Download or read book Mixing in Inland and Coastal Waters written by Hugo B. Fischer and published by Elsevier. This book was released on 2013-10-22 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outgrowth of research contributions and teaching experiences by all the authors in applying modern fluid mechanics to problems of pollutant transport and mixing in the water environment. It should be suitable for use in first year graduate level courses for engineering and science students, although more material is contained than can reasonably be taught in a one-year course, and most instructors will probably wish to cover only selected potions. The book should also be useful as a reference for practicing hydraulic and environmental engineers, as well as anyone involved in engineering studies for disposal of wastes into the environment. The practicing consulting or design engineer will find a thorough explanation of the fundamental processes, as well as many references to the current technical literature, the student should gain a deep enough understanding of basics to be able to read with understanding the future technical literature evolving in this evolving field.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1987 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Buoyant Jets and Plumes written by Wolfgang Rodi and published by Elsevier. This book was released on 2014-05-09 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science & Applications of Heat and Mass Transfer: Reports, Reviews, & Computer Programs, Volume 6: Turbulent Buoyant Jets and Plumes focuses on the formation, properties, characteristics, and reactions of turbulent jets and plumes. The selection first offers information on the mechanics of turbulent buoyant jets and plumes and turbulent buoyant jets in shallow fluid layers. Discussions focus on submerged buoyant jets into shallow fluid, horizontal surface or interface jets into shallow layers, fundamental considerations, and turbulent buoyant jets (forced plumes). The manuscript then examines a turbulence model for buoyant flows and its application to vertical buoyant jets, including mathematical model, calculation of vertical buoyant jets, and explanation of velocity and temperature spreading in pure jets and pure plumes. The publication is a dependable reference for scientists and readers interested in turbulent buoyant jets and plumes.
Download or read book WADC Technical Report written by United States. Wright Air Development Division and published by . This book was released on 1956 with total page 1746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Fire and Combustion Systems 1993 written by Bakhtier Farouk and published by . This book was released on 1993 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Engineering Review written by and published by . This book was released on 1957 with total page 1908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals and Technology of Combustion written by F El-Mahallawy and published by Elsevier. This book was released on 2002-07-10 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Technology of Combustion contains brief descriptions of combustion fundamental processes, followed by an extensive survey of the combustion research technology. It also includes mathematical combustion modeling of the processes covering mainly premixed and diffusion flames, where many chemical and physical processes compete in complex ways, for both laminar and turbulent flows. The combustion chemistry models that validate experimental data for different fuels are sufficiently accurate to allow confident predictions of the flame characteristics. This illustrates a unique bridge between combustion fundamentals and combustion technology, which provides a valuable technical reference for many engineers and scientists. Moreover, the book gives the reader sufficient background of basic engineering sciences such as chemistry, thermodynamics, heat transfer and fluid mechanics. The combustion research and mathematical models fit between small-scale laboratory burner flames, and large-scale industrial boilers, furnaces and combustion chambers. The materials have been collected from previous relevant research and some selected papers of the authors and co-workers, which have been presented mainly in different refereed journals, international conferences and symposia, thus providing a comprehensive collection. Furthermore, the book includes some of the many recent general correlations for the characteristics of laminar, turbulent, premixed and diffusion flames in an easily usable form. The authors believe that further progress in optimizing combustion performance and reducing polluting emissions can only be treated through understanding of combustion chemistry.
Download or read book Combustion written by Irvin Glassman and published by Academic Press. This book was released on 2014-12-02 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout its previous four editions, Combustion has made a very complex subject both enjoyable and understandable to its student readers and a pleasure for instructors to teach. With its clearly articulated physical and chemical processes of flame combustion and smooth, logical transitions to engineering applications, this new edition continues that tradition. Greatly expanded end-of-chapter problem sets and new areas of combustion engineering applications make it even easier for students to grasp the significance of combustion to a wide range of engineering practice, from transportation to energy generation to environmental impacts. Combustion engineering is the study of rapid energy and mass transfer usually through the common physical phenomena of flame oxidation. It covers the physics and chemistry of this process and the engineering applications—including power generation in internal combustion automobile engines and gas turbine engines. Renewed concerns about energy efficiency and fuel costs, along with continued concerns over toxic and particulate emissions, make this a crucial area of engineering. - New chapter on new combustion concepts and technologies, including discussion on nanotechnology as related to combustion, as well as microgravity combustion, microcombustion, and catalytic combustion—all interrelated and discussed by considering scaling issues (e.g., length and time scales) - New information on sensitivity analysis of reaction mechanisms and generation and application of reduced mechanisms - Expanded coverage of turbulent reactive flows to better illustrate real-world applications - Important new sections on stabilization of diffusion flames—for the first time, the concept of triple flames will be introduced and discussed in the context of diffusion flame stabilization
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Butterworth-Heinemann. This book was released on 2012-11-05 with total page 3685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in the process industries is critical for those who work with chemicals and hazardous substances or processes. The field of loss prevention is, and continues to be, of supreme importance to countless companies, municipalities and governments around the world, and Lees' is a detailed reference to defending against hazards. Recognized as the standard work for chemical and process engineering safety professionals, it provides the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing three volume reference instead. - The process safety encyclopedia, trusted worldwide for over 30 years - Now available in print and online, to aid searchability and portability - Over 3,600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned in one resource as opposed to multiple sources
Download or read book Energy Research Abstracts written by and published by . This book was released on 1978 with total page 1510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ninth Symposium International on Combustion written by Sam Stuart and published by Elsevier. This book was released on 2013-09-11 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ninth Symposium (International) on Combustion covers the proceedings of the Ninth Symposium (International) on Combustion, held at Cornell University in Ithaca, New York on August 27 to September 1, 1962, under the auspices of the Combustion Institute. The book focuses on the processes and reactions involved in combustion. The selection first offers information on flame strength of propane-oxygen flames at low pressures in turbulent flow and mixing and flow in ducted turbulent jets. Topics include radial profile of the jetting velocity, radial growth of the jet, and mixing zones of a ducted jet. The text then elaborates on turbulent flame studies in two-dimensional open burners; turbulent mass transfer and rates of combustion in confined turbulent flames; and flame stabilization in a boundary layer. The publication examines the theoretical study of properties of laminar steady state flames as a function of properties of their chemical components and spectra of alkali metal-organic halide flames. The text then takes a look at the thermal radiation theory for plane flame propagation in coal dust clouds; flame characteristics of the diborane-hydrazine system; and studies of the combustion of dimethyl hydrazine and related compounds. The selection is a dependable reference for readers interested in the processes and reactions involved in combustion.
Download or read book Microgravity Combustion written by Howard D. Ross and published by Elsevier. This book was released on 2001-09-03 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to understanding combustion, the burning of a substance that produces heat and often light, in microgravity environments-i.e., environments with very low gravity such as outer space. Readers are presented with a compilation of worldwide findings from fifteen years of research and experimental tests in various low-gravity environments, including drop towers, aircraft, and space.Microgravity Combustion is unique in that no other book reviews low- gravity combustion research in such a comprehensive manner. It provides an excellent introduction for those researching in the fields of combustion, aerospace, and fluid and thermal sciences.* An introduction to the progress made in understanding combustion in a microgravity environment* Experimental, theoretical and computational findings of current combustion research* Tutorial concepts, such as scaling analysis* Worldwide microgravity research findings
Download or read book Advances in Energy Science and Equipment Engineering written by Shiquan Zhou and published by CRC Press. This book was released on 2015-11-05 with total page 2914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Energy Equipment Science and Engineering contains selected papers from the 2015 International Conference on Energy Equipment Science and Engineering (ICEESE 2015, Guangzhou, China, 30-31 May 2015). The topics covered include:- Advanced design technology- Energy and chemical engineering- Energy and environmental engineering- Energy scien
