new contacts or to follow-up items of particular interest. This book is a valuable resource for private consumers.
Download or read book Novel Synthesis and Processing of Ceramics written by Frank R. Sale and published by CRC Press. This book was released on 1994 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Conference held in 1994 as part of the Annual Convention of the Institute's Ceramic Industry Division. Contents include novel production processes using electrochemical routes and aqueous and alkoxide precursors; sol-gel technology; manufacture of sialon membrane filters; and the production of nano-sized materials from aerogels.
Download or read book Glasses and Glass Ceramics for Medical Applications written by Emad El-Meliegy and published by Springer Science & Business Media. This book was released on 2011-12-02 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glass ceramics are a special group of materials in which a base glass can be crystallized under carefully controlled conditions, which in turn determine the properties of the material. These materials offer a wide range of physical and mechanical properties combining the distinctive characteristics of sintered ceramics and glasses. This book provides readers with an interest in medical ceramics with the ability to start making their own glasses and glass ceramics, together with an understanding of the various factors that control the final properties of these medical and dental materials. In addition, the authors describe various industrial problems with current, clinically-used medical glass ceramics and discuss appropriate scientific solutions. Glasses and Glass Ceramics for Medical Applications will appeal to a broad audience of biomaterials scientists, ceramists, and bioengineers, particularly those with an interest in orthopedic and dental applications, as well as scientists and engineers involved in the manufacture of glasses, glazes, enamels, and other glass coatings for the medical materials industry. The book will also be of interest to undergraduate and graduate students in materials engineering and dentistry, and is suitable for use in courses on medical and dental materials.
Download or read book Spark Plasma Sintering written by Giacomo Cao and published by Elsevier. This book was released on 2019-06-12 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spark Plasma Sintering: Current Status, New Developments and Challenges looks at the progress made in the field of SPS. It includes a review of the scientific mechanisms, materials synthesis and industry applications for this processing technique. Chapters are written by leading experts in the field, encompassing topics surrounding the densification mechanism and microstructure evolution, the classification of high-performance materials, a review of numerical simulation, discussions of new technology advances, such as HP-SPS, flash sintering and related challenges. This book will be useful for researchers, engineers and students within the materials science and engineering fields.
Download or read book Boron and Refractory Borides written by G.V. Samsonov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: V. I. MATKOVICH During the meeting of the International Symposium on Boron held in October, 1972 in Tbilisi, U.S.S.R., the idea was proposed to assemble a review of boron and refractory borides by the specialists present. The advantages of such a work were immediately apparent. Such diverse applications of borides as in protective armor, nuclear reactors, coat ings, reinforcement, etc. can hardly all be presented in sufficient detail by a single author. On the other hand it was also recognized that with so much specialization, some areas of interest may not be covered. Within the last decade or two a number of areas have been developed in which the use of refractory borides is growing and improvements are being actively explored. Thus, a number of borides have considerable potential as reinforcing material for plastics or light metals, though only boron fibers have been firmly established up to the present. Ap plication of flakes and films for two-dimensional reinforcement appears attractive, although the high cost of materials and development repre sents a considerable barrier. A number of borides have been used to manufacture lightweight protec tive armor. In this area relatively fast changes seem to be taking place as improvements in performance and weight are made. Boron carbide has found considerable use in this application and new developments exploit the light weight of beryllium borides.
Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Download or read book Field Assisted Sintering written by Eugene A. Olevsky and published by Springer. This book was released on 2018-08-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.
Download or read book Fundamentals of Ceramic Powder Processing and Synthesis written by Terry A. Ring and published by Elsevier. This book was released on 1996-04-30 with total page 985 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic powder synthesis and processing are two of the most important technologies in chemical engineering and the ceramics-related area of materials science. This book covers both the processing and the synthesis ofceramic powders in great depth and is indeed the only up-to-date, comprehensive source on the subject available.The application of modern scientific and engineering methods to the field of ceramic powder synthesis has resulted in much greater control of properties. Fundamentals of Ceramic Powder Processing and Synthesis presents examples of these modern methods as they apply to ceramic powders. The book is organized to describe the natural and synthetic raw materials that comprise contemporary ceramics. It covers the three reactant processes used in synthetic ceramic powder synthesis: solid, liquid, andgas.Ceramic powder processing, as a field of materials processing, is undergoing rapid expansion. The present volume is intended as a complete and useful source on this subject of great current interest. It provides comprehensive coverage from a strong chemistry and chemical engineering perspective and is especially applicable to materials scientists, chemical engineers, and applied chemists.Key Features* The most complete and updated reference source on the subject* Comprehensive coverage from a stron chemical engineering and chemistry perspective* Emphasis on both natural and synthetic raw materials in ceramic powder synthesis* Information on reaction kinetics* Superior, more comprehensive coverage than that in existing texts* Sample problems and exercises* Problems at the end of each chapter which supplement the material
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Electrophoretic Deposition of Nanomaterials written by James H. Dickerson and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary basic research, emerging technology, and commercial and industrial applications associated with the electrophoretic deposition of nanomaterials. This presentation of the subject includes an historical survey, the underlying theory of electrophoresis, dielectrophoresis, and the colloidal deposition of materials. This is followed by an assessment of the experimental equipment and procedures for electrophoretic and dielectrophoretic aggregation, manipulation, and deposition of nanoparticles, nanotubes, and other nanomaterials. Additional chapters explore the specific science and technology of electrophoretic film formation, using widely studied and application-driven nanomaterials, such as carbon nanotubes, luminescent nanocrystals, and nano-ceramics. The concluding chapters explore industrial applications and procedures associated with electrophoretic deposition of nanomaterials.
Download or read book Verified Synthesis of Zeolitic Materials written by H. Robson and published by Gulf Professional Publishing. This book was released on 2001-06-26 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeolite synthesis is an active field of research. As long as this continues, new phases will be discovered and new techniques for preparing existing phases will appear. This edition of Verified Synthesis of Zeolitic Materials contains all the recipes from the first edition plus 24 new recipes. Five new introductory articles have been included plus those from the first edition, some of which have been substantially revised. The XRD patterns have been recorded using different instrument settings from those in the first edition and are intended to conform to typical X-ray diffraction practice. In most cases, only the XRD pattern for the productas synthesised is printed here. The exceptions are those phases which show marked changes in the XRD pattern upon calcination.
Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.
Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.
Download or read book Inorganic Materials Synthesis and Fabrication written by John N. Lalena and published by John Wiley & Sons. This book was released on 2008-01-09 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date, single-source reference on the preparation of single-phase inorganic materials covers the most important methods and techniques in solid-state synthesis and materials fabrication. Presenting both fundamental background and advanced methodologies, it describes the principles of crystallography, thermodynamics, and kinetics required, addresses crystallographic and microstructural considerations, and describes various kinds of reactions. This is an excellent text for materials science and engineering, chemistry, and physics students, as well as a practical, hands-on reference for working professionals.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2007 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
