Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.

Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.

Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy

Download or read book Industrial Polymer Applications written by William R. Ashcroft and published by Royal Society of Chemistry. This book was released on 2017 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: A supplementary text covering the use of polymers in the modification, protection, repair, restoration and bonding of the main classes of industrial engineering materials.

Download or read book Journal of Protective Coatings Linings written by and published by . This book was released on 1993-12 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Performance written by and published by . This book was released on 1999-07 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion written by Lawrence J. Korb and published by ASM International(OH). This book was released on 1987 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are 27 articles, containing over 600 tables and 2,400 illustrations on specific metals and alloys. You'll find details on the effects of alloying additions and heat treatment on corrosion resistance, plus data on protective coatings, anodic/cathodic protection and design considerations. Seven major sections: Fundamentals of Corrosion Forms of Corrosion Corrosion Testing and Evaluation Designing to Minimize Corrosion Corrosion Protection Methods Corrosion of Specific Alloy Systems Corrosion in Specific Industries and Environments.

Download or read book Hazardous Materials Accident Report written by and published by . This book was released on 197? with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Handbook Corrosion written by ASM International. Handbook Committee and published by . This book was released on 1978 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion written by Stephen D. Cramer and published by . This book was released on 2003 with total page 1190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book in a two-volume revision of the 1987 Metals Handbook, 9th edition, addresses the needs of the global technical community for current information. Chapters on fundamentals cover the theory of aqueous and gaseous corrosion from thermodynamic and kinetic perspectives, while chapters on forms of corrosion tell how to recognize different types and the forces that influence them. Testing and evaluation methods are addressed as are methods of protection and topics related to redesigning for corrosion control and prevention. A section on tools for the corrosionist provides conventions and definitions, information sources and databases, and information on analytical instruments. The editors are affiliated with the Albany Research Center, US Department of Energy. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).

Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Annual Book of ASTM Standards written by American Society for Testing and Materials and published by . This book was released on 2007 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Abstracts written by and published by . This book was released on 1976 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.

Download or read book Essentials of Coating Painting and Lining for the Oil Gas and Petrochemical Industries written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2015-01-06 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the oil and gas industry facing new challenges—deeper offshore installations, more unconventional oil and gas transporting through pipelines, and refinery equipment processing these opportunity feedstocks--new corrosion challenges are appearing, and the oil and gas industry's infrastructure is only as good as the quality of protection provided and maintained. Essentials of Coating, Painting, and Linings for the Oil, Gas, and Petrochemical Industries is the first guide of its kind to directly deliver the necessary information to prevent and control corrosion for the components on the offshore rig, pipelines underground and petrochemical equipment. Written as a companion to Cathodic Corrosion Protection Systems, this must-have training tool supplies the oil and gas engineer, inspector and manager with the full picture of corrosion prevention methods specifically catered for oil and gas services. Packed with real world case studies, critical qualifications, inspection criteria, suggested procedure tests, and application methods, Essentials of Coating, Painting, and Linings for the Oil, Gas and Petrochemical Industries is a required straightforward reference for any oil and gas engineer and manager. - Understand how to select, prime and apply the right coating system for various oil and gas equipment and pipelines – both upstream and downstream - Train personnel with listed requirements, evaluation material and preparation guides, including important environmental compliance considerations - Improve the quality of your equipment, refinery and pipeline with information on repair and rejection principles

Download or read book Thermally Sprayed Metal Coatings to Protect Steel Pilings written by James A. Ellor and published by Transportation Research Board. This book was released on 2004 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Research sponsored by the American Association of State Highway and Transportation Officials in cooperation with the Federal Highway Administration."

Download or read book Handbook of Hot dip Galvanization written by Peter Maaß and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-dip galvanization is a method for coating steel workpieces with a protective zinc film to enhance the corrosion resistance and to improve the mechanical material properties. Hot-dip galvanized steel is the material of choice underlying many modern buildings and constructions, such as train stations, bridges and metal domes. Based on the successful German version, this edition has been adapted to include international standards, regulations and best practices. The book systematically covers all steps in hot-dip galvanization: surface pre-treatment, process and systems technology, environmental issues, and quality management. As a result, the reader finds the fundamentals as well as the most important aspects of process technology and technical equipment, alongside contributions on workpiece requirements for optimal galvanization results and methods for applying additional protective coatings to the galvanized pieces. With over 200 illustrated examples, step-by-step instructions, presentations and reference tables, this is essential reading for apprentices and professionals alike.