Download or read book Modern Blast Furnace Ironmaking written by Maarten Geerdes and published by IOS Press. This book was released on 2009 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This publication was and can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management. The latter will benefit to solve operational problems and process optimization issues." --Book Jacket.
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2020-11-04 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Blast Furnace Ironmaking – An Introduction (Fourth Edition, 2020) describes the principles of the blast furnace process. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background of the blast furnace process is clarified. The book focuses on the control of the process with respect to thermal control, gas flow control and casthouse operation. In this book, all essential process details are described and a special focus is on cost optimization by low coke rates and on management of the process in case of disturbances and upsets. The optimization of the blast furnace is not only based on “best practice transfer”, but also requires conceptual understanding why a measure works in some cases and not in other cases. In other words, operational improvement is not only based on know–how, but as well on know–why. This publication can be used as an introductory text for students of metallurgy as well as for blast furnace operators and management.
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by IOS Press. This book was released on 2015-04-07 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the blast furnace process for operators. As a starting point, the blast furnace is seen as a simple iron ore melter, while gradually the physical, chemical and metallurgical background is clarified. Operational observations, challenges and remedies are explained from this perspective. Optimization of the blast furnace process is not only based on “best practice transfer”, but also requires conceptual understanding of what works when. In other words: operational improvement is not only based on know–how, but on know–why as well. With Modern Blast Furnace Ironmaking – An Introduction (Third Edition, 2015) the reader has a compact compendium of the blast furnace process available: by operators and for operators and for those who are preparing to become operators.
Download or read book Blast Furnace Ironmaking written by Ian Cameron and published by Elsevier. This book was released on 2019-10-22 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blast Furnace Ironmaking: Analysis, Control, and Optimization uses a fundamental first principles approach to prepare a blast furnace mass and energy balance in ExcelTM. Robust descriptions of the main equipment and systems, process technologies, and best practices used in a modern blast furnace plant are detailed. Optimization tools are provided to help the reader find the best blast furnace fuel mix and related costs, maximize output, or evaluate other operational strategies using the ExcelTM model that the reader will develop. The first principles blast furnace ExcelTM model allows for more comprehensive process assessments than the 'rules of thumb' currently used by the industry. This book is suitable for undergraduate and postgraduate science and engineering students in the fields of chemical, mechanical, metallurgical and materials engineering. Additionally, steel company engineers, process technologists, and management will find this book useful with its fundamental approach, best practices description, and perspective on the future. - Provides sample problems, answers and assignments for each chapter - Explores how to optimize the blast furnace operation while maintaining required temperatures and gas flowrates - Describes all major blast furnace equipment and best practices - Features blast furnace operating data from five continents
Download or read book Modern Blast Furnace Ironmaking written by M. Geerdes and published by . This book was released on 2015 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2016-09-02 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes improvements in the iron and steel making process in the past few decades. It also presents new and improved solutions to producing high quality products with low greenhouse emissions. In addition, it examines legislative regulations regarding greenhouse emissions all around the world and how to control these dangerous emissions in iron and steel making plants.
Download or read book The Iron Blast Furnace written by J. G. Peacey and published by Elsevier. This book was released on 2016-06-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Iron Blast Furnace: Theory and Practice presents theoretical, experimental, and operational evidence about the iron blast furnace as well as a mathematical description of its operation. This book includes a set of equations that accurately describe stoichiometric and enthalpy balances for the process and which are consistent with observed temperatures and compositions in the furnace stack. These equations, which have been devised on the basis of the Rist approach, show the effects of altering any blast-furnace variable on the other operating requirements of the process. This monograph is comprised of 14 chapters and begins with a brief description of the blast-furnace process. The next chapter takes a look inside the furnace, paying particular attention to its behavior in front of the tuyères and the kinetics of the coke gasification reaction. The reader is then introduced to the thermodynamics and stoichiometry of the blast-furnace process; enthalpy balance for the bottom segment of the furnace; the effects of tuyères injectants on blast-furnace operations; and blast-furnace optimization by linear programming. A number of important variables covered by the equations are discussed, including hydrocarbon injection at the tuyères, oxygen enrichment of the blast, moisture, limestone decomposition, coke reactivity, and metalloid reduction. The effects of many of these variables are illustrated numerically in the text while others are demonstrated in sets of problems that follow each chapter. This text will be a valuable resource for metallurgists and materials scientists.
Download or read book Basic Concepts of Iron and Steel Making written by Sujay Kumar Dutta and published by Springer Nature. This book was released on 2020-03-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of iron and steel making, including the physical chemistry, thermodynamics and key concepts, while also discussing associated problems and solutions. It guides the reader through the production process from start to finish, covers the raw materials, and addresses the types of processes and reactions involved in both conventional and alternative methods. Though primarily intended as a textbook for students of metallurgical engineering, the book will also prove a useful reference for professionals and researchers working in this area.
Download or read book The Knight and the Blast Furnace written by Alan R. Williams and published by BRILL. This book was released on 2003 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suit of armour distinguishes the European Middle Ages & Renaissance. This book tells its story from the 14th to the 17th century, and the making of its steel. The metallurgy of 600 armours has been analysed, and their probable effectiveness in battle assessed.
Download or read book Introduction to Refractories for Iron and Steelmaking written by Subir Biswas and published by Springer Nature. This book was released on 2020-06-09 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book promotes understanding of the raw material selection, refractory design, tailor-made refractory developments, refractory properties, and methods of application. It provides a complete analysis of modern iron and steel refractories. It describes the daily demands on modern refractories and describes how these needs can be addressed or improved upon to help achieve the cleanest and largest yields of iron and steel. The text contains end-of-chapter summaries to help reinforce difficult concepts. It also includes problems at the end of chapters to confirm the reader's understanding of topics such as hoop stress modeling in steel ladle and vessels, establishment of thermal gradient modeling , refractory corrosion dynamics, calculation of Blast furnace trough dimension based on thermal modeling, to name a few. Led by editors with backgrounds in both academia and industry, this book can be used in college courses, as a reference for industry professionals, and as an introduction to the technology for those making the transition to industry. Stands as a comprehensive introduction to the science and technology of modern steel and iron-making refractories that examines the processes, construction, and potential improvement of refractory performance and sustainability; Serves as a versatile resource appropriate for all levels, from the student to industry novices to professionals; Reinforces difficult-to-grasp concepts with end-of-chapter summaries; Maximizes reader understanding of key topics, such as refractory selection for steel ladle and vessels, and their corrosion dynamics, with real life problems.
Download or read book Mathematical Modeling of the Blast Furnace Process written by Andrey Dmitriev and published by Cambridge Scholars Publishing. This book was released on 2019-10-23 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of extensive research on the mathematical modelling of the blast furnace process. It describes the mathematical models utilised, providing insights into two-dimensional models of gas dynamics, heat transfer and reduction, the cohesion zone, and the balance equilibrium model. On the basis of these models, it details a method for the analytical study of the blast-furnace process, which essentially complements the experimental methods used in practice. Examples of the solution of practical problems of blast furnace smelting are also provided, and the mathematical models highlighted here can be used in research and design institutes, at metallurgical enterprises and for higher education institutions in the training of students in metallurgical specialties.
Download or read book Ironmaking written by Alexander Babich and published by . This book was released on 2008 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Blast Furnace Ironmaking written by Anil Kumar Biswas and published by . This book was released on 1981 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Slags written by Nadine M. Piatak and published by Royal Society of Chemistry. This book was released on 2021-08-13 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive reference on the environmental geochemistry and resource potential of metallurgical slags
Download or read book The Traditional Chinese Iron Industry and Its Modern Fate written by Donald B. Wagner and published by Routledge. This book was released on 2013-11-05 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the economic history of the traditional Chinese iron industry in the nineteenth and twentieth centuries, with particular emphasis on the interactions among technological, economic and geographic factors. The traditional technology of iron production is described together with the ways in which it changed and developed in response to upheavals wrought by foreign competition, war and revolution and by the growth in China of a modern iron industry. Many of the book's findings are counter-intuitive, and will provide food for thought in the study of Third World industrial development. The author has written widely on the history of science and technology in China, and is currently engaged in writing the volume on ferrous metallurgy for Joseph Needham's Science and Civilisation in China.
Download or read book Clean Ironmaking and Steelmaking Processes written by Pasquale Cavaliere and published by Springer. This book was released on 2019-07-18 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the available technologies that can be employed to reduce energy consumption and greenhouse emissions in the steel- and ironmaking industries. Ironmaking and steelmaking are some of the largest emitters of carbon dioxide (over 2Gt per year) and have some of the highest energy demand (25 EJ per year) among all industries; to help mitigate this problem, the book examines how changes can be made in energy efficiency, including energy consumption optimization, online monitoring, and energy audits. Due to negligible regulations and unparalleled growth in these industries during the past 15-20 years, knowledge of best practices and innovative technologies for greenhouse gas remediation is paramount, and something this book addresses. Presents the most recent technological solutions in productivity analyses and dangerous emissions control and reduction in steelmaking plants; Examines the energy saving and emissions abatement efficiency for potential solutions to emission control and reduction in steelmaking plants; Discusses the application of the results of research conducted over the last ten years at universities, research centers, and industrial institutions.
Download or read book Blast Furnace Phenomena and Modelling written by The Iron and Steel Institute of Japan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: As ironmakers are well aware, it was only a few decades ago that the blast furnace was viewed as a strange 'black box'. Recently, however, various in-furnace phenomena have become the subject of serious scientific study, largely as the result of the 'dissection' of dead furnaces, together with the development of advanced monitoring and control techniques. In this way, a new frontier has been opened within the venerable domain of metallurgy. In the light of these new developments, the Committee on Reaction within Blast Furnaces was set up in March 1977 by the Joint Society ofIron and Steel Basic Research - a cooperative research organization of the Iron and Steel Institute of Japan (ISIJ), the Japan Institute of Metals (JIM) and the Japan Society for the Promotion of Science (JSPS). Consisting of twenty-six members and advisors drawn from the fields of academia and industry, this committee collected, discussed, and evaluated numerous papers during its five year commission. Particular attention was paid to the interpretation of findings drawn from the autopsy of dead furnaces, in the context of the live furnace state, and the correlation of data regarding cohesive zone configuration, level, and furnace performance. The results of this intense research activity are presented here in the hope that they will serve not only as a source of enrichment to the professional knowledge of researchers and operators, but also as textual material for graduate students in the field of metallurgy.
