Download or read book Nonthermal Plasmas for Materials Processing written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2022-07-15 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: NONTHERMAL PLASMAS FOR MATERIALS PROCESSING This unique book covers the physical and chemical aspects of plasma chemistry with polymers and gives new insights into the interaction of physics and chemistry of nonthermal plasmas and their applications in materials science for physicists and chemists. The properties and characteristics of plasmas, elementary (collision) processes in the gas phase, plasma surface interactions, gas discharge plasmas and technical plasma sources, atmospheric plasmas, plasma diagnostics, polymers and plasmas, plasma polymerization, post-plasma processes, plasma, and wet-chemical processing, plasma-induced generation of functional groups, and the chemical reactions on these groups along with a few exemplary applications are discussed in this comprehensive but condensed state-of-the-art book on plasma chemistry and its dependence on plasma physics. While plasma physics, plasma chemistry, and polymer science are often handled separately, the aim of the authors is to harmoniously join the physics and chemistry of low-pressure and atmospheric-pressure plasmas with polymer surface chemistry and polymerization and to compare such chemistry with classic chemistry. Readers will find in these chapters Interaction of plasma physics and chemistry in plasmas and at the surface of polymers; Explanation and interpretation of physical and chemical mechanisms on plasma polymerization and polymer surface modification; Introduction of modern techniques in plasma diagnostics, surface analysis of solids, and special behavior of polymers on exposure to plasmas; Discussion of the conflict of energy-rich plasma species with permanent energy supply and the much lower binding energies in polymers and alternatives to avoid random polymer decomposition Technical applications such as adhesion, cleaning, wettability, textile modification, coatings, films, etc. New perspectives are explained about how to use selective and mild processes to allow post-plasma chemistry on non-degraded polymer surfaces. Audience Physicists, polymer chemists, materials scientists, industrial engineers in biomedicine, coatings, printing, etc.
Download or read book Non Thermal Plasma Technology for Polymeric Materials written by Sabu Thomas and published by Elsevier. This book was released on 2018-10-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Thermal Plasma Technology for Polymeric Materials: Applications in Composites, Nanostructured Materials and Biomedical Fields provides both an introduction and practical guide to plasma synthesis, modification and processing of polymers, their composites, nancomposites, blends, IPNs and gels. It examines the current state-of-the-art and new challenges in the field, including the use of plasma treatment to enhance adhesion, characterization techniques, and the environmental aspects of the process. Particular attention is paid to the effects on the final properties of composites and the characterization of fiber/polymer surface interactions. This book helps demystify the process of plasma polymerization, providing a thorough grounding in the fundamentals of plasma technology as they relate to polymers. It is ideal for materials scientists, polymer chemists, and engineers, acting as a guide to further research into new applications of this technology in the real world. - Enables materials scientists and engineers to deploy plasma technology for surface treatment, characterization and analysis of polymeric materials - Reviews the state-of-the-art in plasma technology for polymer synthesis and processing - Presents detailed coverage of the most advanced applications for plasma polymerization, particularly in medicine and biomedical engineering, areas such as implants, biosensors and tissue engineering
Download or read book Cold Plasma Cancer Therapy written by Michael Keidar and published by Morgan & Claypool Publishers. This book was released on 2019-04-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold atmospheric plasma (CAP) emerges as a possible new modality for cancer treatment. This book provides a comprehensive introduction into fundamentals of the CAP and plasma devices used in plasma medicine. An analysis of the mechanisms of plasma interaction with cancer and normal cells including description of possible mechanisms of plasma selectivity is included. Recent advances in the field, the primary challenges and future directions are presented.
Download or read book Nonthermal Plasma Chemistry and Physics written by Jurgen Meichsner and published by CRC Press. This book was released on 2012-11-13 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to introducing the basics of plasma physics, Nonthermal Plasma Chemistry and Physics is a comprehensive presentation of recent developments in the rapidly growing field of nonthermal plasma chemistry. The book offers a detailed discussion of the fundamentals of plasma chemical reactions and modeling, nonthermal plasma sources, relevant
Download or read book Plasma Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of materials is a critical technology to several of the largest manufacturing industries in the worldâ€"electronics, aerospace, automotive, steel, biomedical, and toxic waste management. This book describes the relationship between plasma processes and the many industrial applications, examines in detail plasma processing in the electronics industry, highlights the scientific foundation underlying this technology, and discusses education issues in this multidisciplinary field. The committee recommends a coordinated, focused, and well-funded research program in this area that involves the university, federal laboratory, and industrial sectors of the community. It also points out that because plasma processing is an integral part of the infrastructure of so many American industries, it is important for both the economy and the national security that America maintain a strong leadership role in this technology.
Download or read book Industrial Plasma Engineering written by J Reece Roth and published by Routledge. This book was released on 2017-11-01 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert in the field, the paperback edition of Industrial Plasma Engineering, Volume 2: Applications to Nonthermal Plasma Processing provides a background in the principles and applications of low temperature, partially ionized Lorentzian plasmas that are used industrially. The book also presents a description of plasma-related processes and devices that are of commercial interest. The text is suitable for students or in-service users with a physics and calculus background at the sophomore level. These two volumes are intended to be used as textbooks at the senior or first-year graduate level by students from all engineering and physical science disciplines and as a reference source by in-service engineers.
Download or read book Applications of Plasma Technologies to Material Processing written by Giorgio Speranza and published by CRC Press. This book was released on 2019-04-10 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a survey of the latest research and developments in plasma technology. In an easy and comprehensive manner, it explores what plasma is and the technologies utilized to produce plasma. It then investigates the main applications and their benefits. Different from other books on the topic that focus on specific aspects of plasma technology, the intention is to provide an introduction to all aspects related to plasma technologies. This book will be an ideal resource for graduate students studying plasma technologies, in addition to researchers in physics, engineering, and materials science Features Accessible and easy to understand Provides simple yet exhaustive explanations of the foundations Explores the latest technologies and is filled with practical applications and case studies
Download or read book Cold Plasma in Food and Agriculture written by NN Misra and published by Academic Press. This book was released on 2016-07-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold Plasma in Food and Agriculture: Fundamentals and Applications is an essential reference offering a broad perspective on a new, exciting, and growing field for the food industry. Written for researchers, industry personnel, and students interested in nonthermal food technology, this reference will lay the groundwork of plasma physics, chemistry, and technology, and their biological applications. Food scientists and food engineers interested in understanding the theory and application of nonthermal plasma for food will find this book valuable because it provides a roadmap for future developments in this emerging field. This reference is also useful for biologists, chemists, and physicists who wish to understand the fundamentals of plasma physics, chemistry, and technology and their biological interactions through applying novel plasma sources to food and other sensitive biomaterials. Examines the topic of cold plasma technology for food applications Demonstrates state-of-the-art developments in plasma technology and potential solutions to improve food safety and quality Presents a solid introduction for readers on the topics of plasma physics and chemistry that are required to understand biological applications for foods Serves as a roadmap for future developments for food scientists, food engineers, and biologists, chemists, and physicists working in this emerging field
Download or read book Plasma Medical Science written by Shinya Toyokuni and published by Academic Press. This book was released on 2018-07-06 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Medical Science describes the progress that has been made in the field over the past five years, illustrating what readers must know to be successful. As non-thermal, atmospheric pressure plasma has been applied for a wide variety of medical fields, including wound healing, blood coagulation, and cancer therapy, this book is a timely resource on the topics discussed. - Provides a dedicated reference for this emerging topic - Discusses the state-of-the-art developments in plasma technology - Introduces topics of plasma biophysics and biochemistry that are required to understand the application of the technology for plasma medicine - Brings together diverse experience in this field in one reference text - Provides a roadmap for future developments in the area
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Principles of Plasma Discharges and Materials Processing written by Michael A. Lieberman and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Thorough Update of the Industry Classic on Principles of Plasma Processing The first edition of Principles of Plasma Discharges and Materials Processing, published over a decade ago, was lauded for its complete treatment of both basic plasma physics and industrial plasma processing, quickly becoming the primary reference for students and professionals. The Second Edition has been carefully updated and revised to reflect recent developments in the field and to further clarify the presentation of basic principles. Along with in-depth coverage of the fundamentals of plasma physics and chemistry, the authors apply basic theory to plasma discharges, including calculations of plasma parameters and the scaling of plasma parameters with control parameters. New and expanded topics include: * Updated cross sections * Diffusion and diffusion solutions * Generalized Bohm criteria * Expanded treatment of dc sheaths * Langmuir probes in time-varying fields * Electronegative discharges * Pulsed power discharges * Dual frequency discharges * High-density rf sheaths and ion energy distributions * Hysteresis and instabilities * Helicon discharges * Hollow cathode discharges * Ionized physical vapor deposition * Differential substrate charging With new chapters on dusty plasmas and the kinetic theory of discharges, graduate students and researchers in the field of plasma processing should find this new edition more valuable than ever.
Download or read book Nonthermal Plasma Surface Modification of Materials written by Masaaki Okubo and published by Springer Nature. This book was released on 2023-12-02 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals and applicability of the atmospheric-pressure non-thermal plasma surface modification of materials. Non-thermal plasma modification is an effective procedure for chemical activation. In this book, the principles of non-thermal plasma surface modification and its application to various machine parts are described. By reading this book, technologists from a variety of fields can learn about plasma generation and surface treatment technology, which will assist them in performing advanced procedures. This book also explains the basics of atmospheric-pressure plasma and the principle of plasma treatment in an easy-to-understand manner and also provides examples of the application of atmospheric-pressure plasma surface modification technologies to plastics, glass, polymers, and metals. After reading this book, readers can get the knowledge that researchers need to apply the methodology to meet their own research goals. The book is self-contained in the sense that it spans the divide between the fundamentals and more advanced content regarding applications. Many engineers and graduate students working in this field get many helps.
Download or read book Silicon Nanocrystals written by Lorenzo Pavesi and published by John Wiley & Sons. This book was released on 2010-02-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique collection of knowledge represents a comprehensive treatment of the fundamental and practical consequences of size reduction in silicon crystals. This clearly structured reference introduces readers to the optical, electrical and thermal properties of silicon nanocrystals that arise from their greatly reduced dimensions. It covers their synthesis and characterization from both chemical and physical viewpoints, including ion implantation, colloidal synthesis and vapor deposition methods. A major part of the text is devoted to applications in microelectronics as well as photonics and nanobiotechnology, making this of great interest to the high-tech industry.
Download or read book Emerging Developments and Applications of Low Temperature Plasma written by Shahzad, Aamir and published by IGI Global. This book was released on 2021-12-17 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low temperature plasma in medicine is a new field that rose from the research in the application of cold plasmas in bioengineering. Plasma medicine is an innovative and promising multidisciplinary novel field of research covering plasma physics, life sciences, and clinical medicine to apply physical plasma for therapeutic applications. Emerging Developments and Applications of Low Temperature Plasma explores all areas of experimental, computational, and theoretical study of low temperature and atmospheric plasmas and provides a collection of exciting new research on the fundamental aspects of low temperature and pressure plasmas and their applications. Covering topics such as carbon nanotubes, foodborne pathogens, and plasma formation, this book is an essential resource for research groups, plasma-based industries, plasma aerodynamics industries, metal and cutlery industries, medical institutions, researchers, and academicians.
Download or read book Applications of Atmospheric Plasmas written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface modification techniques using plasmas have generally been completed in a low pressure environment due to Pd (pressure x gap distance) considerations influencing the behavior of plasma generation. Generally, plasmas produced in a low pressure environment are of a non-thermal or cold nature. The basic feature of non-thermal plasmas is the majority of electrical energy used to generate the plasma is primarily used to produce energetic electrons for generating chemical species. Low pressure plasmas serve many purposes for materials processing. Since the plasma environment is contained within a closed vessel, the plasma can be controlled very easily. Low pressure plasmas have been used in many industries but the complexity associated with the large pumping stations and limitation to batch processing has motivated new work in the area of atmospheric plasmas. Atmospheric plasmas offer both economic and technical justification for use over low pressure plasmas. Since atmospheric plasmas can be operated at ambient conditions, lower costs associated with continuous processing and a decrease in the complexity of equipment validate atmospheric plasma processing as a next generation plasma-aided manufacturing processes. In an effort to advance acceptance of atmospheric plasma processing into industry, a process was developed, the dielectric barrier discharge (DBD), in order to generate a homogeneous and non-thermal plasma discharge at ambient conditions. The discharge was applied to the reduction of known food borne pathogens, deposition of thin film materials, and modification of lignocellulosic biomass.
Download or read book Advances in Cold Plasma Applications for Food Safety and Preservation written by Daniela Bermudez-Aguirre and published by Academic Press. This book was released on 2019-10-12 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold plasma is one of the newest technologies tested for food preservation. In the last decade, this novel approach has shown promising results as a disinfectant of food products and packaging materials. Cold plasma is also affordable, waterless, waste-free, and leaves no chemical residue on the product. This exciting new technology is covered thoroughly in Advances in Cold Plasma Applications for Food Preservation.The book presents the basic principles of cold plasma, examples of food products disinfected by cold plasma, and the challenges of using cold plasma to maximize microbial and spore inactivation. Some chapters are devoted to specific applications of the technology, such as the use of cold plasma for space missions. Insights about the required regulations for this technology are also discussed.Written and edited by experts in the field, Advances in Cold Plasma Applications for Food Preservation is aimed at academic researchers, food scientists, and government officials working on disinfection of food products. - Covers the basic principles of cold plasma - Presents novel information and updated results in microbial, spore, and enzyme inactivation in different food products - Explores the use of cold plasma in disinfection of food products, including packaged food and food packaging materials and discuss how some food components are modified - Includes the description of some of the current equipment devices and the requirements to design specific food processing systems - Investigates specific uses of cold plasma in some applications such as space food - Details current regulatory status of cold plasma for food applications
Download or read book Nonthermal Processing Technologies for Food written by Howard Q. Zhang and published by John Wiley & Sons. This book was released on 2011-02-04 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonthermal Processing Technologies for Food offers a comprehensive review of nonthermal processing technologies that are commercial, emerging or over the horizon. In addition to the broad coverage, leading experts in each technology serve as chapter authors to provide depth of coverage. Technologies covered include: physical processes, such as high pressure processing (HPP); electromagnetic processes, such as pulsed electric field (PEF), irradiation, and UV treatment; other nonthermal processes, such as ozone and chlorine dioxide gas phase treatment; and combination processes. Of special interest are chapters that focus on the "pathway to commercialization" for selected emerging technologies where a pathway exists or is clearly identified. These chapters provide examples and case studies of how new and nonthermal processing technologies may be commercialized. Overall, the book provides systematic knowledge to industrial readers, with numerous examples of process design to serve as a reference book. Researchers, professors and upper level students will also find the book a valuable text on the subject.
