Download or read book Collisions Engineering Theory and Applications written by Michel Frémond and published by Springer. This book was released on 2016-07-28 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates collisions occurring in the motion of solids, in the motion of fluids but also in the motion of pedestrians in crowds. The duration of these presented collisions is short compared to the whole duration of the motion: they are assumed instantaneous. The innovative concept demonstrated in this book is that a system made of two solids, is deformable because their relative position changes. The definition of the velocities of deformation of the system introduced in the classical developments of mechanics, the principle of the virtual work and the laws of thermodynamics, allows a large range of applications such as crowd motions, debris flow motions, and shape memory alloys motions. The set of the applications is even larger: social sciences and mechanics are unified to predict the motion of crowds with application to transport management and to evacuation of theaters management.
Download or read book Structural Mechanics written by Einar N. Strømmen and published by Springer Nature. This book was released on 2020-05-25 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book covers the principles and methods of load effect calculations that are necessary for engineers and designers to evaluate the strength and stability of structural systems. It contains the mathematical development from basic assumptions to final equations ready for practical use. It starts at a basic level and step by step it brings the reader up to a level where the necessary design safety considerations to static load effects can be performed, i.e. to a level where cross sectional forces and corresponding stresses can be calculated and compared to the strength of the system. It contains a comprehensive coverage of elastic buckling, providing the basis for the evaluation of structural stability. It includes general methods enabling designers to calculate structural displacements, such that the system may fulfil its intended functions. It is taken for granted that the reader possess good knowledge of calculus, differential equations and basic matrix operations. The finite element method for line-like systems has been covered, but not the finite element method for shells and plates.
Download or read book Theory of Differential Equations in Engineering and Mechanics written by Kam Tim Chau and published by CRC Press. This book was released on 2017-09-22 with total page 1399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This gives comprehensive coverage of the essential differential equations students they are likely to encounter in solving engineering and mechanics problems across the field -- alongside a more advance volume on applications. This first volume covers a very broad range of theories related to solving differential equations, mathematical preliminaries, ODE (n-th order and system of 1st order ODE in matrix form), PDE (1st order, 2nd, and higher order including wave, diffusion, potential, biharmonic equations and more). Plus more advanced topics such as Green’s function method, integral and integro-differential equations, asymptotic expansion and perturbation, calculus of variations, variational and related methods, finite difference and numerical methods. All readers who are concerned with and interested in engineering mechanics problems, climate change, and nanotechnology will find topics covered in these books providing valuable information and mathematics background for their multi-disciplinary research and education.
Download or read book Mechanical Design Theory and Methodology written by Manjula B. Waldron and published by Springer Science & Business Media. This book was released on 2013-04-09 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, Mechanical Design: Theory and Methodology, has been put together over the past four years. Most of the work is ongoing as can be ascertained easily from the text. One can argue that this is so for any text or monograph. Any such book is only a snapshot in time, giving information about the state of knowledge of the authors when the book was compiled. The chapters have been updated and are representative of the state of the art in the field of design theory and methodology. It is barely over a decade that design as an area of study was revived, mostly at the behest of industry, government, and academic leaders. Profes sor Nam Suh, then the head of the Engineering Directorate at the National Science Foundation, provided much of the impetus for the needed effort. The results of early work of researchers, many of whom have authored chapters in this book, were fundamental in conceiving the ideas behind Design for X or DFX and concurrent engineering issues. The artificial intelli gence community had a strong influence in developing the required com puter tools mainly because the field had a history of interdisciplinary work. Psychologists, computer scientists, and engineers worked together to under stand what support tools will improve the design process. While this influ ence continues today, there is an increased awareness that a much broader community needs to be involved.
Download or read book Biomechanics of the Gastrointestinal Tract written by Hans Gregersen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomechanics of the Gastrointestinal Tract is an up-to-date book for researchers on the study of the mechanical properties and the motor system of the gastrointestinal tract. A well-illustrated book, it provides a comprehensive overview to relevant tissue geometry, morphology and biomechanical theory. Separate chapters cover smooth muscle and nerve function including the application to animal and human studies of motility, symptoms and pain, determination of the true resting state, history-dependent properties, and tissue remodelling in disease. Several methods and diagnostic applications such as determination of in vivo length-tension diagrams and multimodal pain testing are completely new but will undoubtedly be used by many in the future. New non-invasive imaging techniques based on ultrasound, MR- and CT-scanning in combination with balloon distension are emerging as the techniques for future in vivo studies.
Download or read book Theory of Elasticity written by A.I. Lurie and published by Springer Science & Business Media. This book was released on 2010-05-30 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classical theory of elasticity maintains a place of honour in the science ofthe behaviour ofsolids. Its basic definitions are general for all branches of this science, whilst the methods forstating and solving these problems serve as examples of its application. The theories of plasticity, creep, viscoelas ticity, and failure of solids do not adequately encompass the significance of the methods of the theory of elasticity for substantiating approaches for the calculation of stresses in structures and machines. These approaches constitute essential contributions in the sciences of material resistance and structural mechanics. The first two chapters form Part I of this book and are devoted to the basic definitions ofcontinuum mechanics; namely stress tensors (Chapter 1) and strain tensors (Chapter 2). The necessity to distinguish between initial and actual states in the nonlinear theory does not allow one to be content with considering a single strain measure. For this reason, it is expedient to introduce more rigorous tensors to describe the stress-strain state. These are considered in Section 1.3 for which the study of Sections 2.3-2.5 should precede. The mastering of the content of these sections can be postponed until the nonlinear theory is studied in Chapters 8 and 9.
Download or read book Stability Theory and Its Applications to Structural Mechanics written by Clive L. Dym and published by Courier Dover Publications. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integration of modern work in structural stability theory, this volume focuses on the Koiter postbuckling analyses, with mathematical notions of stability of motion. In relation to discrete and continuous systems, it bases the minimum energy principles for static stability upon the dynamic concepts of stability of motion. It further develops the asymptotic buckling and postbuckling analyses from potential energy considerations, with applications to columns, plates, and arches.
Download or read book Theory of Elasticity for Scientists and Engineers written by Teodor M. Atanackovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be an introduction to elasticity theory. It is as sumed that the student, before reading this book, has had courses in me chanics (statics, dynamics) and strength of materials (mechanics of mate rials). It is written at a level for undergraduate and beginning graduate engineering students in mechanical, civil, or aerospace engineering. As a background in mathematics, readers are expected to have had courses in ad vanced calculus, linear algebra, and differential equations. Our experience in teaching elasticity theory to engineering students leads us to believe that the course must be problem-solving oriented. We believe that formulation and solution of the problems is at the heart of elasticity theory. 1 Of course orientation to problem-solving philosophy does not exclude the need to study fundamentals. By fundamentals we mean both mechanical concepts such as stress, deformation and strain, compatibility conditions, constitu tive relations, energy of deformation, and mathematical methods, such as partial differential equations, complex variable and variational methods, and numerical techniques. We are aware of many excellent books on elasticity, some of which are listed in the References. If we are to state what differentiates our book from other similar texts we could, besides the already stated problem-solving ori entation, list the following: study of deformations that are not necessarily small, selection of problems that we treat, and the use of Cartesian tensors only.
Download or read book Introduction to Unified Mechanics Theory with Applications written by Cemal Basaran and published by Springer Nature. This book was released on 2021-02-02 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes the mathematical formulation and proof of the unified mechanics theory (UMT) which is based on the unification of Newton’s laws and the laws of thermodynamics. It also presents formulations and experimental verifications of the theory for thermal, mechanical, electrical, corrosion, chemical and fatigue loads, and it discusses why the original universal laws of motion proposed by Isaac Newton in 1687 are incomplete. The author provides concrete examples, such as how Newton’s second law, F = ma, gives the initial acceleration of a soccer ball kicked by a player, but does not tell us how and when the ball would come to a stop. Over the course of Introduction to Unified Mechanics Theory, Dr. Basaran illustrates that Newtonian mechanics does not account for the thermodynamic changes happening in a system over its usable lifetime. And in this context, this book explains how to design a system to perform its intended functions safely over its usable life time and predicts the expected lifetime of the system without using empirical models, a process currently done using Newtonian mechanics and empirical degradation/failure/fatigue models which are curve-fit to test data. Written as a textbook suitable for upper-level undergraduate mechanics courses, as well as first year graduate level courses, this book is the result of over 25 years of scientific activity with the contribution of dozens of scientists from around the world including USA, Russia, Ukraine, Belarus, Spain, China, India and U.K.
Download or read book Continuum Mechanics and Theory of Materials written by Peter Haupt and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition includes additional analytical methods in the classical theory of viscoelasticity. This leads to a new theory of finite linear viscoelasticity of incompressible isotropic materials. Anisotropic viscoplasticity is completely reformulated and extended to a general constitutive theory that covers crystal plasticity as a special case.
Download or read book Theory of Machines written by Shivendra Nandan and published by TSG Publications. This book was released on with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject theory of machine may be defined as that branch of engineering science which deals with the study of relative motion both the various parts of m/c and forces which act on them.
Download or read book Theory of Plasticity written by Jagabanduhu Chakrabarty and published by Elsevier. This book was released on 2012-12-02 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with the mechanics of materials deformed beyond their elastic limit. A strong knowledge of plasticity is essential for engineers dealing with a wide range of engineering problems, such as those encountered in the forming of metals, the design of pressure vessels, the mechanics of impact, civil and structural engineering, as well as the understanding of fatigue and the economical design of structures. Theory of Plasticity is the most comprehensive reference on the subject as well as the most up to date -- no other significant Plasticity reference has been published recently, making this of great interest to academics and professionals. This new edition presents extensive new material on the use of computational methods, plus coverage of important developments in cyclic plasticity and soil plasticity. - A complete plasticity reference for graduate students, researchers and practicing engineers; no other book offers such an up to date or comprehensive reference on this key continuum mechanics subject - Updates with new material on computational analysis and applications, new end of chapter exercises - Plasticity is a key subject in all mechanical engineering disciplines, as well as in manufacturing engineering and civil engineering. Chakrabarty is one of the subject's leading figures.
Download or read book Mechanical Engineering Craft Theory and Related Subjects written by Roger Leslie Timings and published by Longman Publishing Group. This book was released on 1983 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Engineering Craft Theory Volumes 1 and 2 provide the craft-level student with an extremely solid grounding in the processes he will use daily throughout his career. The authors are both mechanical engineers with a wealth of teaching experience. Key features of the book are: comprehensive coverage of many syllabuses little previous knowledge assumed chapters covering related mathematics and science numerous worked examples to aid understanding over 400 clearly labelled illustrations glossary providing simple, accurate definitions of key terms questions which may be used for evaluation and revision.
Download or read book Linear Elastic Fracture Mechanics for Engineers Theory and Applications written by L.P. Pook and published by WIT Press. This book was released on 2000-01-24 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fulfills the need for a short, modern, introductory text on linear elastic fracture mechanics and its engineering applications. Suitable for use by engineering undergraduates, and other newcomers to the subject, it:- • Explains the main ideas underlying present day linear elastic fracture mechanics and how these have been developed. • Shows how the ideas can be used to carry out calculations answering the question 'Does this crack matter?' from the viewpoint of an engineering designer. • Provides an understanding of the basis of standard methods and software employed to carry out calculations. • Includes additional, more advanced material, where this will increase understanding of the sometimes formidable mathematics involved, and of the various simplifications and approximations used in practical applications. The author includes all the material central to an undergraduate introductory course and ends each chapter with an overview of the material covered to aid accessibility. Familiarity with the mechanical properties of metallic materials, and with the linear elastic stress analysis of uncracked bodies is assumed.
Download or read book Schaum s Outline of Theory and Problems of Engineering Mechanics written by William G. McLean and published by . This book was released on 1962 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to the Theory of Control in Mechanical Engineering written by R. H. Macmillan and published by Cambridge University Press. This book was released on 2016-05-26 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1951 and the first English book on the subject, this textbook is aimed at both the specialist and non-specialist alike and provides a thorough and detailed introduction on the principles that underlie the action of automatic controls, servo-mechanisms and regulators. The early chapters provide a solid foundation to the theory of control and are in the most part descriptive, introducing fundamental terminology and explaining the principles, which underlie the operation of all control systems, whilst in the last three chapters more advanced techniques are used to give an account of the methods employed by control engineers. Modern contributions to the theory at the time are included and questions are set at the end of each chapter. Giving a 'historical summary of the main landmarks in the development of control theory', this book will be of value to anyone with an interest in the history of engineering.
Download or read book Unified Strength Theory and Its Applications written by Mao-Hong Yu and published by Springer. This book was released on 2017-11-21 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book thoroughly describes a theory concerning the yield and failure of materials under multi-axial stresses – the Unified Strength Theory, which was first proposed by the author and has been frequently quoted since. It provides a system of yield and failure criteria adopted for most materials, from metals to rocks, concretes, soils, and polymers. This new edition includes six additional chapters: General behavior of Strength theory function; Visualization of the Unified Strength Theory; Equivalent Stress of the UST and Comparisons with other criteria; Economic Signification of the UST; General form of failure criterion; Beauty of Strength Theories. It is intended for researchers and graduate students in various fields, including engineering mechanics, material mechanics, plasticity, soil mechanics, rock mechanics, mechanics of metallic materials and civil engineering, hydraulic engineering, geotechnical engineering, mechanical engineering and military engineering.
