Download or read book Kentucky s Timber Industry An Assessment of Timber Product Output and Use 2007 written by Rhonda M. Mathison and published by . This book was released on 2009 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kentucky s Timber Industry An Assessment of Timber Product Output and Use 2007 written by Mathison and published by CreateSpace. This book was released on 2015-02-14 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains the findings of a 2007 canvass of all primary wood-using plants in Kentucky, and presents changes in product output and residue use since 2005. It complements the Forest Inventory and Analysis periodic inventory of volume and removals from the State's timberland. The canvass was conducted to determine the amount and source of wood receipts and annual timber product drain, by county, in 2007 and to determine interstate and cross-regional movement of industrial roundwood. Only primary wood-using mills were canvassed. Primary mills are those that process roundwood in log or bolt form or as chipped roundwood. Examples of industrial roundwood products are saw logs, pulpwood, veneer logs, poles, and logs used for composite board products. Mills producing products from residues generated at primary and secondary processors were not canvassed. Trees chipped in the woods were included in the estimate of timber drain only if they were delivered to a primary domestic manufacturer.

Download or read book Kentucky s Timber Industry An Assessment of Timber Product Output and Use 2009 written by Cooper and published by CreateSpace. This book was released on 2015-02-14 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains the findings of a 2009 canvass of all primary wood-using plants in Kentucky, and presents changes in product output and residue use since 2007. It complements the Forest Inventory and Analysis annual inventory of volume and removals from the State's timberland. The canvass was conducted to determine the amount and source of wood receipts and annual timber product drain, by county, in 2009 and to determine interstate and cross-regional movement of industrial roundwood. Only primary wood-using mills were canvassed. Primary mills are those that process roundwood in log or bolt form or as chipped roundwood. Examples of industrial roundwood products are saw logs, pulpwood, veneer logs, poles, and logs used for composite board products.

Download or read book Kentucky s timber industry an assessment of timber product output and use 1997 written by and published by DIANE Publishing. This book was released on with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kentucky s Timber Industry written by James W. Bentley and published by . This book was released on 2004 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tennessee s Timber Industry An Assessment of Timber Product Output and Use 2007 written by Rhonda M. Mathison and published by . This book was released on 2009 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kentucky s Timber Industry written by Tony G. Johnson and published by . This book was released on 2002 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tennessee s Timber Industry An Assessment of Timber Product Output and Use 2007 written by Rhonda Mathison and published by CreateSpace. This book was released on 2015-02-14 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Forest Inventory and Analysis (FIA) Research Work Unit of the USDA Forest Service developed the Timber Product Output (TPO) Database Retrieval System to help customers answer questions about timber harvesting and use in the Southern Region. This system acts as an interface to a standard set of consistently coded TPO data for each State and county in the region and Nation. This regional and national set of TPO data consists of 11 variables that describe for each county the roundwood products harvested, logging residues left in the woods, other timber removals (i.e. land clearing and reserved timber removals), and wood and bark residues generated by the county's primary wood-using mills. The system is available through the FIA Web site: http: //srsfia2.fs.fed.us/

Download or read book Kentucky s Timber Industry written by James W. Bentley and published by . This book was released on 2006 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kentucky s Timber Industry written by Jason A. Cooper and published by . This book was released on 2011 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The South s Timber Industry written by Tony G. Johnson and published by . This book was released on 2006 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2003, industrial roundwood output from the Souths forests totaled 8.2 billion cubic feet, 6 percent less than in 1999. Mill byproducts generated from primary manufacturers increased 1 percent to 3.2 billion cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Saw logs were the leading roundwood product at 3.7 billion cubic feet; pulpwood ranked second at 3.3 billion cubic feet; veneer logs were third at 830 million cubic feet. The number of primary processing plants declined from 2,551 in 1999 to 2,281 in 2003. Total receipts declined 5 percent to 8.3 billion cubic feet.

Download or read book Kentucky s Timber Industry written by James W. Bentley and published by . This book was released on 2007 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2005, roundwood output from Kentucky's forests totaled 191 million cubic feet, 3 percent more than in 2003. Mill byproducts generated from primary manufacturers increased 2 percent to 91 million cubic feet. Ninety-six percent of plant residues were used, primarily for fuel, miscellaneous, and fiber products. Saw logs were the leading roundwood product at 143 million cubic feet; pulpwood ranked a distant second at 25 million cubic feet; composite panels were third at 14 million cubic feet. The number of primary processing plants declined from 297 in 2003 to 292 in 2005. Total receipts increased 2 percent to 214 million cubic feet.

Download or read book Kentucky s Timber Industry written by Tony G. Johnson and published by . This book was released on 1997 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kentucky s Timber Industry an Assessment of Timber Product Output and Use 1999 written by Tony G. Johnson and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Michigan Timber Industry written by Ronald J. Piva and published by . This book was released on 2010 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Resource Bulletin SRS written by and published by . This book was released on 2008 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The South s Timber Industry An Assessment of Timber Product Output and Use 2007 written by Johnson and published by CreateSpace. This book was released on 2015-02-14 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Forest Inventory and Analysis (FIA) Research Work Unit of the USDA Forest Service developed the Timber Product Output (TPO) Database Retrieval System to help customers answer questions about timber harvesting and use in the Southern Region. This system acts as an interface to a standard set of consistently coded TPO data for each State and county in the region and Nation. This regional and national set of TPO data consists of 11 variables that describe for each county the roundwood products harvested, logging residues left in the woods, other timber removals (i.e. land clearing and reserved timber removals), and wood and bark residues generated by the county's primary wood-using mills. The system is available through the FIA Web site: http: //srsfia2 fs fed.us/