Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.

Download or read book Metallography Principles and Practice written by George F. Vander Voort and published by ASM International. This book was released on 1999-01-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers a comprehensive source of information on metallographic techniques and their application to the study of metals, ceramics, and polymers. It contains an extensive collection of micro- and macrographs.

Download or read book Metallographer s Guide written by B. L. Bramfitt and published by ASM International. This book was released on 2001-01-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.

Download or read book Metallography past Present and Future written by George F. Vander Voort and published by ASTM International. This book was released on 1993 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.

Download or read book Principles of Metallography written by Robert Seaton Williams and published by . This book was released on 1920 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallography written by Abrams H. and published by ASTM International. This book was released on 1986 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallography in Archaeology and Art written by David A. Scott and published by Springer Nature. This book was released on 2019-08-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the metallographic study of ancient metals. Metallography is important both conceptually as a microstructural science and in terms of its application to the study of ancient and historic metals. Metallography is a well-established methodology for the characterization of the microstructure of metals, which continues to be significant today in quality control and characterization of metallic properties. Not only does the metallographic examination of ancient metals present its own challenges in terms of sample size and interpretation of evidence, but it must be integrated with archaeological data and cultural research in order to obtain the most meaningful results. Issues of authentication and the establishment of fakes and forgeries of metallic artefacts often involve metallographic evidence of both metal and patina or corrosion interface, as an essential component of such a study. The present volume sets out the basic features of relevant metallic systems, enhanced with a series of examples of typical microstructural types, with illustrative case studies and examples throughout the text derived from studies undertaken by the two authors. This book provides a comprehensive presentation of metallography for archaeologists, archaeometallurgists, conservators, conservation scientists and metallurgists of modern materials.

Download or read book Metallography A Practical Tool for Correlating the Structure and Properties of Materials written by and published by ASTM International. This book was released on 1974 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Metallography written by Georgee F. Vander and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book should be of interest to practising engineers in metallurgy and materials science, mechanical engineers, chemical engineers involved with corrosion and inorganic chemistry, industry engineers in the steel and metal alloy business.

Download or read book Metallography as a Quality Control Tool written by Mccall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Qual ity control has been described as a system for verifying and maintaining a desired level of quality in a product or process by careful planning, continued inspec tion, and corrective action where required. With many of today's products, there is an ever increasing demand for improved reliability during service. This in turn ne cessitates the use of a wide range of control techniques - some very sophisticated and complex - not only to verify the quality of the final product but also to moni tor that the fabrication processes are under control. Furthermore, with certain in dustries, quality control of the final product is of paramount importance because of the needs for its reliable and safe operation under arduous and sometimes dangerous conditions. Metallography often serves as an invaluable quality control tool and can provide information not normally attainable by more conventional procedures. It often supplements both destructive techniques, e. g. , mechanical testing, as well as non-destructive procedures, e. g. , as radiography, ultrasonic testing, and dye-penetrant inspection. Furthermore, metallographic inspection utilizes a wide range of tech niques ranging from conventional optical microscopy to more sophisticated procedures such as scanning electron microscopy, X-ray spectroscopy, and Auger electron spec troscopy. In some industries, metallography also is employed during maintenance, field inspection, and overhaul of components.

Download or read book Symposium on Electron Metallography written by and published by ASTM International. This book was released on 1960 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Modern Metallographic Techniques written by American Society for Metals and published by ASTM International. This book was released on 1970 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manual on Electron Metallography Techniques written by ASTM AUTOR and published by ASTM International. This book was released on 1973 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Symposium on Techiques for Electron Metallography written by and published by ASTM International. This book was released on with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallography in Failure Analysis written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed analyses of failures of material components have proved to be valuable in many ways; by preventing further failures, by assessing the validity of designs and the selection of materials, by uncovering shortcomings in the processing of the materials in volved through characterizations of defects, and by revealing problems introduced during the manufacture or fabrication of the component. Increased recognition of the value of performing failure analyses has caused the field to develop into a very active area of tech nical endeavor. Failure analysis has been employed in numerous different technical dis ciplines and has proven beneficial. The increased activity has caused many new and im proved methods for performing these analyses to be developed. Among these are many methods which can be characterized as generally belonging to the field of metallography. In recognition of the important role that metallography plays in the performance of failure analyses, the absence of a text that specifically discusses this subject, and the be lief that communication of information on the subject would be of technical interest, The American Society for Metals and The International Metallographic Society co sponsored a symposium. The intent was to bring together world-recognized authorities working in various aspects of the failure analysis and metallographic fields to share meth ods they use, results they have obtained, and the purposes to which they utilized these results. The symposium, entitled "Metallography in Failure Analysis", was held in Hous ton, Texas, USA, July 17-18, 1977.

Download or read book Metallography of Titanium Alloys written by Horace Russell Ogden and published by . This book was released on 1958 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: