Download or read book Multi Threshold CMOS Digital Circuits written by Mohab Anis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent survey of state-of-the-art techniques discusses the MTCMOS technology that has emerged as an increasingly popular technique to control the escalating leakage power, while maintaining high performance. It addresses the leakage problem in a number of designs for combinational, sequential, dynamic and current-steering logic.
Download or read book Multi Threshold Cmos Digital Circuits Managing Leakage Power written by Anis and published by . This book was released on 2009-10-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Communication and Networking written by Tai-hoon Kim and published by Springer. This book was released on 2011-12-03 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volume set, CCIS 265 and 266, constitutes the refereed proceedings of the International Conference, FGCN 2011, held as Part of the Future Generation Information Technology Conference, FGIT 2011, Jeju Island, Korea, in December 2011. The papers presented were carefully reviewed and selected from numerous submissions and focuse on the various aspects of future generation communication and networking.
Download or read book Power Management of Digital Circuits in Deep Sub Micron CMOS Technologies written by Stephan Henzler and published by Springer Science & Business Media. This book was released on 2006-11-24 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth overview of design and implementation of leakage reduction techniques. The focus is on applicability, technology dependencies, and scalability. The book mainly deals with circuit design but also addresses the interface between circuit and system level design on the one side and between circuit and physical design on the other side.
Download or read book Introduction to Low Power Design in VLSIs written by Patrick Lee and published by Lulu.com. This book was released on 2011-12-12 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses one increasingly important issue in the VLSI design: low power. It covers the following topics: (a) basic concepts of low-power design, (b) low-power design methods and applications in industry chips, and (c) commercial CAD tools on low-power design. This book discusses the concepts, a set of known methods, industry cases and CAD tools on the low power design. It is organized in four chapters and a glossary is provided at the end of the book.
Download or read book Extreme Low Power Mixed Signal IC Design written by Armin Tajalli and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design exibility and power consumption in addition to the cost, have always been the most important issues in design of integrated circuits (ICs), and are the main concerns of this research, as well. Energy Consumptions: Power dissipation (P ) and energy consumption are - diss pecially importantwhen there is a limited amountof power budgetor limited source of energy. Very common examples are portable systems where the battery life time depends on system power consumption. Many different techniques have been - veloped to reduce or manage the circuit power consumption in this type of systems. Ultra-low power (ULP) applications are another examples where power dissipation is the primary design issue. In such applications, the power budget is so restricted that very special circuit and system level design techniquesare needed to satisfy the requirements. Circuits employed in applications such as wireless sensor networks (WSN), wearable battery powered systems [1], and implantable circuits for biol- ical applications need to consume very low amount of power such that the entire system can survive for a very long time without the need for changingor recharging battery[2–4]. Using newpowersupplytechniquessuchas energyharvesting[5]and printable batteries [6], is another reason for reducing power dissipation. Devel- ing special design techniques for implementing low power circuits [7–9], as well as dynamic power management (DPM) schemes [10] are the two main approaches to control the system power consumption. Design Flexibility: Design exibility is the other important issue in modern in- grated systems.
Download or read book Integrated Circuit and System Design written by Enrico Macii and published by Springer Science & Business Media. This book was released on 2004-09-07 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th International Workshop on Power and Timing Optimization and Simulation, PATMOS 2004, held in Santorini, Greece in September 2004. The 85 revised papers presented together with abstracts of 6 invited presentations were carefully reviewed and selected from 152 papers submitted. The papers are organized in topical sections on buses and communication, circuits and devices, low power issues, architectures, asynchronous circuits, systems design, interconnect and physical design, security and safety, low-power processing, digital design, and modeling and simulation.
Download or read book Advanced Computing written by Natarajan Meghanathan and published by Springer Science & Business Media. This book was released on 2010-12-14 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the third of three parts of the refereed proceedings of the First International Conference on Computer Science and Information Technology, CCSIT 2010, held in Bangalore, India, in January 2011. The 46 revised full papers presented in this volume were carefully reviewed and selected. The papers are organized in topical sections on soft computing, such as AI, Neural Networks, Fuzzy Systems, etc.; distributed and parallel systems and algorithms; security and information assurance; ad hoc and ubiquitous computing; wireless ad hoc networks and sensor networks.
Download or read book Soft Error Mechanisms Modeling and Mitigation written by Selahattin Sayil and published by Springer. This book was released on 2016-02-25 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to various radiation soft-error mechanisms such as soft delays, radiation induced clock jitter and pulses, and single event (SE) coupling induced effects. In addition to discussing various radiation hardening techniques for combinational logic, the author also describes new mitigation strategies targeting commercial designs. Coverage includes novel soft error mitigation techniques such as the Dynamic Threshold Technique and Soft Error Filtering based on Transmission gate with varied gate and body bias. The discussion also includes modeling of SE crosstalk noise, delay and speed-up effects. Various mitigation strategies to eliminate SE coupling effects are also introduced. Coverage also includes the reliability of low power energy-efficient designs and the impact of leakage power consumption optimizations on soft error robustness. The author presents an analysis of various power optimization techniques, enabling readers to make design choices that reduce static power consumption and improve soft error reliability at the same time.
Download or read book Low Power Design of Nanometer FPGAs written by Hassan Hassan and published by Morgan Kaufmann. This book was released on 2009-09-14 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power Design of Nanometer FPGAs Architecture and EDA is an invaluable reference for researchers and practicing engineers concerned with power-efficient, FPGA design. State-of-the-art power reduction techniques for FPGAs will be described and compared. These techniques can be applied at the circuit, architecture, and electronic design automation levels to describe both the dynamic and leakage power sources and enable strategies for codesign. Low-power techniques presented at key FPGA design levels for circuits, architectures, and electronic design automation, form critical, "bridge" guidelines for codesign Comprehensive review of leakage-tolerant techniques empowers designers to minimize power dissipation Provides valuable tools for estimating power efficiency/savings of current, low-power FPGA design techniques
Download or read book Low Power VLSI Circuits and Systems written by Ajit Pal and published by Springer. This book was released on 2014-11-17 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive coverage of different aspects of low power circuit synthesis at various levels of design hierarchy; starting from the layout level to the system level. For a seamless understanding of the subject, basics of MOS circuits has been introduced at transistor, gate and circuit level; followed by various low-power design methodologies, such as supply voltage scaling, switched capacitance minimization techniques and leakage power minimization approaches. The content of this book will prove useful to students, researchers, as well as practicing engineers.
Download or read book Proceedings of the International Conference on Microelectronics written by and published by . This book was released on 2003 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Power CMOS Wireless Communications written by Samuel Sheng and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power CMOS Wireless Communications: A Wideband CDMA System Design focuses on the issues behind the development of a high-bandwidth, silicon complementary metal-oxide silicon (CMOS) low-power transceiver system for mobile RF wireless data communications. In the design of any RF communications system, three distinct factors must be considered: the propagation environment in question, the multiplexing and modulation of user data streams, and the complexity of hardware required to implement the desired link. None of these can be allowed to dominate. Coupling between system design and implementation is the key to simultaneously achieving high bandwidth and low power and is emphasized throughout the book. The material presented in Low-Power CMOS Wireless Communications: A Wideband CDMA System Design is the result of broadband wireless systems research done at the University of California, Berkeley. The wireless development was motivated by a much larger collaborative effort known as the Infopad Project, which was centered on developing a mobile information terminal for multimedia content - a wireless `network computer'. The desire for mobility, combined with the need to support potentially hundreds of users simultaneously accessing full-motion digital video, demanded a wireless solution that was of far lower power and higher data rate than could be provided by existing systems. That solution is the topic of this book: a case study of not only wireless systems designs, but also the implementation of such a link, down to the analog and digital circuit level.
Download or read book Minimizing and Exploiting Leakage in VLSI Design written by Nikhil Jayakumar and published by Springer Science & Business Media. This book was released on 2009-12-02 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power consumption of VLSI (Very Large Scale Integrated) circuits has been growing at an alarmingly rapid rate. This increase in power consumption, coupled with the increasing demand for portable/hand-held electronics, has made power consumption a dominant concern in the design of VLSI circuits today. Traditionally, dynamic (switching) power has dominated the total power consumption of an IC. However, due to current scaling trends, leakage power has now become a major component of the total power consumption in VLSI circuits. Leakage power reduction is especially important in portable/hand-held electronics such as cell-phones and PDAs. This book presents two techniques aimed at reducing leakage power in digital VLSI ICs. The first technique reduces leakage through the selective use of high threshold voltage sleep transistors. The second technique reduces leakage by applying the optimal Reverse Body Bias (RBB) voltage. This book also shows readers how to turn the leakage problem into an opportunity, through the use of sub-threshold logic.
Download or read book Proceedings of the Midwest Symposium on Circuits and Systems written by and published by . This book was released on 2003 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi voltage CMOS Circuit Design written by Volkan Kursun and published by John Wiley & Sons. This book was released on 2006 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth treatment of various power reduction and speed enhancement techniques based on multiple supply and threshold voltages. A detailed discussion of the sources of power consumption in CMOS circuits will be provided whilst focusing primarily on identifying the mechanisms by which sub-threshold and gate oxide leakage currents are generated. The authors present a comprehensive review of state-of-the-art dynamic, static supply and threshold voltage scaling techniques and discuss the pros and cons of supply and threshold voltage scaling techniques.
Download or read book Leakage in Nanometer CMOS Technologies written by Siva G. Narendra and published by Springer Science & Business Media. This book was released on 2006-03-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers in detail promising solutions at the device, circuit, and architecture levels of abstraction after first explaining the sensitivity of the various MOS leakage sources to these conditions from the first principles. Also treated are the resulting effects so the reader understands the effectiveness of leakage power reduction solutions under these different conditions. Case studies supply real-world examples that reap the benefits of leakage power reduction solutions as the book highlights different device design choices that exist to mitigate increases in the leakage components as technology scales.
