Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.

Download or read book Noble Metal Metal Oxide Hybrid Nanoparticles written by Satyabrata Mohapatra and published by Elsevier. This book was released on 2018-10-11 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noble Metal-Metal Oxide Hybrid Nanoparticles: Fundamentals and Applications sets out concepts and emerging applications of hybrid nanoparticles in biomedicine, antibacterial, energy storage and electronics. The hybridization of noble metals (Gold, Silver, Palladium and Platinum) with metal-oxide nanoparticles exhibits superior features when compared to individual nanoparticles. In some cases, metal oxides act as semiconductors, such as nano zinc oxide or titanium oxide nanoparticles, where their hybridization with silver nanoparticles, enhanced significantly their photocatalytic efficiency. The book highlights how such nanomaterials are used for practical applications. - Examines the properties of metal-metal oxide hybrid nanoparticles that make them so adaptable - Explores the mechanisms by which nanoparticles interact with each other, showing how these can be exploited for practical applications - Shows how metal oxide hybrid nanomaterials are used in a range of industry sectors, including energy, the environment and healthcare

Download or read book Synthesis Functionalization and Surface Treatment of Nanoparticles written by Marie-Isabelle Baraton and published by . This book was released on 2003 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Functionalization and Surface Treatment of Nanoparticles is an area of crucial importance in the emerging field of nanotechnology. Controlling the surface chemical composition and mastering its modification at the nanometer scale are critical issues for high-added value applications involving nanoparticles. The basic applications of surface functionalization range from altering the wetting or adhesion characteristics and improving the nanoparticles dispersion in matrices to enhancing the catalytic properties and ordering the interfacial region, and such. The creation of specific surface sites on nanoparticles for selective molecular attachment is considered a promising approach for their applications in nanofabrication, nanopatterning, selfassembly, nanosensors, bioprobes, drug delivery, pigments, photocatalysis, LEDs, etc. This book presents novel and improved synthesis methods and approaches for controlling and functionalizing the nanoparticle surfaces to enhance the overall performance of the nanoparticles for targeted applications.

Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal ]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.

Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. - Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices - Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures - Provides an in-depth overview of novel applications, including chromogenics, electronics and energy

Download or read book Analysis and Risk of Nanomaterials in Environmental and Food Samples written by Damia Barcelo and published by Newnes. This book was released on 2012-10-03 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of nanotechnology in different consumer products has delivered new products with highly desirable properties, but at same time has opened a new window for a wide group of emerging contaminants and a new type of human exposure which needs to be assessed. Most of the current human toxicological information on nanomaterials comes from nano-sized particles in air, and their effects via inhalation. Other routes of human exposure, such as water and food, and the effects on human health and the environment have been less studied. It is the recent research in these areas that is highlighted here in one of the first books covering the analysis and ecotoxicological evaluation of nanomaterials in food and the environment, with both matrices being of considerable interest. In addition to providing a global summary of recent research, this book shows how widely used chromatographic and spectroscopic methods can be added to the analytical arsenal of microscopic techniques that have commonly been used to characterize nanomaterials. Describes the analytical techniques used to characterize nanomaterials and their applications in environmental or food samples Includes analysis and ecotoxicological evaluation of nanomaterials in food and environmental matrices Takes a detailed look at the research on emerging fields of human exposure to nanomaterials and their environmental risks

Download or read book Smart Nanocontainers written by Phuong Nguyen Tri and published by Elsevier. This book was released on 2019-11-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Nanocontainers explores the fundamental concepts and emerging applications of nanocontainers in biomedicine, pharmaceuticals and smart materials. In pharmaceuticals, nanocontainers have advantages over their micro-counterparts, including more efficient drug detoxification, higher intracellular uptake, better stability, less side effects and higher biocompatibility with tissue and cells. In materials science, such as coating technology, they help by making coatings smarter, stronger and more durable. This important reference will help anyone who wants to learn more on how nanocontainers are used to provide the controlled release of active agents, including their applications in smart coatings, corrosion, drug delivery, diagnosis, agri-food and gas storage. - Discusses how the molecular design of nanocarriers can be optimized to increase performance - Explores how nanocarriers are being used to produce a new generation of active coatings - Explains how nanocarriers are being used to deliver more effective nanoscale drug delivery

Download or read book Sustainable Preparation of Metal Nanoparticles written by Rafael Luque and published by Royal Society of Chemistry. This book was released on 2013 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely publication bridges and presents the latest trends and updates in three hot topics of current and future society: nanomaterials, energy and environment. It provides the state-of-the-art as well as current challenges and advances in the sustainable preparation of metal nanoparticles and their applications. The book fills a critical gap in a multidisciplinary area of high economic, social and environmental importance. Currently, there are no books published that deal with these ever increasing important topics, as most books in this area focus on a particular topic (eg. nanomaterials or catalysis or energy or environment). This is the first multidisciplinary edited book covering the very basics to the more advanced, trendy developments, containing a unique blend of nano, green, renewable and bio.

Download or read book Metal Oxides in Nanocomposite Based Electrochemical Sensors for Toxic Chemicals written by A. Pandikumar and published by Elsevier. This book was released on 2021-04-21 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxide nanomaterials exhibit interesting electrical and photochemical properties because of their size, stability, and high surface area that render them as great choices in fabricating alternative electrode materials for electrochemical energy storage and sensor applications. The hybridization of metal oxides with other materials lead to the improvement in electrical conductivity, stability, and electron transfer kinetics during the electrocatalytic reactions. These key factors result in greater sensitivity of the sensor materials towards the analyte molecules. This book reviews the electrochemical determination of a variety of toxic chemical contaminants using metal oxide-based nanocomposite materials. Ultrasensitive and selective detection of toxic chemical contaminants is important and demanding, especially for monitoring and controlling environmental pollution. In recent years, metal oxide-based nanocomposite materials have shown high potential in the electrochemical detection of heavy metals, inorganic anions, phenolic compounds, pesticides, and chemical warfare reagents. Metal Oxides in Nanocomposite-Based Electrochemical Sensors for Toxic Chemicals comprehensively reviews this topic. In addition to the instrumental simplicity, the electrochemical methods show the improved sensor performance through the synergetic effect of metal oxide and other electroactive nanomaterial present in the nanocomposite. Thus, detailed information on the electrochemical sensing of toxic chemical contaminants using metal oxide-based nanomaterials are discussed. The recent progress in developing electrochemical sensors using metal oxide-based nanocomposite materials and perspectives on future opportunities in sensor research and development are addressed in the book. - Introduces the fundamentals of electrochemical sensors and fabrication of metal oxide sensors of toxic chemicals - Reviews binary, doped, metal oxide-metal, metal oxide-carbon, metal oxide-polymer, metal-boron nitride, metal oxide-clay, and metal oxide- MOF electrodes - Systematically addresses the fabrication, synthesis, performance, mechanisms, detection limits, sensitivity, advantages and limitations and future perspectives of a wide range of metal oxide-based electrochemical sensors

Download or read book Industrial Applications of Nanomaterials written by Sabu Thomas and published by Elsevier. This book was released on 2019-08-12 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of Nanomaterials explains the industry based applications of nanomaterials, along with their environmental impacts, lifecycle analysis, safety and sustainability. This book brings together the industrial applications of nanomaterials with the incorporation of various technologies and areas, covering new trends and challenges. Significant properties, safety and sustainability and environmental impacts of synthesis routes are also explored, as are major industrial applications, including agriculture, medicine, communication, construction, energy, and in the military. This book is an important information source for those in research and development who want to gain a greater understanding of how nanotechnology is being used to create cheaper, more efficient products. - Explains how different classes of nanomaterials are being used to create cheaper, more efficient products - Explores the environmental impacts of using a variety of nanomaterials - Discusses the challenges faced by engineers looking to integrate nanotechnology in new product development

Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.

Download or read book Surface modified Nanobiomaterials for Electrochemical and Biomedicine Applications written by Alain R. Puente-Santiago and published by Springer Nature. This book was released on 2020-07-27 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry Collections presents critical reviews from the journal Topics in Current Chemistry organized in topical volumes. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field.

Download or read book Green Metal Nanoparticles written by Suvardhan Kanchi and published by John Wiley & Sons. This book was released on 2018-11-06 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book uniquely focuses on the exploration of the green synthesis of metal nanoparticles and their characterization and applications. Metal nanoparticles are the basic elements of nanotechnology as they are the primary source used in the design of nanostructured devices and materials. Nanomaterials can be manufactured either incidentally, with physical or chemical methods, or naturally; and the high demand for them has led to their large-scale production by various toxic solvents or high energy techniques. However, due to the growing awareness of environmental and safety issues, the use of clean, nontoxic and environment-friendly ways to synthesize metal nanoparticles has emerged out of necessity. The use of biological resources, such as microbes, plant parts, vegetable wastes, agricultural wastes, gums, etc., has grown to become an alternative way of synthesizing metal nanoparticles. This biogenic synthesis is green, environmentally friendly, cost-effective, and nontoxic. The current multi-authored book includes recent information and builds a database of bioreducing agents for various metal nanoparticles using different precursor systems. Green Metal Nanoparticles also highlights different simple, cost-effective, environment-friendly and easily scalable strategies, and includes parameters for controlling the size and shape of the materials developed from the various greener methods.

Download or read book Metal Nanoparticles written by Daniel L. Fedlheim and published by CRC Press. This book was released on 2001-10-26 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art reference, Metal Nanoparticles offers the latest research on the synthesis, characterization, and applications of nanoparticles. Following an introduction of structural, optical, electronic, and electrochemical properties of nanoparticles, the book elaborates on nanoclusters, hyper-Raleigh scattering, nanoarrays, and several applications including single electron devices, chemical sensors, biomolecule sensors, and DNA detection. The text emphasizes how size, shape, and surface chemistry affect particle performance throughout. Topics include synthesis and formation of nanoclusters, nanosphere lithography, modeling of nanoparticle optical properties, and biomolecule sensors.

Download or read book Nanomaterials in Chromatography written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2018-06-08 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials in Chromatography: Current Trends in Chromatographic Research Technology and Techniques provides recent advancements in the wide variety of chromatographic techniques applied to nanotechnology. As nanomaterials' unique properties can improve detection sensitivity and miniaturize the devices used in analytical procedures, they can substantially affect the evaluation and analysis ability of scientists and researchers and foster exciting developments in separation science. The book includes chapters on such crucial topics as the use of nanomaterials in sample preparation and the legalization of nanomaterials, along with a section on reducing the cost of the analysis process, both in terms of chemicals and time consumption. - Presents several techniques for nanomaterials in chromatography, including well-known materials like carbon nanomaterials and functionalized nanomaterials - Includes suggested readings at the end of each chapter for those who need further information or specific details, from standard handbooks, to journal articles - Covers not only applications of nanomaterials in chromatography, but also their environmental impact in terms of toxicity and economic effects

Download or read book Graphene Oxide written by Ayrat M. Dimiev and published by John Wiley & Sons. This book was released on 2016-11-14 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its unique properties, graphene oxide has become one of the most studied materials of the last decade and a great variety of applications have been reported in areas such as sensors, catalysis and biomedical applications. This comprehensive volume systematically describes the fundamental aspects and applications of graphene oxide. The book is designed as an introduction to the topic, so each chapter begins with a discussion on fundamental concepts, then proceeds to review and summarize recent advances in the field. Divided into two parts, the first part covers fundamental aspects of graphene oxide and includes chapters on formation and chemical structure, characterization methods, reduction methods, rheology and optical properties of graphene oxide solutions. Part Two covers numerous graphene oxide applications including field effect transistors, transparent conductive films, sensors, energy harvesting and storage, membranes, composite materials, catalysis and biomedical applications. In each case the differences and advantages of graphene oxide over its non-oxidised counterpart are discussed. The book concludes with a chapter on the challenges of industrial-scale graphene oxide production. Graphene Oxide: Fundamentals and Applications is a valuable reference for academic researchers, and industry scientists interested in graphene oxide, graphene and other carbon materials.

Download or read book Nanoparticle Technology Handbook written by Makio Naito and published by Elsevier. This book was released on 2018-03-06 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticle Technology Handbook, Third Edition, is an updated and expanded authoritative reference providing both the theory behind nanoparticles and the practical applications of nanotechnology. This third edition features twenty new chapters, providing a reference much broader in scope than the previous edition. Over 140 experts in nanotechnology and/or particle technology contributed to this new edition. The book not only includes the theory behind nanoparticles, but also the practical applications of nanotechnology. It examines future possibilities and new innovations and contains important knowledge on nanoparticle characterization and the effect of nanoparticles on the environment and humans. Nanoparticle technology is a new and revolutionary technology, which is increasingly used in electronic devices and nanomaterials. It handles the preparation, processing, application and characterization of nanoparticles and has become the core of nanotechnology as an extension of conventional fine particle/powder technology. Nanoparticle technology plays an important role in the implementation of nanotechnology in many engineering and industrial fields, including electronic devices, advanced ceramics, new batteries, engineered catalysts, functional paint and ink, drug delivery system, biotechnology, etc., making use of the unique properties of nanoparticles, which are completely different from those of bulk materials. - Introduces all aspects of nanoparticle technology, from the fundamentals to applications - Cover basic information on preparation through to the characterization of nanoparticles in a systematic way - Features information on nanostructures, which play an important role in practical applications - Includes the effects of nanoparticles on human health and the environment - Includes applications of nanoparticles in diverse fields, including applications in new areas, such as electronics cosmetics, etc. - Offers up-to-date information given by specialists in each field