Download or read book Microstructure and Properties of Materials written by J C M Li and published by World Scientific Publishing Company. This book was released on 2000-10-09 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials. There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials. Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.
Download or read book Random Heterogeneous Materials written by Salvatore Torquato and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text presents a unified approach of treating the microstructure and effective properties of heterogeneous media. Part I deals with the quantitative characterization of the microstructure of heterogeneous via theoretical methods; Part II treats a wide variety of effective properties of heterogeneous materials and how they are linked to the microstructure, accomplished by using rigorous methods.
Download or read book Steels written by Robert William Kerr Honeycombe and published by John Wiley & Sons. This book was released on 1996-02-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The properties of steels depend critically on their microstructure. By examining the mechanical properties of steels in conjunction with microstructure, the first edition gave a clear description of the development and behavior of these materials - the very foundation of their widespread use. This new edition more explicitly links this theory with applications while retaining the style and purpose of its predecessor.
Download or read book Microstructure and Wear of Materials written by K.-H. Zum Gahr and published by Elsevier. This book was released on 1987-03-01 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book will be useful not only to practising engineers and scientists, but also to advanced students interested in wear. It reviews our current understanding of the influence of microstructural elements and physical properties of materials (metals, polymers, ceramics and composites) on wear. The introductory chapters describe the relation between microstructure and mechanical properties of materials, surfaces in contact and the classification of wear processes. The following chapters are concerned with wear modes of great practical interest such as grooving wear, sliding wear, rolling-sliding wear and erosive wear. Our present understanding of abrasion, adhesion, surface fatigue and tribochemical reactions as the relevant wear mechanisms is discussed, and new wear models are presented. In addition to extensive experimental results, sketches have been widely used for clarifying the physical events.
Download or read book Concrete Microstructure Properties and Materials written by P. Mehta and published by McGraw Hill Professional. This book was released on 2005-09-26 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the art and science of concrete in a simple, clear, hands-on manner, focusing on the following: Cement and concrete are predicted to be the premier building material of the 21st Century; Includes unique diagrams, photographs, and summary tables; Updated to include new chapters on non-destructive methods for concrete; future challenges in concrete technology; an increased number of examples of concrete applications; and new developments in durability.
Download or read book Microstructure Property and Processing of Functional Ceramics written by Qingrui Yin and published by Springer Science & Business Media. This book was released on 2010-06-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure, Property and Processing of Functional Ceramics describes the preparation, property and local structure microscopy of functional ceramics. It covers functional ceramic fabrication processing, grain boundary phenomena and micro-, nanoscale structures characterizations including scanning electron acoustic microscopy, scanning probe acoustic microscopy and piezoresponse force microscopy. This book is intended for advanced undergraduates, graduates and researchers in the field of materials science, microelectronics, optoelectronics and microscopy. Qingrui Yin and Binghe Zhu both are professors at the Shanghai Institute of Ceramics, Chinese Academy of Sciences; Dr. Huarong Zeng is an associate professor at the Shanghai Institute of Ceramics, Chinese Academy of Sciences.
Download or read book Fundamentals of Materials Science written by Eric J. Mittemeijer and published by Springer. This book was released on 2014-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a strong introduction to fundamental concepts on the basis of materials science. It conveys the central issue of materials science, distinguishing it from merely solid state physics and solid state chemistry, namely to develop models that provide the relation between the microstructure and the properties. The book is meant to be used in the beginning of a materials science and engineering study as well as throughout an entire undergraduate and even graduate study as a solid background against which specialized texts can be studied. Topics dealt with are "crystallography", "lattice defects", "microstructural analysis", "phase equilibria and transformations" and "mechanical strength". After the basic chapters the coverage of topics occurs to an extent surpassing what can be offered in a freshman's course. About the author Prof. Mittemeijer is one of the top scientists in materials science, whose perceptiveness and insight have led to important achievements. This book witnesses of his knowledge and panoramic overview and profound understanding of the field. He is a director of the Max Planck Institute for Metals Research in Stuttgart.
Download or read book Statistical Analysis of Microstructures in Materials Science written by Joachim Ohser and published by John Wiley & Sons. This book was released on 2000-12-19 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of the origin and formation of microstructures and the effect that microstructure has on the properties of materials are important issues in materials science and technology. Geometrical analysis is often the key to understanding the formation of microstructures and the resulting material properties. The authors make use of mathematical morphology, spatial statistics, image processing, stereology and stochastic geometry to analyze microstructures arising in materials science. * Quantitative microstructure analysis is one of the most successful experimental techniques in materials science * Uses examples to demonstrate the techniques * Program code included enables the reader to apply the numerous algorithms * Accessible to material scientists with limited statistical knowledge Primarily aimed at applied materials scientists, the book will also appeal to those working and researching in earth sciences, material technology, mineralogy, petrography, image analysis, cytology and biology.
Download or read book Microstructure and Properties of Micro and Nanoscale Materials Films and Coatings NAP 2019 written by Alexander D. Pogrebnjak and published by Springer Nature. This book was released on 2020-01-28 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of experimental and theoretical (including first-principles molecular dynamics simulation) studies of nanostructured and nanocomposite metal-based materials, and nanoscale multilayer coatings fabricated by physical or chemical vapor deposition, magnetron sputtering, electrospark alloying, ionic layer absorption, contact melting, and high-current electron beam irradiation. It also discusses novel methods of nanocomposite formation, as well as the structure of the deposited films, coatings and other nanoscale materials, their elemental and phase composition, and their physical–mechanical, tribological, magnetic and electrical properties. Lastly, it explores the influence of a various surface modification methods, such as thermal annealing, pulsed laser modification, and thermomechanical and ultrasonic treatment, as well as different properties of nanostructured films.
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties. One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying. With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Microstructure and Texture in Steels written by Arunansu Haldar and published by Springer Science & Business Media. This book was released on 2009-09-03 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure and Texture in Steels and Other Materials comprises a collection of articles pertaining to experimental and theoretical aspects of the evolution of crystallographic texture and microstructure during processing of steels and some other materials. Among the topics covered is the processing-microstructure-texture-property relationship in various kinds of steels, including the latest grade. Special emphasis has been given to introduce recent advances in the characterization of texture and microstructure, as well as modeling. The papers included are written by well-known experts from academia and industrial R and D, which will provide the reader with state-of-the-art, in-depth knowledge of the subject. With these attributes, Microstructure and Texture in Steels and Other Materials is expected to serve the cause of creating awareness of current developments in microstructural science and materials engineering among academic and R and D personnel working in the field.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Fundamentals of Materials Science written by Eric J. Mittemeijer and published by Springer Nature. This book was released on 2022-01-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a strong introduction to the fundamental concepts of materials science. It conveys the quintessence of this interdisciplinary field, distinguishing it from merely solid-state physics and solid-state chemistry, using metals as model systems to elucidate the relation between microstructure and materials properties. Mittemeijer's Fundamentals of Materials Science provides a consistent treatment of the subject matter with a special focus on the microstructure-property relationship. Richly illustrated and thoroughly referenced, it is the ideal adoption for an entire undergraduate, and even graduate, course of study in materials science and engineering. It delivers a solid background against which more specialized texts can be studied, covering the necessary breadth of key topics such as crystallography, structure defects, phase equilibria and transformations, diffusion and kinetics, and mechanical properties. The success of the first edition has led to this updated and extended second edition, featuring detailed discussion of electron microscopy, supermicroscopy and diffraction methods, an extended treatment of diffusion in solids, and a separate chapter on phase transformation kinetics. “In a lucid and masterly manner, the ways in which the microstructure can affect a host of basic phenomena in metals are described.... By consistently staying with the postulated topic of the microstructure - property relationship, this book occupies a singular position within the broad spectrum of comparable materials science literature .... it will also be of permanent value as a reference book for background refreshing, not least because of its unique annotated intermezzi; an ambitious, remarkable work.” G. Petzow in International Journal of Materials Research. “The biggest strength of the book is the discussion of the structure-property relationships, which the author has accomplished admirably.... In a nutshell, the book should not be looked at as a quick ‘cook book’ type text, but as a serious, critical treatise for some significant time to come.” G.S. Upadhyaya in Science of Sintering. “The role of lattice defects in deformation processes is clearly illustrated using excellent diagrams . Included are many footnotes, ‘Intermezzos’, ‘Epilogues’ and asides within the text from the author’s experience. This ..... soon becomes valued for the interesting insights into the subject and shows the human side of its history. Overall this book provides a refreshing treatment of this important subject and should prove a useful addition to the existing text books available to undergraduate and graduate students and researchers in the field of materials science.” M. Davies in Materials World.
Download or read book Diffraction Analysis of the Microstructure of Materials written by Eric J. Mittemeijer and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of diffraction methods applied to the analysis of the microstructure of materials. Since crystallite size and the presence of lattice defects have a decisive influence on the properties of many engineering materials, information about this microstructure is of vital importance in developing and assessing materials for practical applications. The most powerful and usually non-destructive evaluation techniques available are X-ray and neutron diffraction. The book details, among other things, diffraction-line broadening methods for determining crystallite size and atomic-scale strain due, e.g. to dislocations, and methods for the analysis of residual (macroscale) stress. The book assumes only a basic knowledge of solid-state physics and supplies readers sufficient information to apply the methods themselves.
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
