Download or read book Thermodynamic Models written by Michael L. Michelsen and published by . This book was released on 2007 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Behavior written by Curtis H. Whitson and published by Society of Petroleum Engineers. This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Behavior provides the reader with the tools needed to solve problems requiring a description of phase behavior and specific pressure/volume/temperature (PVT) properties.
Download or read book Asphaltene Deposition written by Francisco M. Vargas and published by CRC Press. This book was released on 2018-05-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: As global consumption of fossil fuels such as oil increases, previously abundant sources have become depleted or plagued with obstructions. Asphaltene deposition is one of such obstructions which can significantly decrease the rate of oil production. This book offers concise yet thorough coverage of the complex problem of asphaltene precipitation and deposition in oil production. It covers fundamentals of chemistry, stabilization theories and mechanistic approaches of asphaltene behavior at high temperature and pressure. Asphaltene Deposition: Fundamentals, Prediction, Prevention, and Remediation explains techniques for experimental determination of asphaltene precipitation and deposition and different modeling tools available to forecast the occurrence and magnitude of asphaltene deposition in a given oil field. It discusses strategies for mitigation of asphaltene deposition using chemical inhibition and corresponding challenges, best practices for asphaltene remediation, current research, and case studies.
Download or read book Chemical Thermodynamics for Process Simulation written by Jürgen Gmehling and published by John Wiley & Sons. This book was released on 2019-06-10 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only textbook that applies thermodynamics to real-world process engineering problems This must-read for advanced students and professionals alike is the first book to demonstrate how chemical thermodynamics work in the real world by applying them to actual engineering examples. It also discusses the advantages and disadvantages of the particular models and procedures, and explains the most important models that are applied in process industry. All the topics are illustrated with examples that are closely related to practical process simulation problems. At the end of each chapter, additional calculation examples are given to enable readers to extend their comprehension. Chemical Thermodynamics for Process Simulation instructs on the behavior of fluids for pure fluids, describing the main types of equations of state and their abilities. It discusses the various quantities of interest in process simulation, their correlation, and prediction in detail. Chapters look at the important terms for the description of the thermodynamics of mixtures; the most important models and routes for phase equilibrium calculation; models which are applicable to a wide variety of non-electrolyte systems; membrane processes; polymer thermodynamics; enthalpy of reaction; chemical equilibria, and more. -Explains thermodynamic fundamentals used in process simulation with solved examples -Includes new chapters about modern measurement techniques, retrograde condensation, and simultaneous description of chemical equilibrium -Comprises numerous solved examples, which simplify the understanding of the often complex calculation procedures, and discusses advantages and disadvantages of models and procedures -Includes estimation methods for thermophysical properties and phase equilibria thermodynamics of alternative separation processes -Supplemented with MathCAD-sheets and DDBST programs for readers to reproduce the examples Chemical Thermodynamics for Process Simulation is an ideal resource for those working in the fields of process development, process synthesis, or process optimization, and an excellent book for students in the engineering sciences.
Download or read book Process and Chemical Engineering written by and published by . This book was released on 2002 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.
Download or read book Chemical Process Design and Simulation Aspen Plus and Aspen Hysys Applications written by Juma Haydary and published by John Wiley & Sons. This book was released on 2019-01-16 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and example oriented text for the study of chemical process design and simulation Chemical Process Design and Simulation is an accessible guide that offers information on the most important principles of chemical engineering design and includes illustrative examples of their application that uses simulation software. A comprehensive and practical resource, the text uses both Aspen Plus and Aspen Hysys simulation software. The author describes the basic methodologies for computer aided design and offers a description of the basic steps of process simulation in Aspen Plus and Aspen Hysys. The text reviews the design and simulation of individual simple unit operations that includes a mathematical model of each unit operation such as reactors, separators, and heat exchangers. The author also explores the design of new plants and simulation of existing plants where conventional chemicals and material mixtures with measurable compositions are used. In addition, to aid in comprehension, solutions to examples of real problems are included. The final section covers plant design and simulation of processes using nonconventional components. This important resource: Includes information on the application of both the Aspen Plus and Aspen Hysys software that enables a comparison of the two software systems Combines the basic theoretical principles of chemical process and design with real-world examples Covers both processes with conventional organic chemicals and processes with more complex materials such as solids, oil blends, polymers and electrolytes Presents examples that are solved using a new version of Aspen software, ASPEN One 9 Written for students and academics in the field of process design, Chemical Process Design and Simulation is a practical and accessible guide to the chemical process design and simulation using proven software.
Download or read book Vapor Liquid Equilibria Using Unifac written by Aage Fredenslund and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-Liquid Equilibria Using UNIFAC: A Group-Contribution Method focuses on the UNIFAC group-contribution method used in predicting quantitative information on the phase equilibria during separation by estimating activity coefficients. Drawing on tested vapor-liquid equilibrium data on which UNIFAC is based, it demonstrates through examples how the method may be used in practical engineering design calculations. Divided into nine chapters, this volume begins with a discussion of vapor and liquid phase nonidealities and how they are calculated in terms of fugacity and activity coefficients, respectively. It then introduces the reader to the UNIFAC method and how it works, the procedure used in establishing the parameters needed for the model, prediction of binary and multicomponent vapor-liquid equilibria for a large number of systems, the potential of UNIFAC for predicting liquid-liquid equilibria, and how UNIFAC can be used to solve practical distillation design problems. This book will benefit process design engineers who want to reliably predict phase equilibria for designing distillation columns and other separation processes.
Download or read book Compositional Grading in Oil and Gas Reservoirs written by Rogerio Oliveira Esposito and published by Gulf Professional Publishing. This book was released on 2017-05-26 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compositional Grading in Oil and Gas Reservoirs offers instruction, examples, and case studies on how to answer the challenges of modeling a compositional gradient subject. Starting with the basics on PVT analysis, applied thermodynamics, and full derivations of irreversible thermodynamic-based equations, this critical reference explains gravity-modified equations to be applied to reservoirs, enabling engineers to obtain fluid composition at any point of the reservoir from measured data to create a stronger model calibration. Once model-parameters are re-estimated, new sensibility can be acquired for more accurate modeling of composition, aiding engineers with stronger production curves, reserve estimations, and design of future development strategies. Multiple examples and case studies are included to show the application of the theory from very simple to more complex systems, such as actual reservoirs influenced by thermal diffusion and gravity simultaneously. Other example include a layer for which asphaltene precipitation takes place in the reservoir and three –phase flash algorithms for liquid-liquid-vapor equilibrium calculations, detailing the techniques necessary to ensure convergence. The book combines practical studies with the importance in modeling more complex phenomena, filling a gap for current and upcoming reservoir engineers to expand on solutions and make sense of their reservoir's output results. - Presents a deeper level of detail on the heterogeneity composition and thermo-physical properties of petroleum fluids in the reservoir - Includes tactics on how to Increase reliability of reservoir simulation initialization, with practice examples at the end of each chapter - Helps readers make sense of compositional grading, with coverage on both theory and application that fulfill a gap in research on reservoir simulation
Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.
Download or read book Handbook of Surface and Colloid Chemistry written by K. S. Birdi and published by CRC Press. This book was released on 2015-06-25 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the Handbook of Surface and Colloid Chemistry informs you of significant recent developments in the field. It highlights new applications and provides revised insight on surface and colloid chemistry's growing role in industrial innovations. The contributors to each chapter are internationally recognized experts. Several chapter
Download or read book Computer Aided Molecular Design written by Luke Achenie and published by Elsevier. This book was released on 2002-11-20 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAMD or Computer Aided Molecular Design refers to the design of molecules with desirable properties. That is, through CAMD, one determines molecules that match a specified set of (target) properties. CAMD as a technique has a very large potential as in principle, all kinds of chemical, bio-chemical and material products can be designed through this technique.This book mainly deals with macroscopic properties and therefore does not cover molecular design of large, complex chemicals such as drugs. While books have been written on computer aided molecular design relating to drugs and large complex chemicals, a book on systematic formulation of CAMD problems and solutions, with emphasis on theory and practice, which helps one to learn, understand and apply the technique is currently unavailable.·This title brings together the theoretical aspects related to Computer Aided Molecular Design, the different techniques that have been developed and the different applications that have been reported. ·Contributing authors are among the leading researchers and users of CAMD·First book available giving a systematic formulation of CAMD problems and solutions
Download or read book Supercritical Fluids written by E. Kiran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are neither gas nor liquid, but can be compressed gradually from low to high density and they are therefore interesting and important as tunable solvents and reaction media in the chemical process industry. By adjusting the density the properties of these fluids can be customised and manipulated for a given process - physical or chemical transformation. Separation and processing using supercritical solvents such as CO2 are currently on-line commercially in the food, essential oils and polymer industries. Many agencies and industries are considering the use of supercritical water for waste remediation. Supercritical fluid chromatography represents another, major analytical application. Significant advances have recently been made in materials processing, ranging from particle formation to the creation of porous materials. The chapters in this book provide tutorial accounts of topical areas centred around: (1) phase equilibria, thermodynamics and equations of state; (2) critical behaviour, crossover effects; (3) transport and interfacial properties; (4) molecular modelling, computer simulation; (5) reactions, spectroscopy; (6) phase separation kinetics; (7) extractions; (8) applications to polymers, pharmaceuticals, natural materials and chromatography; (9) process scale-up.
Download or read book Nucleation Theory written by V.I. Kalikmanov and published by Springer. This book was released on 2012-11-28 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most striking phenomena in condensed matter physics is the occurrence of abrupt transitions in the structure of a substance at certain temperatures or pressures. These are first order phase transitions, and examples such as the freezing of water are familiar in everyday life. The conditions at which the transformation takes place can sometimes vary. For example, the freezing point of water is not always 0°C, but the liquid can be supercooled considerably if it is pure enough and treated carefully. The reason for this phenomenon is nucleation. This monograph covers all major available routes of theoretical research of nucleation phenomena (phenomenological models, semi-phenomenological theories, density functional theories, microscopic and semi-microscopic approaches), with emphasis on the formation of liquid droplets from a metastable vapor. Also, it illustrates the application of these various approaches to experimentally relevant problems. In spite of the familiarity of the involved phenomena, it is still impossible to calculate nucleation accurately, as the properties and the kinetics of the daughter phase are insufficiently well known. Existing theories based upon classical nucleation theory have on the whole explained the trends in behavior correctly. However they often fail spectacularly to account for new data, in particular in the case of binary or, more generally, multi-component nucleation. The current challenge of this book is to go beyond such classical models and provide a more satisfactory theory by using density functional theory and microscopic computer simulations in order to describe the properties of small clusters. Also, semi-phenomenological models are proposed, which attempt to relate the properties of small clusters to known properties of the bulk phases. This monograph is an introduction as well as a compendium to researchers in soft condensed matter physics and chemical physics, graduate and post-graduate students in physics and chemistry starting on research in the area of nucleation, and to experimentalists wishing to gain a better understanding of the efforts being made to account for their data.
Download or read book Applied Thermodynamics of Fluids written by A. R. H. Goodwin and published by Royal Society of Chemistry. This book was released on 2010 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published under the asspices of both IUPAC and its affiliated body, the International Association of Chemical Thermodynamics (IACT), this book will serve as a guide to scientists or technicians who use equations of state for fluids. Concentrating on the application of theory, the practical use of each type of equation is discussed and the strengths and weaknesses of each are addressed. It includes material on the equations of state for chemically reacting and non-equilibrium fluids which have undergone significant developments and brings up to date the equations of state for fluids and fluid mixtures. Applied Thermodynamics of Fluids addresses the need of practitioners within academia, government and industry by assembling an international team of distinguished experts to provide each chapter. The topics presented in the book are important to the energy business, particularly the hydroncarbon economy and the development of new power sources and are also significant for the application of liquid crystals and ionic liquids to commericial products. This reference will be useful for post graduate researchers in the fields of chemical engineering, mechanical engineering, chemistry and physics.
Download or read book COSMO RS written by Andreas Klamt and published by Elsevier. This book was released on 2005-07-26 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The COSMO-RS technique is a novel method for predicting the thermodynamic properties of pure and mixed fluids which are important in many areas, ranging from chemical engineering to drug design. COSMO-RS, From Quantum Chemistry to Fluid Phase Thermodynamics and Drug Design is about this novel technology, which has recently proven to be the most reliable and efficient tool for the prediction of vapour-liquid equilibria. In contrast to group contribution methods, which depend on an extremely large number of experimental data, COSMO-RS calculates the thermodynamic data from molecular surface polarity distributions, resulting from quantum chemical calculations of the individual compounds in the mixture. In this book, the author cleverly combines a vivid overview of the partly demanding theoretical steps with a deeper analysis of their scientific background and justification. Aimed at theoretical chemists, computational chemists, physical chemists, chemical engineers, thermodynamicists as well as students,academic and industrial experts, COSMO-RS, From Quantum Chemistry to Fluid Phase Thermodynamics and Drug Design provides a novel viewpoint to anyone looking to gain more insight into the theory and potential of the unique method, COSMO-RS. - The only book currently available on COSMO-RS technique - Provides a novel viewpoint for the scientific understanding and for the practical quantitative treatment of fluid phase thermodynamics - Includes illustrative examples of the COSMOtherm program
Download or read book Gas Extraction written by Gerd Brunner and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of compressed gases as solvents has found widespread interest within the scientific community. Its processes have industrial applications. Gas Extraction deals with the possibilities of supercritical gases as solvents for separation processes. The volume combines physico-chemical aspects with chemical engineering methods. The text generalizes as far as possible, and treats examples in detail. Gas Extraction covers, for the first time, the subject in textbook form. Most of the examples provide new results that will be helpful for practicing scientists, engineers, and students who want to make use of the techniques.
