Download or read book The Handbook of Maintenance Management written by Joel Levitt and published by Industrial Press Inc.. This book was released on 1997 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of maintenance is hard to approach because the language is strange. This book introduces the fundamentals of maintenance and will allow the outsider to understand the jargon. The book offers a complete survey of the field, a review of maintenance management, a manual for cost reduction, a primer for the stock room, and a training regime for new supervisors, managers and planners.

Download or read book Complete Guide to Preventive and Predictive Maintenance written by Joel Levitt and published by Industrial Press Inc.. This book was released on 2003 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Best practices, mistakes, victories, and essential steps for success.

Download or read book The Little Black Book of Maintenance Excellence written by Daniel T. Daley and published by Industrial Press Inc.. This book was released on 2008 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the reader with a concise yet informative description of all the various forms of maintenance. Highlights the important elements of each of the various forms of maintenance and how to go about organizing those elements in his plant or facility. Offers the reader with the tools needed to integrate initiatives leading to improved reliability with each kind of maintenance. Provides the reader with tools needed to enhance effectiveness and efficiency in each kind of maintenance. Gives both new and more experienced plant and shop personnel with a tool they can use to develop a consistent understanding of maintenance excellence so they can identify common goals and consistent objectives. Includes forms and formats that can be used for the following: Job Delay Survey, Accountability-Responsibility Matrix, Role Description, Project Control Document, and Work Scoping Form. This book provides an introduction to the concept of "excellence" in the several forms of maintenance used during the life of any system or facility. Unlike most books that tend to focus on just one of the areas of maintenance, this book looks at all the distinct forms of maintenance including: Routine Maintenance, Turnaround Maintenance, Program Maintenance, Project (Maintenance) Management, Reliability in Maintenance, Predictive and Preventive Maintenance, and Precision Maintenance. Rather than simply focusing on "how to get the work done", this concise resource focuses on Maintenance Excellence and meeting its objectives more effectively and more efficiently. Uniquely designed for busy people who want and need to learn more about maintenance excellence but have a limited amount of time to do so, each chapter is designed to provide a stand-alone learning opportunity for individuals who have an opportunity to pick the book up over lunch or whenever the opportunity arises. Additionally, it emphasizes the part that effective and efficient maintenance plays in achieving good reliability so it provides an excellent companion for The Little Black Book of Reliability Management which was designed to be used in the same manner. This set of books is intended to provide the young professionals working in this area with a quick introduction to all the subjects they will need to learn. It is also intended for more senior managers and executives who are not experts in either maintenance or reliability, but need to be conversant with its elements.

Download or read book Maintenance and Reliability Best Practices written by Ramesh Gulati and published by Industrial Press. This book was released on 2012-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing upon the authors many years of shop floor and management experience in a variety of industries, this

Download or read book Aviation Maintenance Management Second Edition written by Harry A. Kinnison and published by McGraw Hill Professional. This book was released on 2012-12-04 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The premier textbook for learning aircraft maintenance from a management perspective. Revised and up-dated to include recent technological, certification and maintenance updates"--Provided by publisher.

Download or read book Leadership Skills for Maintenance Supervisors and Managers written by Joel D. Levitt and published by CRC Press. This book was released on 2020-12-23 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supervision is a leveraged activity. When we develop the supervisor's skills, we enhance the productivity of the whole workgroup. This book provides valuable skill training for supervisors, team leaders, and managers. It offers techniques to improve reliability that can be accomplished at the supervisor level. It teaches both the science and the art of the supervision of maintenance workers, discusses managing meetings and time, the elements of technical issues, and presents management and people skills, offering maximum productivity and high-quality provision of services and at the same time, improving morale throughout the workforce. This book is suitable for all types of maintenance for organizations with supervisors and managers from plant operations, storeroom, construction, and related areas including industrial organizations, construction companies, mines, fleets, building maintenance, janitorial maintenance contractors, and vocational tech schools teaching maintenance short courses.

Download or read book Managing Factory Maintenance written by Joel Levitt and published by Industrial Press Inc.. This book was released on 2005 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tap into Joel Levitt's vast array of experience and learn how to improve almost any aspect of your maintenance organization (including your own abilities) This new edition of a classic first educates readers about the globalization of production and the changing of the guard of maintenance leadership, and then gives them real usable ideas to aid in these areas. Completely reorganized so that material is presented within the context of major sections, the second edition tells the story of maintenance management in factory settings. It provides coverage of potential problems and new opportunities, what bosses really want, specifics for improvement of maintenance and production, World Class Maintenance Management revisited and revised, quality improvement, complete coverage of current maintenance practices, processes, process aids, interfaces and strategies, as well as personal and personnel development strategies. Contains a specialized glossary so users can more easily understand the specialized language of factory maintenance. Provides specific "how-to" tips and concrete techniques and examples for continuous improvement. Updates the 20 steps to world class maintenance to include the 6 areas of focus for world class maintenance. Includes a completely updated maintenance evaluation questionnaire that reflects new techniques and technologies. Breaks down and explains the three-team approach to maintenance work. Offers new sections on: managing shutdowns, craft training, and communications. Contains major revisions to the RCM discussion and includes a new discussion about PMO.

Download or read book Aviation Maintenance Management written by Harry Kinnison and published by McGraw Hill Professional. This book was released on 2004-06-15 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique resource covers aircraft maintenance program development and operations from a managerial as well as technical perspective. Readers will learn how to save money by minimizing aircraft downtime and slashing maintenance and repair costs. * Plan and control maintenance * Coordinate activities of the various work centers * Establish an initial maintenance program * Develop a systems concept of maintenance * Identify and monitor maintenance problems and trends

Download or read book Maintenance Planning and Scheduling Handbook 4th Edition written by () (Doc) D. D. D. Palmer and published by McGraw Hill Professional. This book was released on 2019-09-13 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: The industry-standard resource for maintenance planning and scheduling—thoroughly revised for the latest advances Written by a Certified Maintenance and Reliability Professional (CMRP) with more than three decades of experience, this resource provides proven planning and scheduling strategies that will take any maintenance organization to the next level of performance. The book resolves common industry frustration with planning and reduces the complexity of scheduling in addition to dealing with reactive maintenance. You will find coverage of estimating labor hours, setting the level of plan detail, creating practical weekly and daily schedules, kitting parts, and more, all designed to increase your workforce without hiring. Much of the text applies the timeless management principles of Dr. W. Edwards Deming and Dr. Peter F. Drucker. You will learn how you can do more proactive work when your hands are full of reactive work. Maintenance Planning and Scheduling Handbook, Fourth Edition, features more new case studies showing real world successes, a new chapter on getting better storeroom support, major revisions that describe the best KPIs for planning, major additions to the issue of “selling” planning to gain support, revisions to make work order codes more useful, a new appendix on numerically auditing planning success, and a new appendix devoted entirely to selecting a great maintenance planner. Maintenance Planning and Scheduling Handbook, Fourth Edition covers: •The business case for the benefit of planning •Planning principles •Scheduling principles •Handling reactive maintenance •Planning a work order •Creating a weekly schedule •Daily scheduling and supervision •Parts and planners •The computer CMMS in maintenance •How planning works with PM, PdM, and projects •Controlling planning: the best KPIs KPIs for planning and overall maintenance •Shutdown, turnaround, overhaul, and outage management •Selling, organizing, analyzing, and auditing planning

Download or read book Maintenance of Instruments Systems written by Lawrence D. Goettsche and published by Isa. This book was released on 2005-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of maintenance requirements for pneumatic and electrical/electronic devices as well as of the DCS systems, analytical instrumentation, fiber optics, and smart instruments. This edition emphasises on documentation requirements and safety issues. It also addresses the regulations and standards.

Download or read book Maintenance Engineering Handbook written by Keith Mobley and published by McGraw Hill Professional. This book was released on 2008-04-20 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stay Up to Date on the Latest Issues in Maintenance Engineering The most comprehensive resource of its kind, Maintenance Engineering Handbook has long been a staple for engineers, managers, and technicians seeking current advice on everything from tools and techniques to planning and scheduling. This brand-new edition brings you up to date on the most pertinent aspects of identifying and repairing faulty equipment; such dated subjects as sanitation and housekeeping have been removed. Maintenance Engineering Handbook has been advising plant and facility professionals for more than 50 years. Whether you're new to the profession or a practiced veteran, this updated edition is an absolute necessity. New and updated sections include: Belt Drives, provided by the Gates Corporation Repair and Maintenance Cost Estimation Ventilation Fans and Exhaust Systems 10 New Chapters on Maintenance of Mechanical Equipment Inside: • Organization and Management of the Maintenance Function • Maintenance Practices • Engineering and Analysis Tools • Maintenance of Facilities and Equipment • Maintenance of Mechanical Equipment • Maintenance of Electrical Equipment • Instrumentation and Reliability Tools • Lubrication • Maintenance Welding • Chemical Corrosion Control and Cleaning

Download or read book World Class Maintenance Management The 12 Disciplines written by Rolly Angeles and published by . This book was released on 2020-06-07 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you have been living the day to day pressures and struggles of doing maintenance, then this is definitely a book for you. Life of a maintenance is typically a struggle as most industries end up being reactive all the times.

Download or read book Maintenance Costs and Life Cycle Cost Analysis written by Diego Galar and published by CRC Press. This book was released on 2017-09-18 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors have attempted to create coherent chapters and sections on how the fundamentals of maintenance cost should be organized, to present them in a logical and sequential order. Necessarily, the text starts with importance of maintenance function in the organization and moves to life cycle cost (LCC) considerations followed by the budgeting constraints. In the process, they have intentionally postponed the discussion about intangible costs and downtime costs later on in the book mainly due to the controversial part of it when arguing with managers. The book will be concluding with a short description of a number of sectors where maintenance cost is of critical importance. The goal is to train the readers for a deeper study and understanding of these elements for decision making in maintenance, more specifically in the context of asset management. This book is intended for managers, engineers, researchers, and practitioners, directly or indirectly involved in the area of maintenance. The book is focused to contribute towards better understanding of maintenance cost and use of this knowledge to improve the maintenance process. Key Features: • Emphasis on maintenance cost and life cycle cost especially under uncertainty. • Systematic approach of how cost models can be applied and used in the maintenance field. • Compiles and reviews existing maintenance cost models. • Consequential and direct costs considered. • Comparison of maintenance costs in different sectors, infrastructure, manufacturing, transport.

Download or read book Maintenance and Reliability Certification Exam Guide written by Nathan C. Wright and published by Industrial Press. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fields of maintenance & reliability, there are a number of certifications that "M&R" professionals may take to help further their careers, whether it be in the form of a promotion, a change of job, more money, or simply a title to add to their credentials. The exams for these tests assess the candidates' skills and knowledge in areas such as work management, equipment reliability, leadership and organization, knowledge of the different certifications' bodies of knowledge, manufacturing process reliability, and business management, as well as their ability to adhere to industry standards (both ANSI and ISO). Until now, there hasn't been a single volume for maintenance and reliability certification candidates to use as a study guide for these exams. The Maintenance and Reliability Certification Exam Guide fills the great need for such a resource by including: specifics about the different tests. how to study for each. information on where to focus review efforts. hundreds of sample exam questions. vital facts about re-certification. practical tips for maintenance and reliability professionals to take back with them to use on the job. Chapters include a list of performance objectives, review questions, as well as lists of supportive reading. Related graphs, tables, charts, and illustrations round out this indispensable work for all maintenance and reliability professionals seeking certification.

Download or read book The Complete Guide for CISA Examination Preparation written by Richard E. Cascarino and published by CRC Press. This book was released on 2020-10-05 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Complete Guide for CISA Examination Preparation delivers complete coverage of every topic on the latest release of the Certified Information Systems Auditor (CISA) exam. The author is an IT security and auditing expert and the book covers all five exam domains. This effective self-study system features chapter learning objectives, in-depth explanations of each topic, and accurate practice questions. Each chapter includes exam tips that highlight key exam information, hands-on exercises, a summary that serves as a quick review, and end-of-chapter questions that simulate those on the actual exam. Designed to help candidates pass the CISA exam easily, it also serves as an ideal on-the-job reference. Richard E. Cascarino, MBA, CIA, CISM, CFE, CRMA, is well known in international auditing. Richard is a principal of Richard Cascarino & Associates. He has over 31 years’ experience in audit training and consulting. He is a regular speaker at national and international conferences and has presented courses throughout Africa, Europe, the Middle East and the USA. Richard is a Past President of the Institute of Internal Auditors in South Africa, was the founding Regional Director of the Southern African Region of the IIA-Inc. and is a member of ISACA, and the Association of Certified Fraud Examiners, where he is a member of the Board of Regents for Higher Education. Richard was Chairman of the Audit Committee of Gauteng cluster 2 (Premier's office, Shared Services and Health) in Johannesburg and is currently the Chairman of the Audit and Risk Committee of the Department of Public Enterprises in South Africa. Richard is also a visiting Lecturer at the University of the Witwatersrand, author of the book Internal Auditing: An Integrated Approach, now in its third edition. This book is extensively used as a university textbook worldwide. In addition, he is the author of the Auditor's Guide to IT Auditing, Second Edition and the book Corporate Fraud and Internal Control: A Framework for Prevention. He is also a contributor to all four editions of QFINANCE, the Ultimate Resource.

Download or read book Maynard s Industrial and Systems Engineering Handbook Sixth Edition written by Bopaya Bidanda and published by McGraw Hill Professional. This book was released on 2022-09-16 with total page 1697 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic industrial engineering resource—fully updated for the latest advances Brought fully up to date by expert Bopaya M. Bidanda, this go-to handbook contains exhaustive, application-driven coverage of Industrial Engineering (IE) principles, practices, materials, and systems. Featuring contributions from scores of international professionals in the field, Maynard’s Industrial Engineering Handbook, Sixth Edition provides a holistic view of exactly what an Industrial Engineer in today’s world needs to succeed. All-new chapters and sections cover logistics, probability and statistics, supply chains, quality, product design, systems engineering, and engineering management. Coverage includes: Productivity Engineering economics Human factors, ergonomics, and safety Compensation management Facility logistics Planning and scheduling Operations research Statistics and probability Supply chains and quality Product design Manufacturing models and analysis Systems engineering Engineering management The global Industrial Engineer IE application environments

Download or read book Complete Guide to Human Resources and the Law 2020 Edition written by Shilling and published by Wolters Kluwer. This book was released on 2019-08-23 with total page 1878 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Complete Guide to Human Resources and the Law will help you navigate complex and potentially costly Human Resources issues. You'll know what to do (and what not to do) to avoid costly mistakes or oversights, confront HR problems - legally and effectively - and understand the rules. The Complete Guide to Human Resources and the Law offers fast, dependable, plain English legal guidance for HR-related situations from ADA accommodation, diversity training, and privacy issues to hiring and termination, employee benefit plans, compensation, and recordkeeping. It brings you the most up-to-date information as well as practical tips and checklists in a well-organized, easy-to-use resource. Previous Edition: Complete Guide to Human Resources and the Law, 2018 Edition ISBN 9781454899945