Download or read book New Methods of Polymer Synthesis written by J.R. Ebdon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most practitioners and students of polymer chemistry are familiar, in general terms at least, with the established methods of polymer synthesis - radical, anionic, cationic and coordination addition polymerization, and stepwise con densation and rearrangement polymerization. These methods are used to synthesize the majority of polymers used in the manufacture of commercially important plastics, fibres, resins and rubbers, and are covered in most introduc tory polymer chemistry textbooks and in most undergraduate and graduate courses on polymer science. Fewer polymer chemists, however, have much familiarity with more recent developments in methods of polymer synthesis, unless they have been specifically involved for some time in the synthesis of speciality polymers. These developments include not only refinements to established methods but also new mechanisms of polymerization, such as group transfer and metathesis polymerization and novel non-polymerization routes to speciality polymers involving, for example, the chemical modification of preformed polymers or the linking together of short terminally functionalized blocks.
Download or read book New Methods Polymer Synthesis written by J. R. Ebdon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most practitioners and students of polymer chemistry are familiar, in general terms at least, with the established methods of polymer synthesis - radical, anionic, cationic and coordination addition polymerization, and stepwise con densation and rearrangement polymerization. These methods are used to synthesize the majority of polymers used in the manufacture of commercially important plastics, fibres, resins and rubbers, and are covered in most introduc tory polymer chemistry textbooks and in most undergraduate and graduate courses on polymer science. Fewer polymer chemists, however, have much familiarity with more recent developments in methods of polymer synthesis, unless they have been specifically involved for some time in the synthesis of speciality polymers. These developments include not only refinements to established methods but also new mechanisms of polymerization, such as group transfer and metathesis polymerization and novel non-polymerization routes to speciality polymers involving, for example, the chemical modification of preformed polymers or the linking together of short terminally functionalized blocks.
Download or read book Polymer Synthesis Theory and Practice written by Dietrich Braun and published by Springer Science & Business Media. This book was released on 2006-10-14 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first English edition of this book was pubUshed in 1971 with the late Prof. Dr. Werner Kern as coauthor. In 1997, for the preparation of the third edition, Prof. Dr. Helmut Ritter joined the team of authors and in 2001 Prof. Dr. Brigitte Voit and Prof. Dr. Matthias Rehahn complemented this team. The change in authors has not altered the basic concept of this 4th edition: again we were not aimed at compiling a comprehensive collection of recipes. In stead, we attempted to reach a broader description of the general methods and techniques for the synthesis, modification, and characterization of macromo- cules, supplemented by 105 selected and detailed experiments and by sufficient theoretical treatment so that no additional textbook be needed in order to under stand the experiments. In addition to the preparative aspects we have also tried to give the reader an impression of the relation of chemical structure and mor phology of polymers to their properties, as well as of areas of their application.
Download or read book New Methods for Polymer Synthesis written by W.J. Mijs and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The art and science of macromolecular architecture is based on synthesis, analysis, processing, and evaluation of physical properties of polymers. The growing specificity of available synthetic methods and the increasing refinement of analytical and physical analysis are gradually providing a deeper insight into structure-property relationships of polymers, upon which many applications can be based. This book deals with recent methods for polymer synthesis. Those that lead to specific structures have been selected especially. Background, mechanism scope and limitations, and illustrative procedures are given for each method. With this layout the editor hopes that the book will provide a practical guideline, for the synthetic polymer chemist in industry or at a university graduate school, on how to apply the methods in the design of new polymer structures. The editor is grateful to the authors not only for their contributions containing interesting new developments in polymer synthesis, but also for the way they have fitted their text into the general framework of the book. The elegant chemistry described in the following chapters will, it is hoped, inspire more organic chemists to apply their skills to polymer synthesis, where the beauty of organic chemistry in terms of structural control and reactivity may be even more apparent than in the low molecular field.
Download or read book New Methods of Polymer Synthesis written by Don Passey and published by Springer. This book was released on 1991-05-31 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most practitioners and students of polymer chemistry are familiar, in general terms at least, with the established methods of polymer synthesis - radical, anionic, cationic and coordination addition polymerization, and stepwise con densation and rearrangement polymerization. These methods are used to synthesize the majority of polymers used in the manufacture of commercially important plastics, fibres, resins and rubbers, and are covered in most introduc tory polymer chemistry textbooks and in most undergraduate and graduate courses on polymer science. Fewer polymer chemists, however, have much familiarity with more recent developments in methods of polymer synthesis, unless they have been specifically involved for some time in the synthesis of speciality polymers. These developments include not only refinements to established methods but also new mechanisms of polymerization, such as group transfer and metathesis polymerization and novel non-polymerization routes to speciality polymers involving, for example, the chemical modification of preformed polymers or the linking together of short terminally functionalized blocks.
Download or read book Synthesis of Polymers written by Dieter A. Schlüter and published by John Wiley & Sons. This book was released on 2012-05-23 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are huge macromolecules composed of repeating structural units. While polymer in popular usage suggests plastic, the term actually refers to a large class of natural and synthetic materials. Due to the extraordinary range of properties accessible, polymers have come to play an essential and ubiquitous role in everyday life - from plastics and elastomers on the one hand to natural biopolymers such as DNA and proteins on the other hand. The study of polymer science begins with understanding the methods in which these materials are synthesized. Polymer synthesis is a complex procedure and can take place in a variety of ways. This book brings together the "Who is who" of polymer science to give the readers an overview of the large field of polymer synthesis. It is a one-stop reference and a must-have for all Chemists, Polymer Chemists, Chemists in Industry, and Materials Scientists.
Download or read book New Methods of Polymer Synthesis written by J. R. Ebdon and published by . This book was released on 1995-10-31 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Synthesis written by and published by Springer Science & Business Media. This book was released on 2004-10-08 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. T. Takata, N. Kihara, Y. Furusho: Polyrotaxanes and Polycatenanes: Recent Advances in Syntheses and Applications of Polymers Comprising of Interlocked Structures.- 2. M. Suginome, Y. Ito: Transition Metal-Mediated Polymerization of Isocyanides.- 3. K. Osakada, D. Takeuchi: Coordination Polymerization of Dienes, Allenes and Methylenecycloalkanes.
Download or read book Polymer Synthesis and Characterization written by Stanley R. Sandler and published by Elsevier. This book was released on 1998-05-21 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This laboratory manual covers important techniques for polymer synthesis and characterization, and provides newcomers with a comprehensive introduction to the basic principles of highlighted techniques. The reader will benefit from the clear writing style and straightforward approach to fairly complex ideas. The book also provides references that the more advanced reader can use to obtain in-depth explanations of techniques. Polymer Synthesis and Characterization will serve as a useful resource for industrial technicians and researchers in polymer chemistry and physics, material science, and analytical chemistry. Combines the extensive industrial and teaching experience of the authors Introduces the user to the concept of "Good Manufacturing Practice" Presents experiments that are representative of a wide variety of polymerization and characterization methods Includes numerous references for more advanced students, technicians, and researcher
Download or read book New Frontiers in Polymer Synthesis written by Shiro Kobayashi and published by Springer Science & Business Media. This book was released on 2008-09-26 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is generally accepted that a new material is often developed by ?nding a new synthesis method of reaction or a new reaction catalyst. Historically, a typical example may be referred to as a Ziegler–Natta catalyst, which has allowed large-scale production of petroleum-based polyole?ns since the middle of the 20th century. New polymer synthesis, therefore, will hopefully lead to creation of new polymer materials in the 21st century. This special issue contributed by three groups focuses on recent advances in polymer synthesis methods, which handle the cutting-edge aspects of the advanced technology. The ?rst article by Yokozawa and coworkers contains an overview of the - action control in various condensation polymerizations (polycondensations). Advanced technologies enabled the control of stereochemistry (regio-, g- metrical-, and enantio-selections), chemoselectivity, chain topology, and st- chiometry of monomers, giving a high molecular weight polymer. It has been recognized for a long time, however, that polycondensation is a dif?cult p- cess in controlling the reaction pathway, because the reaction is of step-growth and the reactivity of monomers, oligomers, and polymers are almost the same during the reaction and hence, the molecular weight of polymers and its d- tribution (M /M ) are impossible to regulate. The authors’ group developed w n a new reaction system (chain-growth condensation polymerization), changing the nature of polycondensation from step-growth to chain-growth; namely the propagating chain-end is active, allowing for control of the product molecular weight as well as the distribution.
Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.
Download or read book Polymer Synthesis Theory and Practice written by Dietrich Braun and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Laboratory Manual contains detailed descriptions for the synthesis and characterization of macromolecules. Around 110 elaborated examples, consisting of descriptions of experiments, as well as sufficient theoretical explanations enable the reader to learn about the syntheses, modification, characterization and properties of polymers including recent developments. All experiments can be conducted with adequate laboratory equipment. Suitable for students in organic and polymer chemistry as well as for chemists in industry who want to acquaint themselves with the theoretical and practical aspects of macromolecular chemistry.
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Polymer Synthesis written by Guojian Wang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-11-23 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book systematically presents fundamental principles, properties, implementation methodologies, technologies and applications of polymer synthesis. Ring opening metathesis polymerization, click chemistry, macromolecular self-assembly, carbon nanomaterials and their modification with polymers are discussed in detail. With abundant illustrations, it is an essential reference for polymer chemists, material scientists, and graduate students.
Download or read book Polymer Chemistry written by Fred J. Davis and published by OUP Oxford. This book was released on 2004-09-30 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been designed to appeal to both chemists working in, and new to, the area of polymer synthesis. It contains detailed instructions for the preparation of a wide-range of polymers by a wide variety of different techniques, and describes how this synthetic methodology can be applied to the development of new materials. It includes details of well-established techniques,e.g. chain-growth or step-growth processes together with more up-to-date examples using methods such as atom-transfer radical polymerisation. Less-well known procedures are also included, e.g. electrochemical synthesis of conducting polymers and the preparation of liquid crystalline elastomers with highly ordered structures. Other topics covered include general polymerisation methodology, controlled/'living' polymerisation methods, the formation of cyclic oligomers during step-growth polymerisation, the synthesis of conducting polymers based on heterocyclic compounds, dendrimers, the preparation of imprinted polymers and liquid crystalline polymers. The main bulk of the text is preceded by an introductory chapter detailing some of the techniques available to the scientist for the characterisation of polymers, both in terms of their chemical composition and in terms of their properties as materials. The book is intended not only for the specialist in polymer chemistry, but also for the organic chemist with little experience who requires a practical introduction to the field.
Download or read book Polymer Synthesis written by Paul Rempp and published by Wiley-VCH. This book was released on 1998-12-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preparative Methods of Polymer Chemistry written by Wayne R. Sorenson and published by Wiley-Interscience. This book was released on 2001-04-13 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The long-awaited Third Edition of the classic in polymer synthesis Thirty years ago, the Second Edition of Preparative Methods of Polymer Chemistry further established its reputation as the laboratory bible for polymer synthesis. The last three decades have witnessed a deeper understanding of the principles involved in preparing and processing polymers, leading to tremendous advances in polymer synthesis. Guiding practicing scientists through the methods of synthesizing polymers, the Third Edition retains theory and vital protocols, while revising and updating the sections on synthesis, fabrication techniques, and characterization methods. Delving into the physical and chemical aspects of polymer processing, each chapter includes a discussion of the relevant background and principles, enabling the scientist to apply synthetic techniques intelligently. The Third Edition also contains sections on current topics such as: * Extended-chain polymer technology * High-temperature and high-performance polymers * Carbon fibers * Electrically conductive polymers * Group-transfer polymerization * Composites Preparative Methods of Polymer Chemistry, Third Edition provides essential information for both students and practicing polymer scientists.
