Download or read book Low Energy Electron Diffraction written by Michel A. VanHove and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface crystallography plays the same fundamental role in surface science which bulk crystallography has played so successfully in solid-state physics and chemistry. The atomic-scale structure is one of the most important aspects in the understanding of the behavior of surfaces in such widely diverse fields as heterogeneous catalysis, microelectronics, adhesion, lubrication, cor rosion, coatings, and solid-solid and solid-liquid interfaces. Low-Energy Electron Diffraction or LEED has become the prime tech nique used to determine atomic locations at surfaces. On one hand, LEED has yielded the most numerous and complete structural results to date (almost 200 structures), while on the other, LEED has been regarded as the "technique to beat" by a variety of other surface crystallographic methods, such as photoemission, SEXAFS, ion scattering and atomic diffraction. Although these other approaches have had impressive successes, LEED has remained the most productive technique and has shown the most versatility of application: from adsorbed rare gases, to reconstructed surfaces of sem iconductors and metals, to molecules adsorbed on metals. However, these statements should not be viewed as excessively dogmatic since all surface sensitive techniques retain untapped potentials that will undoubtedly be explored and exploited. Moreover, surface science remains a multi-technique endeavor. In particular, LEED never has been and never will be self sufficient. LEED has evolved considerably and, in fact, has reached a watershed.
Download or read book Modern Techniques of Surface Science written by D. P. Woodruff and published by Cambridge University Press. This book was released on 1994-03-03 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded second edition of the standard work on new techniques for studying solid surfaces.
Download or read book The Structure of Rare earth Metal Surfaces written by Stephen David Barrett and published by World Scientific. This book was released on 2001 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Structure of Rare-Earth Metal Surfaces introduces the concepts of surface crystallography and surface-structure determination, outlines the principles of the most widely used experimental techniques and theoretical simulations, and reviews their application to the surfaces of rare-earth metals. In particular, the results of quantitative low-energy electron-diffraction experiments and multiple-scattering calculations are covered in some depth. The book is aimed at science graduates with an interest in surface crystallography. Contents: Introduction to the Rare Earths; The Basics of Surface Structure; Surface Structure Techniques; Crystal Growth and Surface Preparation; Rare-Earth Surface Science; Quantitative Low-Energy Electron Diffraction; Quantitative LEED Results; Summary OCo Past, Present and Future. Readership: Researchers in surface and interface science, crystallography, condensed matter physics and computational physics."
Download or read book The Structure of Surfaces II written by Johannes F. van der Veen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Energy Electron Diffraction written by J. B. Pendry and published by . This book was released on 1974 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Structures from Low Energy Electron Diffraction written by Nicholas F. Materer and published by . This book was released on 1995 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Metal and Polymer Surfaces V1 written by Lieng-Huang Lee and published by Elsevier. This book was released on 2012-12-02 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Metal and Polymer Surfaces, Volume 1: Metal Surfaces presents the proceedings of the Symposium on Advances in Characterization of Metal and Polymer Surfaces, held in New York, on April 5–8, 1976. This book provides information pertinent to surface science and discusses the applications of surface analyses to polymer technology. Organized into five parts encompassing 19 chapters, this compilation of papers starts with an overview of the important innovations of surface analyses and discusses the possible applications of each method to polymer technology. This text then explores atom-probe field ion microscopy, which is the most sensitive micro-analytical tool that combines the single atom resolution of a field ion microscope with mass spectrometric single ion identification. Other chapters discuss the application of Mössbauer spectroscopy as a technique for studying corrosion phenomena. The final chapter deals with the capabilities and limitations of the method of inelastic electron tunnelling. This book is a valuable resource for analytical and polymer chemists.
Download or read book Surface Microscopy with Low Energy Electrons written by Ernst Bauer and published by Springer. This book was released on 2014-07-10 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written by a pioneer in surface physics and thin film research and the inventor of Low Energy Electron Microscopy (LEEM), Spin-Polarized Low Energy Electron Microscopy (SPLEEM) and Spectroscopic Photo Emission and Low Energy Electron Microscopy (SPELEEM), covers these and other techniques for the imaging of surfaces with low energy (slow) electrons. These techniques also include Photoemission Electron Microscopy (PEEM), X-ray Photoemission Electron Microscopy (XPEEM), and their combination with microdiffraction and microspectroscopy, all of which use cathode lenses and slow electrons. Of particular interest are the fundamentals and applications of LEEM, PEEM, and XPEEM because of their widespread use. Numerous illustrations illuminate the fundamental aspects of the electron optics, the experimental setup, and particularly the application results with these instruments. Surface Microscopy with Low Energy Electrons will give the reader a unified picture of the imaging, diffraction, and spectroscopy methods that are possible using low energy electron microscopes.
Download or read book Electron Spectroscopy for Surface Analysis written by H. Ibach and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of surface physics and surface chemistry as a science is closely related to the technical development of a number of methods involving electrons either as an excitation source or as an emitted particle carrying characteristic information. Many of these various kinds of electron spectroscopies have become commercially available and have made their way into industrial laboratories. Others are still in an early stage, but may become of increasing importance in the future. In this book an assessment of the various merits and possible drawbacks of the most frequently used electron spectroscopies is attempted. Emphasis is put on prac tical examples and experimental design rather than on theoretical considerations. The book addresses itself to the reader who wishes to know which electron spectroscopy or which combination of different electron spectroscopies he may choose for the particular problems under investigation. After a brief introduction the practical design of electron spectrometers and their figures of merit important for the different applications are discussed in Chapter 2. Chapter 3 deals with electron excited electron spectroscopies which are used for the elemental analysis of surfaces. Structure analysis by electron diffrac tion is described in Chapter 4 with special emphasis on the use of electron diffrac tion for the investigation of surface imperfections. For the application of electron diffraction to surface crystallography in general, the reader is referred to Volume 4 of "Topics in Applied Physics".
Download or read book Characterization of Minerals Metals and Materials 2018 written by Bowen Li and published by Springer. This book was released on 2018-01-17 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition, topics as varied as structural steels to electronic materials to plant-based composites are explored. The latest research presented in this wide area make this book both timely and relevant to the materials science field as a whole. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials. Topics covered include ferrous materials, non-ferrous materials, minerals, ceramics, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others.
Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.
Download or read book Principles of Colloid and Surface Chemistry Revised and Expanded written by Paul C. Hiemenz and published by CRC Press. This book was released on 2016-10-04 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work aims to familiarize students with the fundamentals of colloid and surface science, from various types of colloids and colloidal phenomena, and classical and modern characterization/measurement techniques to applications of colloids and surface science in engineering, technology, chemistry, physics and biological and medical sciences. The Journal of Textile Studies proclaims "High praise from peers . . .contains valuable information on many topics of interest to food rheologists and polymer scientists ...[The book] should be in the libraries of academic and industrial food research organizations" and Chromatographia describes the book as "...an excellent textbook, excellently organised, clearly written and well laid out."
Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.
Download or read book Reflection High Energy Electron Diffraction written by Ayahiko Ichimiya and published by Cambridge University Press. This book was released on 2004-12-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Surface Crystallography written by L. J. Clarke and published by John Wiley & Sons. This book was released on 1985 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low Energy Electron Diffraction (LEED) is one of the most commonly used techniques for crystal surface characterization at the atomic level. This book is designed to provide all the essential background information necessary to carry out surface crystallography using LEED.
Download or read book Recent Advances in Analytical Spectroscopy written by Keiichiro Fuwa and published by Elsevier. This book was released on 2016-07-29 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Analytical Spectroscopy covers the joint meeting of the Ninth International Conference on Atomic Spectroscopy and the 22nd Colloquium Spectroscopicum Internationale, held at the New Otani Hotel and Sophia University, Tokyo, Japan, on September4-8, 1981. The joint meeting features 446 including 74 invited lectures and 39 poster sessions. This book is divided into 26 chapters, which reflect the analytical spectroscopic topics covered in 20 sessions, including plasma emission spectrometry, DC arc, spark and other emission spectrometry, and hydride generation technique for atomic spectrometry. Other chapters deal with furnace atomic absorption spectrometry, Zeeman atomic absorption spectrometry, atomic spectrometric detection systems for separation analysis, atomic fluorescence and scattering spectroscopy, flame atomic absorption spectrometry, spectroscopy for chemical state analysis, spectroscopy for surface and interface analysis. The remaining chapters discuss the application of computers in analytical spectroscopy, developments in laser spectroscopy, application to life science, environmental and geochemical applications, X-ray analysis, UV-VIS spectroscopy, IR and Raman spectroscopy, magnetic resonance spectroscopy, mass spectrometry, and photoacoustic spectrometry. This book will be of value to analytical chemists and related scientists and researchers.
Download or read book Basic Surfaces and their Analysis written by Lyudmila V Goncharova and published by Morgan & Claypool Publishers. This book was released on 2018-07-06 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the basics of surface science. The Nobel Prize winner Wolfgang Pauli's statement, 'God made solids, but surfaces were the work of the devil!' emphasizes the diabolic nature of surfaces. Surfaces are the external border of materials to the external worlds, thus by exploring surfaces one can investigate the material. In the last few decades new and exciting surface properties have been explored in nanomaterials, low-dimensional structures in electronic and photonic devices and other numerous applications.
