Download or read book Low rise Buildings on Fill written by Andrew Charles and published by . This book was released on 1998 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scarcity and cost of suitable land is leading increasingly to the development of sites where there are deep deposits of fill. Occasionally cases are reported where serious failures have occurred. These reports should not obscure the fact that many buildings have been successfully built on fill; they emphasise the importance of understanding the behaviour of fills, identifying potential hazards and adopting measures that will ensure successful development of these sites. Part 2 recommends that construction on existing filled areas should be preceded by careful investigation of the site which should be both appropriate and adequate. The site investigation may indicate that ground treatment is required before construction to improve the load-carrying properties of the fill, reducing or forestalling the effects of the unexpected. The Digest gives guidance only of a general nature and it must be recognised that the services of civil, structural and geotechnical engineers will usually be needed. Part 3 presents guidance for the specification and control of fills which are to be placed so that they can safely support low-rise buildings without the occurrence of damaging movements. Such fills are described as foundation fills. When new fill is to be placed, careful selection of the material and controlled placement should ensure that the fill forms an adequate foundation material. Part 3 is particularly relevant to building developments where relatively small volumes of fill are being placed (typically less than 50 000 m3) and consequently the resources available for design, testing, etc are quite limited. The Digest gives guidance only of a general nature and it must be recognised that the services of civil, structural and geotechnical engineers will usually be needed.

Download or read book Low rise Buildings on Fill written by Andrew Charles and published by . This book was released on 1997 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scarcity and cost of suitable land is leading increasingly to the development of sites where there are deep deposits of fill. Occasionally cases are reported where serious failures have occurred. These reports should not obscure the fact that many buildings have been successfully built on fill; they emphasise the importance of understanding the behaviour of fills, identifying potential hazards and adopting measures that will ensure successful development of these sites.

Download or read book Low rise Buildings on Fill written by Andrew Charles and published by . This book was released on 1998 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scarcity and cost of suitable land is leading increasingly to the development of sites where there are deep deposits of fill. Occasionally cases are reported where serious failures have occurred. These reports should not obscure the fact that many buildings have been successfully built on fill; they emphasise the importance of understanding the behaviour of fills, identifying potential hazards and adopting measures that will ensure successful development of these sites. Part 2 recommends that construction on existing filled areas should be preceded by careful investigation of the site which should be both appropriate and adequate. The site investigation may indicate that ground treatment is required before construction to improve the load-carrying properties of the fill, reducing or forestalling the effects of the unexpected. The Digest gives guidance only of a general nature and it must be recognised that the services of civil, structural and geotechnical engineers will usually be needed.

Download or read book Structural Defects Reference Manual for Low Rise Buildings written by Michael F. Atkinson and published by CRC Press. This book was released on 2014-04-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Structural Defects Reference Manual for Low-Rise Buildings has been written to assist professionals and students involved in building construction to identify causes of structural failure. Each chapter carefully addresses design, materials and workmanship factors which contribute to structural defects. The main structural elements - roofs, walls, floors and foundations - are all covered and illustrated by case studies. The book also contains relevant data and guidance to show how all the different building elements should be designed and constructed.

Download or read book Structural Foundations Manual for Low Rise Buildings written by Michael Atkinson and published by CRC Press. This book was released on 2020-11-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical and buildable solutions for the design of foundations for housing and other low-rise buildings, especially those on abnormal or poor ground. A wealth of expert information and advice is brought together dealing with the key aspects a designer must consider in order to achieve effective and economic foundation designs. This second edition of Structural Foundations Manual for Low-Rise Buildings has been completely updated in line with the new government guidelines on contaminated land and brown-field sites. The book includes well-detailed design solutions and calculations, actual case histories, illustrations, design charts and check lists, making it a user-friendly reference for contractors, structural engineers, architects and students who have to deal with foundations for low-rise buildings on sites with difficult ground conditions.

Download or read book The Building Regulations written by M. J. Billington and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since publication of the first edition in 1976, The Building Regulations: Explained and Illustrated has provided a detailed, authoritative, highly illustrated and accessible guide to the regulations that must be adhered to when constructing, altering or extending a building in England and Wales. This latest edition has been fully revised throughout. Much of the content has been completely rewritten to cover the substantial changes to the Regulations since publication of the 13th edition, to ensure it continues to provide the detailed guidance needed by all those concerned with building work, including architects, building control officers, Approved Inspectors, Competent Persons, building surveyors, engineers, contractors and students in the relevant disciplines.

Download or read book Fundamental Building Technology written by Andrew J. Charlett and published by Routledge. This book was released on 2013-01-25 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Building Technology introduces the technology, methods, and processes fundamental to construction by focussing on what is involved in building a typical low-rise house. Written with the novice in mind, this textbook is the ideal starting point for any construction student, as it fully supports the reader all the way to understanding the functional requirements of each element of the building, and how to take these into account through the building process itself. This second edition is expanded to cover even more relevant topics, and is supported by more resources for use by the student and lecturer. Now included are: An introduction to the planning process and the building regulations How to incorporate a sustainable approach, in the selection of materials and elsewhere A companion site with lecturer’s answers manual and illustrated lecture notes 150 labelled diagrams throughout the book, and multiple self-study questions in every chapter A students’ section of the companion site with multiple choice quizzes and 250 full-colour photos linked to chapters of the book Concise, focussed and the most student-friendly guide to this topic available, Fundamental Building Technology is the perfect textbook for those taking construction technology modules at undergraduate or HNC/HND level.

Download or read book Structural Foundation Designers Manual written by W. G. Curtin and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual for civil and structural engineers aims to simplify as much as possible a complex subject which is often treated too theoretically, by explaining in a practical way how to provide uncomplicated, buildable and economical foundations. It explains simply, clearly and with numerous worked examples how economic foundation design is achieved. It deals with both straightforward and difficult sites, following the process through site investigation, foundation selection and, finally, design. The book: includes chapters on many aspects of foundation engineering that most other books avoid including filled and contaminated sites mining and other man-made conditions features a step-by-step procedure for the design of lightweight and flexible rafts, to fill the gap in guidance in this much neglected, yet extremely economical foundation solution concentrates on foundations for building structures rather than the larger civil engineering foundations includes many innovative and economic solutions developed and used by the authors’ practice but not often covered in other publications provides an extensive series of appendices as a valuable reference source. For the Second Edition the chapter on contaminated and derelict sites has been updated to take account of the latest guidelines on the subject, including BS 10175. Elsewhere, throughout the book, references have been updated to take account of the latest technical publications and relevant British Standards.

Download or read book Soil Mechanics written by Graham Barnes and published by Bloomsbury Publishing. This book was released on 2017-09-16 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fourth edition, this popular textbook provides students with a clear understanding of the nature of soil and its behaviour, offering an insight into the application of principles to engineering solutions. It clearly relates theory to practice using a wide-range of case studies, and dozens of worked examples to show students how to tackle specific problems. A comprehensive companion website offers worked solutions to the exercises in the book, video interviews with practising engineers and a lecturer testbank. With its comprehensive coverage and accessible writing style, this book is ideal for students of all levels on courses in geotechnical engineering, civil engineering, highway engineering, environmental engineering and environmental management, and is also a handy guide for practitioners. New to this Edition: - Brand-new case studies from around the world, demonstrating real-life situations and solutions - Over 100 worked examples, giving an insight into how engineers tackle specific problems - A companion website providing an integrated series of video interviews with practising engineers - An extensive online testbank of questions for lecturers to use alongside the book

Download or read book Guide to Defect Avoidance written by Hapm Publications Ltd. and published by CRC Press. This book was released on 2001-03-15 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing together in a unique and practical way much tried-and-tested information, the Guide to Defect Avoidance is essential reading for busy designers and contractors, those engaged in the investigation of building failures, and anyone involved in the procurement and management of low-rise housing of predominantly traditional construction. Using full colour illustrations, the Guide lists and describes a wide range of construction defects, selected and rated by Construction Audit Ltd. on the basis of a decade of experience gained in auditing the construction of over 4,000 newbuild housing schemes. Each defect is clearly related to its potential consequences before being presented in the context of a `problem' and how it may be avoided. Common mistakes are highlighted and the reader directed to an extensive range of further reading.

Download or read book ICE Manual of Geotechnical Engineering Volume 2 written by Tim Chapman and published by Emerald Group Publishing. This book was released on 2023-11-17 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.

Download or read book Principles of Element Design written by Peter Rich and published by Routledge. This book was released on 2012-10-02 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of buildings is learnt through experience and the inheritance of a tradition in forming buildings over several thousand years. Successful construction learns from this experience which becomes embodied in principles of application. Though materials and techniques change, various elements have to perform the same function. 'Principles of Element Design' identifies all the relevant elements and then breaks these elements down into all their basic constituents, making it possible for students to fully understand the given theory and principles behind each part. As all building projects are subject to guidance through the Building Regulations and British Standards, this book gives an immediate reference back to relevant information to help practitioners and contractors identify key documents needed. Yvonne Dean B.A. (Hons) B.A (Open) RIBA, an architect, energy consultant and materials technologist. She also has 15 years experience as a lecturer, travels widely and is a guest lecturer at many universities. She pioneered an access course for Women into Architecture and Building, which has been used as a template by others, and has been instrumental in helping to change the teaching of technology for architects and designers. Peter Rich AA Dipl. (Hons) Architect, started his career with 14 years experience as a qualified architectural technician. He then joined the AA School of Architecture, working with Bill Allen and John Bickerdike after his graduation, later becoming a partner of Bickerdike Allen Rich and Partners. He also taught building construction at the Bartlett School of Architecture, University College London, and architectural design at the Polytechnic of North London. He now acts as a Consultant.

Download or read book Development of Improved Design Criteria for Low rise Buildings in Developing Countries to Better Resist the Effects of Extreme Winds written by Noel J. Raufaste and published by . This book was released on 1974 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: A 1973 international workshop held in Manila, Philippines, addressed the state-of-the-art in mitigating building damages from winds. The workshop was jointly sponsored by the United States Agency for International Development (USAID), a Philippine advisor.

Download or read book Environmental Geotechnics written by R. W. Sarsby and published by Thomas Telford. This book was released on 2000 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing environmental awareness has emphasized the many engineering situations in which there are potential environmental impacts. This text provides a guide for engineers who are likely to be involved in such situations.

Download or read book Using the Building Regulations written by Mike Billington and published by Routledge. This book was released on 2012-08-21 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Building Regulations and Approved Documents have become more and more complex, they have become increasingly unfriendly for a professional user. Compliance is only possible by understanding a wide range of supporting documentation. Alternative approaches are implied, but not described or analysed. This book examines Approved Document C on Site Preparation and takes the user through all the key stages of preparation, compliance, inspection and enforcement. It offers practical advice on using not just the traditional routes to compliance but also on the alternative approaches suggested but not explained in the Approved Documents. The advantages and disadvantages of each form of compliance are analysed in depth. Everything you need to know to prepare a site's fixtures against contamination and moisture is discussed, including floors, walls, window frames, door tresholds, and roofs. This is an indispensable text for professional designers, architects, structural and other specialist engineers, building control officers and students in construction, building and architecture.

Download or read book Building Regulations Explained written by London District Surveyors Association and published by Routledge. This book was released on 2013-08-06 with total page 1908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all buildings erected or altered in England and Wales must satisfy the requirements of the building regulations. This essential reference has been revised in line with new legislation up to January 2004, including important revisions to Parts B, E, H, J, L1, L2, and M and an outline of the proposed Part P. Each chapter explains in clear terms the appropriate regulation and any other legislation, before explaining the approved document. The Appeals and Determinations have been repositioned at the end of each chapter. Publications lists and relevant sources of information are also included, together with annexes devoted to legislation relevant to the construction industry, determinations made by the Secretary of State, and sample check lists. This highly illustrated and practical approach to the subject makes this the indispensable, one-stop reference guide for professionals and students.

Download or read book Using the Building Regulations written by Michael J. Billington and published by Routledge. This book was released on 2007 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Building Regulations and Approved Documents have become more and more complex, they have become increasingly unfriendly for a professional user. Compliance is only possible by understanding a wide range of supporting documentation. Alternative approaches are implied, but not described or analysed. This book examines Approved Document C on Site Preparation and takes the user through all the key stages of preparation, compliance, inspection and enforcement. It offers practical advice on using not just the traditional routes to compliance but also on the alternative approaches suggested but not explained in the Approved Documents. The advantages and disadvantages of each form of compliance are analysed in depth. Everything you need to know to prepare a site's fixtures against contamination and moisture is discussed, including floors, walls, window frames, door tresholds, and roofs. This is an indispensable text for professional designers, architects, structural and other specialist engineers, building control officers and students in construction, building and architecture.