Download or read book GB 8898 2011 Translated English of Chinese Standard GB8898 2011 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-03-14 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard applies to electronic apparatus designed to be powered from grid power supply, from power supply equipment, from battery or from remote power system and intended for reception, generation, recording or reproduction of audio, video and relevant signals. It also applies to apparatus designed to be used exclusively in combination with the above-mentioned apparatus. This Standard primarily applies to the apparatus intended for household and similar general use but which may also be used in places of public locations such as schools, theatres, places of worship and the workplace. PROFESSIONAL APPARATUS intended for use as described above is also covered unless it is specifically within the scope of other standards. This Standard only applies to safety aspects of the above apparatus; it does not apply to other matters, such as style or performance. If above apparatus is designed to be connected to TELECOMMUNICATION NETWORK or similar network, for example by means of an integrated modem, this Standard also applies.
Download or read book Iron Dominated Electromagnets Design Fabrication Assembly And Measurements written by Jack T Tanabe and published by World Scientific Publishing Company. This book was released on 2005-05-06 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book, written by one of the world's foremost specialists in the field, is devoted to the design of low and medium field electromagnets whose field level and quality (uniformity) are dominated by the pole shape and saturation characteristics of the iron yoke.The wide scope covers material ranging from the physical requirements for typical high performance accelerators, through the mathematical relationships which describe the shape of two-dimensional magnetic fields, to the mechanical fabrication, assembly, installation, and alignment of magnets in a typical accelerator lattice. In addition, stored energy concepts are used to develop magnetic force relationships and expressions for magnets with time varying fields.The material in the book is derived from lecture notes used in a course at the Lawrence Livermore National Laboratory and subsequently expanded for the U.S. Particle Accelerator School, making this text an invaluable reference for students planning to enter the field of high energy physics.Mathematical relationships tying together magnet design and measurement theory are derived from first principles, and chapters are included that describe mechanical design, fabrication, installation, and alignment. Some fabrication and assembly practices are reviewed to ensure personnel and equipment safety and operational reliability of electromagnets and their power supply systems. This additional coverage makes the book an important resource for those already in the particle accelerator business as well as those requiring the design and fabrication of low and medium field level magnets for charged particle beam transport in ion implantation and medical applications.
Download or read book Gear Motor Handbook written by Bonfiglioli Riduttori S.p.A. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: In these years of constant growth and further development for our company, research and development has become more and more important, and has allowed us to be at the forefront in our business sector, where innovation is the obvious and decisive factor. It has therefore been consistent with our everyday business philosophy to involve ourselves deeply in writing and printing this handbook, which is designed to recognize the capacity and hard work of all employees working successfully in the Bonfiglioli Group. The book is intended to be a concrete contribution by Bonfiglioli Riduttori S.p.A. to the development and application of power transmissions. The book is addressed to all who have technical dealings with power transmissions, from university students to engineers active in the workplace. For this reason we have invited the cooperation of four prestigious professionals - Darle W. Dudley, Jacques Sprengers, Dierk SchrOder, and Hajime Yamashina - in the knowledge that only through the cooperation of the leading specialists in the field of power transmissions could we develop a truly useful and helpful handbook. It has been hard work, but we are sure the reader's appreciation will amply reward our efforts.
Download or read book Department of Defense Dictionary of Military and Associated Terms written by United States. Joint Chiefs of Staff and published by . This book was released on 1979 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Design written by P.R.N. Childs and published by Elsevier. This book was released on 2003-12-04 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the subject of total design, and introduces the design and selection of various common mechanical engineering components and machine elements. These provide "building blocks", with which the engineer can practice his or her art. The approach adopted for defining design follows that developed by the SEED (Sharing Experience in Engineering Design) programme where design is viewed as "the total activity necessary to provide a product or process to meet a market need." Within this framework the book concentrates on developing detailed mechanical design skills in the areas of bearings, shafts, gears, seals, belt and chain drives, clutches and brakes, springs and fasteners. Where standard components are available from manufacturers, the steps necessary for their specification and selection are developed. The framework used within the text has been to provide descriptive and illustrative information to introduce principles and individual components and to expose the reader to the detailed methods and calculations necessary to specify and design or select a component. To provide the reader with sufficient information to develop the necessary skills to repeat calculations and selection processes, detailed examples and worked solutions are supplied throughout the text. This book is principally a Year/Level 1 and 2 undergraduate text. Pre-requisite skills include some year one undergraduate mathematics, fluid mechanics and heat transfer, principles of materials, statics and dynamics. However, as the subjects are introduced in a descriptive and illustrative format and as full worked solutions are provided, it is possible for readers without this formal level of education to benefit from this book. The text is specifically aimed at automotive and mechanical engineering degree programmes and would be of value for modules in design, mechanical engineering design, design and manufacture, design studies, automotive power-train and transmission and tribology, as well as modules and project work incorporating a design element requiring knowledge about any of the content described. The aims and objectives described are achieved by a short introductory chapters on total design, mechanical engineering and machine elements followed by ten chapters on machine elements covering: bearings, shafts, gears, seals, chain and belt drives, clutches and brakes, springs, fasteners and miscellaneous mechanisms. Chapters 14 and 15 introduce casings and enclosures and sensors and actuators, key features of most forms of mechanical technology. The subject of tolerancing from a component to a process level is introduced in Chapter 16. The last chapter serves to present an integrated design using the detailed design aspects covered within the book. The design methods where appropriate are developed to national and international standards (e.g. ANSI, ASME, AGMA, BSI, DIN, ISO). The first edition of this text introduced a variety of machine elements as building blocks with which design of mechanical devices can be undertaken. The approach adopted of introducing and explaining the aspects of technology by means of text, photographs, diagrams and step-by-step procedures has been maintained. A number of important machine elements have been included in the new edition, fasteners, springs, sensors and actuators. They are included here. Chapters on total design, the scope of mechanical engineering and machine elements have been completely revised and updated. New chapters are included on casings and enclosures and miscellaneous mechanisms and the final chapter has been rewritten to provide an integrated approach. Multiple worked examples and completed solutions are included.
Download or read book Connections in Steel Structures written by R. Bjorhovde and published by CRC Press. This book was released on 1988-02-19 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the Proceedings of a State-of-the-Art Workshop on Connenctions and the Behaviour, Strength and Design of Steel Structures held at Laboratoire de Mecanique et Technologie, Ecole Normale, Cachan France from 25th to 27th May 1987. It contains the papers presented at the above proceedings and is split into eight main sections covering: Local Analysis of Joints, Mathematical Models, Classification, Frame Analysis, Frame Stability and Simplified Methods, Design Requirements, Data Base Organisation, Research and Development Needs. With papers from 50 international contributors this text will provide essential reading for all those involved with steel structures.
Download or read book Steel Construction Manual written by American Institute of Steel Construction and published by Amer Inst of Steel Construction. This book was released on 2011 with total page 2192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1926 [i.e. 1927] under title: Steel construction; title of 8th ed.: Manual of steel construction.
Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.
Download or read book ISO Metric Screw Threads Specification for Selected Limits of Size written by British Standards Institute Staff and published by . This book was released on 1981-12 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISO metric threads, Thread forms, Threads, Nuts, Bolts, Diameter, Dimensions, Thread pitch, Size, Dimensional tolerances, Aircraft components
Download or read book Mechanical Design Engineering Handbook written by Peter Childs and published by Butterworth-Heinemann. This book was released on 2013-09-02 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Design Engineering Handbook is a straight-talking and forward-thinking reference covering the design, specification, selection, use and integration of machine elements fundamental to a wide range of engineering applications. Develop or refresh your mechanical design skills in the areas of bearings, shafts, gears, seals, belts and chains, clutches and brakes, springs, fasteners, pneumatics and hydraulics, amongst other core mechanical elements, and dip in for principles, data and calculations as needed to inform and evaluate your on-the-job decisions. Covering the full spectrum of common mechanical and machine components that act as building blocks in the design of mechanical devices, Mechanical Design Engineering Handbook also includes worked design scenarios and essential background on design methodology to help you get started with a problem and repeat selection processes with successful results time and time again. This practical handbook will make an ideal shelf reference for those working in mechanical design across a variety of industries and a valuable learning resource for advanced students undertaking engineering design modules and projects as part of broader mechanical, aerospace, automotive and manufacturing programs. - Clear, concise text explains key component technology, with step-by-step procedures, fully worked design scenarios, component images and cross-sectional line drawings all incorporated for ease of understanding - Provides essential data, equations and interactive ancillaries, including calculation spreadsheets, to inform decision making, design evaluation and incorporation of components into overall designs - Design procedures and methods covered include references to national and international standards where appropriate
Download or read book The Standard Handbook for Aeronautical and Astronautical Engineers written by Mark Davies and published by . This book was released on 2003 with total page 1880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a one-stop reference for engineers of all disciplines in aeronautical and aerospace engineering, this handbook seeks to filter mechanical engineering applications to specifically address aircraft and spacecraft science and military engineering.
Download or read book Genesis Of A Music written by Harry Partch and published by Da Capo Press. This book was released on 1979-08-22 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the few truly experimental composers in our cultural history, Harry Partch's life (1901–1974) and music embody most completely the quintessential American rootlessness, isolation, pre-civilized cult of experience, and dichotomy of practical invention and transcendental visions. Having lived mostly in the remote deserts of Arizona and New Mexico with no access to formal training, Partch naturally created theatrical ritualistic works incorporating Indian chants, Japanese kabuki and Noh, Polynesian microtones, Balinese gamelan, Greek tragedy, dance, mime, and sardonic commentary on Hollywood and commercial pop music of modern civilization. First published in 1949, Genesis of a Music is the manifesto of Partch's radical compositional practice and instruments (which owe nothing to the 300-year-old European tradition of Western music.) He contrasts Abstract and Corporeal music, proclaiming the latter as the vital, emotionally tactile form derived from the spoken word (like Greek, Chinese, Arabic, and Indian musics) and surveys the history of world music at length from this perspective. Parts II, III, and IV explain Partch's theories of scales, intonation, and instrument construction with copious acoustical and mathematical documentation. Anyone with a musically creative attitude, whether or not familiar with traditional music theory, will find this book revelatory.
Download or read book Rock Slope Engineering written by Evert Hoek and published by CRC Press. This book was released on 1981-06-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic handbook deals with the geotechnical problems of rock slope design. It has been written for the non-specialist mining or civil engineer, with worked examples, design charts, coverage of more detailed analytical methods, and of the collection and interpretation of geological and groundwater information and tests for the mechanical properties of rock.
Download or read book Advanced Engineering Optimization Through Intelligent Techniques written by R. Venkata Rao and published by Springer. This book was released on 2019-07-09 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed papers presented at the International Conference on Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT) 2018. The book combines contributions from academics and industry professionals, and covers advanced optimization techniques across all major engineering disciplines like mechanical, manufacturing, civil, automobile, electrical, chemical, computer and electronics engineering. Different optimization techniques and algorithms such as genetic algorithm (GA), differential evolution (DE), simulated annealing (SA), particle swarm optimization (PSO), artificial bee colony (ABC) algorithm, artificial immune algorithm (AIA), teaching-learning-based optimization (TLBO) algorithm and many other latest meta-heuristic techniques and their applications are discussed. This book will serve as a valuable reference for students, researchers and practitioners and help them in solving a wide range of optimization problems.
Download or read book Assembly Language Programming for PDP 11 and LSI 11 Computers written by Edouard J. Desautels and published by WCB/McGraw-Hill. This book was released on 1982 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressure Vessel Handbook written by Eugene F. Megyesy and published by . This book was released on 1977 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamental Principles of Heat Transfer written by Stephen Whitaker and published by Elsevier. This book was released on 2013-10-22 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Principles of Heat Transfer introduces the fundamental concepts of heat transfer: conduction, convection, and radiation. It presents theoretical developments and example and design problems and illustrates the practical applications of fundamental principles. The chapters in this book cover various topics such as one-dimensional and transient heat conduction, energy and turbulent transport, forced convection, thermal radiation, and radiant energy exchange. There are example problems and solutions at the end of every chapter dealing with design problems. This book is a valuable introductory course in heat transfer for engineering students.
