Download or read book Handbook on Pressurized Irrigation Techniques written by Andreas Phocaides and published by Food & Agriculture Org.. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing the efficiency of water use and enhancing agricultural water productivity at all levels of the production chains are becoming priorities in a growing number of countries. In particular, shifting to modern on-farm irrigation practices can contribute to a substantial increase in both water use efficiency and water productivity. The objective of this handbook is to provide a practical guide on the use of pressurized irrigation techniques to farmers, irrigation technicians, and extension workers in the field. In this second edition, the handbook has been considerably revised, including new chapters on low-cost drip irrigation and pipe distribution systems for smallholders.--Publisher's description.
Download or read book Handbook of PVC Pipe Design and Construction written by Uni-Bell PVC Pipe Association and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.
Download or read book Building Adaptation written by James Douglas and published by Routledge. This book was released on 2006-08-11 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: As existing buildings age, nearly half of all construction activity in Britain is related to maintenance, refurbishment and conversions. Building adaptation is an activity that continues to make a significant contribution to the workload of the construction industry. Given its importance to sustainable construction, the proportion of adaptation works in relation to new build is likely to remain substantial for the foreseeable future, especially in the developed parts of the world. Building Adaptation, Second Edition is intended as a primer on the physical changes that can affect older properties. It demonstrates the general principles, techniques, and processes needed when existing buildings must undergo alteration, conversion, extension, improvement, or refurbishment. The publication of the first edition of Building Adaptation reflected the upsurge in refurbishment work. The book quickly established itself as one of the core texts for building surveying students and others on undergraduate and postgraduate built environment courses. This new edition continues to provide a comprehensive introduction to all the key issues relating to the adaptation of buildings. It deals with any work to a building over and above maintenance to change its capacity, function or performance.
Download or read book Plastic Piping Systems written by David A. Chasis and published by Industrial Press Inc.. This book was released on 1988 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: For grades 10-12.
Download or read book Construction Materials written by Manuel Bustillo Revuelta and published by Springer Nature. This book was released on 2021-03-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Materials is a comprehensive textbook covering all raw materials and products related to the construction processes, and not only those applied to building structures. The book is organized to help readers achieve competent knowledge about construction materials. At the beginning of the book the author offers the general concepts, definitions, and standards adopted worldwide for these materials to be used along the book. The central part of the text covers the primary construction materials required to manufacture concrete and mortars, the most relevant construction materials in the last century. Expressly, concrete and mortar are treated in detail in dedicated chapters per component. In addition, the author addresses other relevant materials in construction such as ceramic materials, metals and alloys, bituminous materials, and geosynthetic materials. Finally, since the construction industry is one of the largest single waste producing sector in the world, the last chapter outlines the main types and characteristics of construction and demolition waste (e.g. recycled aggregates). The book appeals to students but also professionals interested in construction materials and construction and civil engineering.
Download or read book An Assessment of Ozone and Chlorine Dioxide Technologies for Treatment of Municipal Water Supplies written by G. Wade Miller and published by . This book was released on 1978 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Dictionary of Construction Surveying and Civil Engineering written by Christopher Gorse and published by OUP Oxford. This book was released on 2012-02-23 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This A to Z is the most up-to-date dictionary of building, surveying, and civil engineering terms and definitions available. Written by an experienced team of experts in the respective fields, it covers in over 7,500 entries the key areas of construction technology and practice, civil and construction engineering, construction management techniques and processes, and legal aspects such as contracts and procurement. Illustrations complement entries where necessary and other extra features include entry-level web links, which are listed and regularly updated on a companion website. Its wide coverage makes it the ideal reference for students of construction and related areas, as well as for professionals in the field.
Download or read book Irrigation Manual written by Andreas Savva and published by Food & Agriculture Org. This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual (most of whose modules were originally published 2001-2002) aims at strengthening various aspects of irrigation development, mainly emphasizing the engineering, agronomic and economic aspects of smallholder irrigation, in view of the limited practical references available in this area. It also introduces the irrigation practitioner to the social, health and environmental aspects, providing a bridge between the various disciplines involved in irrigation development.--Publisher's description.
Download or read book Architectural utilities written by George Salinda Salvan and published by Goodwill Trading Co., Inc.. This book was released on 2005 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Septage Management written by Joseph W. Rezek and published by . This book was released on 1980 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Grouting written by United States. Army. Corps of Engineers and published by Amer Society of Civil Engineers. This book was released on 1997 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: U.S. Army Corps of Engineers Technical Engineering and Design Guide No. 24 provides information and guidance for the use of chemical grouting in connection with construction projects.
Download or read book Building Services Engineering written by David Chadderton and published by Routledge. This book was released on 2004-08-02 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly up-dated fourth edition of David Chadderton's text provides study materials in the fields of construction, architectural, surveying and energy engineering.
Download or read book Water Supply Systems written by Cedo Maksimovic and published by Springer. This book was released on 2011-11-06 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology now affects almost every aspect of Water Supply Management, Operation, Planning and Design; the speed of development means that assessing what is "new" is sometimes difficult. Old ideas can now be applied because of new technology; technology is now revealing problems that were unnoticed 10 years ago. Some emerging technologies promise much but are still underdeveloped for use in real world conditions, while we should always remember that "new" technology depends upon the state of development in respective countries, a point which is particularly relevant to the NATO Advanced Study Institute, for which this book has been produced. Thus our objective in producing the book has been to highlight, in a wide range of technical areas, where and how technology is being applied, what is "new" and what the limitations of these technologies are in the real world. We have also tried to provide an European and American perspective where possible to illustrate how problems are tackled in different cultural environments. It is probably true that "technology" is also somewhat dependent upon the political, economic and organisational climate in different countries and we have included a chapter covering these aspects.
Download or read book Solids in Sewers written by Richard M. Ashley and published by IWA Publishing. This book was released on 2004-04-30 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Report presents information on the current state of knowledge of the origins, occurrence, nature and effects of sewer solids for use by engineers, scientists, administrators and water quality planners for the planning, design and operation of sewerage systems. The report addresses both sewer maintenance requirements and environmental protection issues. Increasing environmental standards, coupled with public expectations, have led to stringent water quality standards. In response to this, it has been necessary to develop new methodologies and computer based analytical techniques to model and understand the performance of all aspects of waste water systems. Fundamental to these techniques is the understanding of the way in which sewer solids contribute to the poor performance of wastewater systems and consequential environmental damage. The information presented in this Report about the origins, nature, movement, hydraulic and polluting effects of solids in sewers has enabled strategies and rules to be developed for the management of sewerage systems to minimise the deleterious effects of these solids and associated pollutants. Scientific & Technical Report No. 14
Download or read book Physical Aging in Amorphous Polymers and Other Materials written by L. C. E. Struik and published by Elsevier Science Limited. This book was released on 1978 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Polymer Processing written by Tim A. Osswald and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2024-11-11 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the background needed to understand not only the wide field of polymer processing, but also the emerging technologies associated with the plastics industry in the 21st century. It combines practical engineering concepts with modeling of realistic polymer processes. Divided into three sections, it provides the reader with a solid knowledge base in polymer materials, polymer processing, and modeling. "Understanding Polymer Processing" is intended for the person who is entering the plastics manufacturing industry and as a textbook for students taking an introductory course in polymer processing. It also serves as a guide to the practicing engineer when choosing a process, determining important parameters and factors during the early stages of process design, and when optimizing such a process. Practical examples illustrating basic concepts are presented throughout the book. New in the third edition are chapters on data-driven modeling and physics-driven modeling, as well as new sections on manufacturing and dimensional analysis. In addition to a number of other smaller improvements and corrections throughout the book, bonus code downloads are also provided. Contents: Part I: Polymeric Materials This section gives a general introduction to polymers, including mechanical behavior of polymers and melt rheology. Part II: Polymer Processing The major polymer processes are introduced in this section, including extrusion, mixing, injection molding, thermoforming, blow molding, film blowing, and many others. Part III: Modeling This last section delivers the tools to allow the engineer to solve back-of-the-envelope polymer processing models. It includes dimensional analysis and scaling, transport phenomena in polymer processing, and modeling polymer processes.
Download or read book Architectural Character the History of Architecture written by George Salinda Salvan and published by . This book was released on 1986 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt:
