Download or read book Near Net Shape Manufacturing of Miniature Spur Gears by Wire Spark Erosion Machining written by Kapil Gupta and published by Springer. This book was released on 2016-08-18 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work describes an experimental investigation with the aim to evaluate and establish wire spark erosion machining (WSEM) as a viable alternative for high quality miniature gear manufacturing. External spur type miniature brass (ASTM 858) gears with 12 teeth, 9.8 mm outside diameter and 5 mm face width were manufactured by WSEM. The research work was accomplished in four distinct experimental stages viz., preliminary, pilot, main and confirmation. The aim, scope and findings of each stage are progressively presented and discussed. In essence, the investigation found that it was possible to manufacture miniature gears to high quality by using WSEM. Gears up to DIN 5 quality with a good surface finish (1.2 μm average roughness) and satisfactory surface integrity were achieved. The results suggest that WSEM should be considered a viable alternative to conventional miniature gear manufacturing techniques and that in some instances it may even be superior. This work will prove useful to researchers and professionals in the field of miniature and micro-scale manufacturing and machining.
Download or read book Advances in Manufacturing Technology XXXI written by J. Gao and published by IOS Press. This book was released on 2017-08-23 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need to keep pace with the accelerating globalization of manufacturing in the 21st century has produced rapid advances in manufacturing research, development and innovation. This book presents the proceedings of the 15th International Conference on Manufacturing Research (ICMR 2017), which also incorporated the 32nd National Conference on Manufacturing Research (NCMR) and was held at the University of Greenwich, London, UK, in September 2017. The conference brings together a broad community of researchers who share the common goal of developing and managing the technologies and operations key to sustaining the success of manufacturing businesses. The book is divided into 13 parts, covering topics such as advanced manufacturing technologies (including additive, ultra-precision and nano-manufacturing); manufacturing systems (digital and cyber-physical systems); product design and development (including lifecycle management and supply-chain collaboration); information and communication (including innovation and knowledge management); and manufacturing management (including lean, sustainable and cost engineering). With its comprehensive overview of current developments, this book will be of interest to all those involved in manufacturing today.
Download or read book Fabrication and Processing of Shape Memory Alloys written by Kush Mehta and published by Springer. This book was released on 2018-09-01 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases different processes of fabrication and processing applied to shape memory alloys. It provides details and collective information on working principles, process mechanisms, salient features, novel aspects, process capabilities, properties of material and unique applications of shape memory alloys. The recent progress on fabrication and processing are specially addressed in this book. It covers major topics of manufacturing such as machining, joining, welding and processing of shape memory alloys.
Download or read book Comprehensive Materials Finishing written by M.S.J. Hashmi and published by Elsevier. This book was released on 2016-08-29 with total page 1467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finish Manufacturing Processes are those final stage processing techniques which are deployed to bring a product to readiness for marketing and putting in service. Over recent decades a number of finish manufacturing processes have been newly developed by researchers and technologists. Many of these developments have been reported and illustrated in existing literature in a piecemeal manner or in relation only to specific applications. For the first time, Comprehensive Materials Finishing, Three Volume Set integrates a wide body of this knowledge and understanding into a single, comprehensive work. Containing a mixture of review articles, case studies and research findings resulting from R & D activities in industrial and academic domains, this reference work focuses on how some finish manufacturing processes are advantageous for a broad range of technologies. These include applicability, energy and technological costs as well as practicability of implementation. The work covers a wide range of materials such as ferrous, non-ferrous and polymeric materials. There are three main distinct types of finishing processes: Surface Treatment by which the properties of the material are modified without generally changing the physical dimensions of the surface; Finish Machining Processes by which a small layer of material is removed from the surface by various machining processes to render improved surface characteristics; and Surface Coating Processes by which the surface properties are improved by adding fine layer(s) of materials with superior surface characteristics. Each of these primary finishing processes is presented in its own volume for ease of use, making Comprehensive Materials Finishing an essential reference source for researchers and professionals at all career stages in academia and industry. Provides an interdisciplinary focus, allowing readers to become familiar with the broad range of uses for materials finishing Brings together all known research in materials finishing in a single reference for the first time Includes case studies that illustrate theory and show how it is applied in practice
Download or read book Advanced Gear Manufacturing and Finishing written by Kapil Gupta and published by Academic Press. This book was released on 2017-07-13 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Gear Manufacturing and Finishing offers detailed coverage of advanced manufacturing technologies used in the production of gears, including new methods such as spark erosion machining, abrasive water jet machining, additive layer manufacturing, laser shaping, and sustainable manufacturing of gears. The industry in this area is constantly producing new settings where gears must endure ever increasing stresses, strains, and temperatures. Advanced methods in manufacturing, finishing, and surface property enhancement have emerged in recent years to meet these challenges. This unique book takes a critical look at the state-of-the-art research into these new methods, and the latest improvements to classic technologies in both gear manufacturing and finishing. This book is essential reading for researchers and engineers working in the fields of powertrain manufacturing, gear technology, and advanced manufacturing technologies. Describes the machining systems, main components, and working procedures with the help of diagrams and photos. Demonstrates the mechanisms and capabilities of new methods. Shows improvements to a range of gear manufacturing and finishing technologies. Provides a critical review of recent research in a range of fields relevant to gear manufacturing technologies.
Download or read book Spark Erosion Machining written by Neelesh Kumar Jain and published by CRC Press. This book was released on 2020-11-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gaps where limited resources are available on comprehensive coverage of spark erosion machining (SEM) based processes. It provides researchers and scholars a vast amount of information on recent research on the subject. It also serves as a resource of novel and specialized applications of spark erosion machining and its variants, for students and faculties involved with advanced machining processes. Some salient features of the book: Describes various important aspects of spark-erosion based processes including their derived and hybrid processes. Includes a broad scope of SEM applications from industrial, commercial, and scientific to aerospace, automobiles and biomedical domains. Covers a wide range of materials applications of SE-based processes to different exotic and difficult-to-machine materials, i.e. superalloys, composites, ceramics, shape memory alloys, etc. Provides details micro version of EDM and WEDM processes and their specialized applications.
Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Introduction to Basic Manufacturing Processes and Workshop Technology written by Rajender Singh and published by New Age International. This book was released on 2006-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The basic need is to provide theoretical and practical knowledge of manufacturing processes and workshop technology to all the engineering students. This book covers most of the syllabus of manufacturing processes/technology, workshop technology and workshop practices for engineering (diploma and degree) classes prescribed by different universities and state technical boards.
Download or read book Machining of Metal Matrix Composites written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Advances in Unconventional Machining and Composites written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-22 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The volume discusses improvements on well-established unconventional machining processes and novel or hybrid machining processes as well as properties, fabrication techniques and machining of composite materials. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Micro electrical Discharge Machining Processes written by Golam Kibria and published by Springer. This book was released on 2019-02-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.
Download or read book Proceedings of International Conference on Intelligent Manufacturing and Automation written by Hari Vasudevan and published by Springer Nature. This book was released on 2020-06-30 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the Second International Conference on Intelligent Manufacturing and Automation (ICIMA 2020), which was jointly organized by the Departments of Mechanical Engineering and Production Engineering at Dwarkadas J. Sanghvi College of Engineering (DJSCE), Mumbai, and by the Indian Society of Manufacturing Engineers (ISME). Covering a range of topics in intelligent manufacturing, automation, advanced materials and design, it focuses on the latest advances in e.g. CAD/CAM/CAE/CIM/FMS in manufacturing, artificial intelligence in manufacturing, IoT in manufacturing, product design & development, DFM/DFA/FMEA, MEMS & nanotechnology, rapid prototyping, computational techniques, nano- & micro-machining, sustainable manufacturing, industrial engineering, manufacturing process management, modelling & optimization techniques, CRM, MRP & ERP, green, lean & agile manufacturing, logistics & supply chain management, quality assurance & environmental protection, advanced material processing & characterization of composite & smart materials. The book is intended as a reference guide for future researchers, and as a valuable resource for students in graduate and doctoral programmes.
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gear Materials Properties and Manufacture written by Joseph R. Davis and published by ASM International. This book was released on 2005 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: All of the critical technical aspects of gear materials technology are addressed in this new reference work. Gear Materials, Properties, and Manufacture is intended for gear metallurgists and materials specialists, manufacturing engineers, lubrication technologists, and analysts concerned with gear failures who seek a better understanding of gear performance and gear life. This volume complements other gear texts that emphasize the design, geometry, and theory of gears. The coverage begins with an overview of the various types of gears used, important gear terminology, applied stresses and strength requirements associated with gears, and lubrication and wear. This is followed by in-depth treatment of metallic (ferrous and nonferrous alloys) and plastic gear materials. Emphasis is on the properties of carburized steels, the material of choice for high-performance power transmission gearing.
Download or read book Advanced Machining Processes written by Hassan Abdel-Gawad El-Hofy and published by McGraw Hill Professional. This book was released on 2005-03-22 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s stringent design requirements and difficult-to-machine materials such as tough super alloys, ceramics, and composites, have made traditional machining processes costly and obsolete. As a result, manufacturers and machine design engineers are turning to advance machining processes. These machining processes utilizes electrical, chemical, and optimal sources of energy to bind, form and cut materials. El-Hofy rigorously explains how each of these advanced machining process work, their machining system components, process variables and industrial applications, making this book the perfect guide for anyone designing, researching or converting to a more advance machining process.
