Download or read book The Physics of Glassy Polymers written by R. N. Haward and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work sets out to provide an up-to-date account of the physical properties and structure of polymers in the glassy state. Properties measured above the glass transition temperature are therefore included only in so far as is necessary for the treatment of the glass transition process. This approach to the subject therefore excludes any detailed account of rubber elasticity or melt rheology or of the structure and conformation of the long chain molecule in solution, although knowledge derived from this field is assumed where required. Major emphasis is placed on structural and mechanical properties, although a number of other physical properties are included. Naturally the different authors contributing to the book write mainly from their own particular points of view and where there are several widely accepted theoretical approaches to a subject, these are sometimes provided in different chapters which will necessarily overlap to a significant extent. For example, the main theoretical presentation on the subject of glass transition is given in Chapter 1. This is supplemented by accounts of the free volume theory in Chapter 3 and in the Introduction, and a short account of the work of Gibbs and DiMarzio, also in Chapter 3. Similarly, there is material on solvent cracking in Chapters 7 and 9, though the two workers approach the subject from opposite directions. Every effort has therefore been made to encourage cross-referencing between different chapters.

Download or read book Structure and Properties of Glassy Polymers written by Martin R. Tant and published by . This book was released on 1998 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: In twenty-nine chapters by leading authorities, Structure and Properties of Glassy Polymers provides readers with comprehensive coverage of basic and applied research on glass polymers as well as a wealth of information on current topics such as molecular modeling, characterization, polymer glasses in confined spaces, and conducting glass polymers. The characterization techniques presented include temperature-modulated differential scanning calorimetry, dielectric loss spectroscopy, photochemical hole burning, positron annihilation lifetime spectroscopy, and transient current generation.

Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.

Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.

Download or read book Structure and Properties of Oriented Polymers written by I. Ward and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible.

Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.

Download or read book Toughened Plastics written by C. Bucknall and published by Springer. This book was released on 2013-12-19 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fracture Behaviour of Polymers written by A.J. Kinloch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over recent years there has been a tremendous upsurge in interest in the fracture behaviour of polymers. One reason for this is the increas ing use of polymers in structural engineering applications, since in such circumstances it is essential to have as complete an understanding as possible of the polymer's fracture behaviour. This book is designed to meet the requirements of those who need to be informed of the latest developments in the field of polymer fracture. It is written particularly for research workers but it should also prove invaluable for advanced students taking final-year undergraduate or postgraduate courses. The main emphasis is upon the use of fracture mechanics in the study of polymer fracture but this approach is then developed to cover the micromechanisms of the fracture process. Particular prominence is given to the relationship between structure, mechanical properties and the mechanics and mechanisms of fracture. The first chapter is a brief introduction which has several aims. One is to introduce polymers to the reader who does not have a strong background in the subject and another is to provide background material that will be used at later stages. The book is then split into two main parts: the first deals with the mechanics and mechanisms whilst the second is concerned with materials. In Part I phenomena such as molecular fracture, fracture mechanics, shear yielding and crazing are covered from a general viewpoint.

Download or read book Foaming with Supercritical Fluids written by Ernesto Di Maio and published by Elsevier. This book was released on 2021-11-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foaming with Supercritical Fluids, Volume Nine provides a comprehensive description of the use of supercritical fluids as blowing agents in polymer foaming. To this aim, the fundamental issues on which the proper design and control of this process are rooted are discussed in detail, with specific attention devoted to the theoretical and experimental aspects of sorption thermodynamics of a blowing agent within a polymer, the effect of the absorbed blowing agent on the thermal, interfacial and rheological properties of the expanding matter, and the phase separation of the gaseous phase, and of the related bubble nucleation and growth phenomena. Several foaming technologies based on the use of supercritical blowing agents are then described, addressing the main issues in the light of the underlying chemical-physical phenomena. - Offers strong fundamentals on polymer properties important on foaming - Outlines the use of supercritical fluids for foaming - Covers theoretical points-of-view, including foam formation of the polymer/gas solution to the setting of the final foam - Discusses the several processing technologies and applications

Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.

Download or read book Viscoelastic Properties of Polymers written by John D. Ferry and published by John Wiley & Sons. This book was released on 1980-09-16 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelastic behavior reflects the combined viscous and elastic responses, under mechanical stress, of materials which are intermediate between liquids and solids in character. Polymers the basic materials of the rubber and plastic industries and important to the textile, petroleum, automobile, paper, and pharmaceutical industries as well exhibit viscoelasticity to a pronounced degree. Their viscoelastic properties determine the mechanical performance of the final products of these industries, and also the success of processing methods at intermediate stages of production. Viscoelastic Properties of Polymers examines, in detail, the effects of the many variables on which the basic viscoelastic properties depend. These include temperature, pressure, and time; polymer chemical composition, molecular weight and weight distribution, branching and crystallinity; dilution with solvents or plasticizers; and mixture with other materials to form composite systems. With guidance by molecular theory, the dependence of viscoelastic properties on these variables can be simplified by introducing certain ancillary concepts such as the fractional free volume, the monomeric friction coefficient, and the spacing between entanglement loci, to provide a qualitative understanding and in many cases a quantitative prediction of how to achieve desired results. The phenomenological theory of viscoelasticity which permits interrelation of the results of different types of experiments is presented first, with many useful approximation procedures for calculations given. A wide variety of experimental methods is then described, with critical evaluation of their applicability to polymeric materials of different consistencies and in different regions of the time scale (or, for oscillating deformations, the frequency scale). A review of the present state of molecular theory follows, so that viscoelasticity can be related to the motions of flexible polymer molecules and their entanglements and network junctions. The dependence of viscoestic properties on temperature and pressure, and its descriptions using reduced variables, are discussed in detail. Several chapters are then devoted to the dependence of viscoelastic properties on chemical composition, molecular weight, presence of diluents, and other features, for several characteristic classes of polymer materials. Finally, a few examples are given to illustrate the many potential applications of these principles to practical problems in the processing and use of rubbers, plastics, and fibers, and in the control of vibration and noise. The third edition has been brought up to date to reflect the important developments, in a decade of exceptionally active research, which have led to a wider use of polymers, and a wider recognition of the importance and range of application of viscoelastic properties. Additional data have been incorporated, and the book s chapters on dilute solutions, theory of undiluted polymers, plateau and terminal zones, cross-linked polymers, and concentrated solutions have been extensively rewritten to take into account new theories and new experimental results. Technical managers and research workers in the wide range of industries in which polymers play an important role will find that the book provides basic information for practical applications, and graduate students in chemistry and engineering will find, in its illustrations with real data and real numbers, an accessible introduction to the principles of viscoelasticity.

Download or read book Nonlinear Polymer Rheology written by Shi-Qing Wang and published by John Wiley & Sons. This book was released on 2018-02-06 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating latest research results and characterization techniques, this book helps readers understand and apply fundamental principles in nonlinear polymer rheology. The author connects the basic theoretical framework with practical polymer processing, which aids practicing scientists and engineers to go beyond the existing knowledge and explore new applications. Although it is not written as a textbook, the content can be used in an upper undergraduate and first year graduate course on polymer rheology. • Describes the emerging phenomena and associated conceptual understanding in the field of nonlinear polymer rheology • Incorporates details on latest experimental discoveries and provides new methodology for research in polymer rheology • Integrates latest research results and new characterization techniques like particle tracking velocimetric method • Focuses on the issues concerning the conceptual and phenomenological foundations for polymer rheology • Has a companion website for readers to access with videos complementing the content within several chapters

Download or read book Biosurfaces written by Kantesh Balani and published by John Wiley & Sons. This book was released on 2015-01-23 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal as a graduate textbook, this title is aimed at helping design effective biomaterials, taking into account the complex interactions that occur at the interface when a synthetic material is inserted into a living system. Surface reactivity, biochemistry, substrates, cleaning, preparation, and coatings are presented, with numerous case studies and applications throughout. Highlights include: Starts with concepts and works up to real-life applications such as implantable devices, medical devices, prosthetics, and drug delivery technology Addresses surface reactivity, requirements for surface coating, cleaning and preparation techniques, and characterization Discusses the biological response to coatings Addresses biomaterial-tissue interaction Incorporates nanomechanical properties and processing strategies

Download or read book Mechanical Properties of Glassy Polymers Containing Saturated Rings written by Johannis Heijboer and published by . This book was released on 1972 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to the Mechanical Properties of Solid Polymers written by I. M. Ward and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the mechanical behaviour of solid polymers. Extensively revised and updated throughout, the second edition now includes new material on mechanical relaxations and anisotropy, composites modelling, non-linear viscoelasticity, yield behaviour and fracture of tough polymers. The accessible approach of the book has been retained with each chapter designed to be self contained and the theory and applications of the subject carefully introduced where appropriate. The latest developments in the field are included alongside worked examples, mathematical appendices and an extensive reference. Fully revised and updated throughout to include all the latest developments in the field Worked examples at the end of the chapter An invaluable resource for students of materials science, chemistry, physics or engineering studying polymer science

Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.

Download or read book Glass Fibre Reinforced Polymer Composites written by Jalumedi Babu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-05-05 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are engineered materials, made from two or more constituents with significantly different physical or chemical properties which remain separate on a macroscopic level within the finished structure. Due to their special mechanical and physical properties they have the potential to replace conventional materials.