Download or read book Irradiation enhanced Creep of Cold worked Zr 2 5Nb Tubes and Helical springs written by A. R. Causey and published by Chalk River, Ont. : Reactor Materials Research Branch, Chalk River Laboratories. This book was released on 1993 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report investigates the anistrophy of irradiation-enhanced creep of cold-worked Zr-2.5Nb at 548-563 K using internally-pressurized capsules and axially loaded helical-springs. The test specimens were machined from small diameter extruded and cold-worked tubing that had crystallographic texture and microstructure similar to that of CANDU power reactor pressure tubes. The biaxial creep capsules and the helical-springs were irradiated for 9,525 and 16,670 hours, respectively, in a fast neutron flux.
Download or read book The Metallurgy of Zirconium written by Benjamin Lustman and published by . This book was released on 2013-05 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributing Authors Include H. Etherington, R. C. Dalzell, D. W. Lillie And Others.
Download or read book Applied Metallurgy and Corrosion Control written by Amiya Kumar Lahiri and published by Springer. This book was released on 2017-08-23 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on metals and materials selection for the petrochemical industrial sector. The petrochemical industry involves large scale investments, and to maintain profitability the plants are to be operated with minimum downtime and failure of equipment, which can also cause safety hazards. To achieve this objective proper selection of materials, corrosion control, and good engineering practices must be followed in both the design and the operation of plants. Engineers and professional of different disciplines involved in these activities are required to have some basic understanding of metallurgy and corrosion. This book is written with the objective of servings as a one-stop shop for these engineering professionals. The book first covers different metallic materials and their properties, metal forming processes, welding, and corrosion and corrosion control measures. This is followed by considerations in material selection and corrosion control in three major industrial sectors, oil & gas production, oil refinery, and fertilizers. The importance of pressure vessel codes as well as inspection and maintenance repair practices have also been highlighted. The book will be useful for technicians and entry level engineers in these industrial sectors. Additionally, the book may also be used as primary or secondary reading for graduate and professional coursework.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Zirconium in Nuclear Applications written by J. H. Schemel and published by ASTM International. This book was released on 1974 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molten Salt Reactor Program Semiannual Progress Report for Period Ending written by Oak Ridge National Laboratory and published by . This book was released on 1965-02 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.
Download or read book Hot Cracking Phenomena in Welds III written by John Lippold and published by Springer Science & Business Media. This book was released on 2011-05-03 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third in a series of compendiums devoted to the subject of weld hot cracking. It contains 22 papers presented at the 3rd International Hot Cracking Workshop in Columbus, Ohio USA in March 2010. In the context of this workshop, the term “hot cracking” refers to elevated temperature cracking associated with either the weld metal or heat-affected zone. These hot cracking phenomena include weld solidification cracking, HAZ and weld metal liquation cracking, and ductility-dip cracking. The book is divided into three major sections based on material type; specifically aluminum alloys, steels, and nickel-base alloys. Each of these sections begins with a keynote paper from prominent researchers in the field: Dr. Sindo Kou from the University of Wisconsin, Dr. Thomas Böllinghaus from BAM and the University of Magdeburg, and Dr. John DuPont from Lehigh University. The papers contained within include the latest insight into the mechanisms associated with hot cracking in these materials and methods to prevent cracking through material selection, process modification, or other means. The three Hot Cracking Phenomena in Welds compendiums combined contain a total of 64 papers and represent the best collection of papers on the topic of hot cracking ever assembled.
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Download or read book Zirconium in the Nuclear Industry written by Gerry D. Moan and published by ASTM International. This book was released on 2002 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The 41 papers of this proceedings volume were first presented at the 13th symposium on Zirconium in the Nuclear Industry held in Annecy, France in June of 2001. Many of the papers are devoted to material related issues, corrosion and hydriding behavior, in-reactor studies, and the behavior and properties of Zr alloys used in storing spent fuel. Some papers report on studies of second phase particles, irradiation creep and growth, and material performance during loss of coolant and reactivity initiated accidents. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Applications related Phenomena in Zirconium and Its Alloys written by and published by . This book was released on 1969 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Working Guide written by Y. V. R. K. Prasad and published by ASM International. This book was released on 1997-01-01 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book Fuel Modelling in Accident Conditions written by International Atomic Energy Agency and published by . This book was released on 2020-02-29 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication summarizes the findings and conclusions of an IAEA coordinated research project (CRP) on fuel modelling in accident conditions, which was initiated under the IAEA Action Plan on Nuclear Safety following the Fukushima accident. The overall aim of the project was to analyse and better understand fuel behavior in accident conditions, with a focus on loss of coolant accidents. In the course of the project the participants used a mixture of data derived from accident simulation experiments, in particular data designed to investigate the fuel behaviour during design basis accident and design extension conditions. They carried out calculations on priority cases selected from a matrix of cases identified at the first research coordination meeting and designed to support their individual priorities. These priority cases were chosen as the best available to help determine which of the many models used in the codes best reflect reality. The CRP provided an ideal platform to compare their code results with others and especially with experimental data, to which they otherwise would not have had access. The achievements made within this CRP fostered new collaborations and enhanced the development and improvement of common models and highlighted differences in the interpretation of some experiments and therefore in the use of the codes ? the so-called user effects.
Download or read book Journal of the Institute of Metals written by Institute of Metals and published by . This book was released on 1928 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for Sept. 1951- include the Bulletin.
Download or read book Brazing written by M. Schwartz and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a comprehensive overview of the technology surrounding the brazing process to allow the inexperienced engineer, student or professional, to utilize fully this technology.
Download or read book Hot Working Guide A Compendium of Processing Maps Second Edition written by Y.V.R.K. Prasad; K.P. Rao; S. Sasidhar and published by ASM International. This book was released on 2015-08-01 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot Working Guide: A Compendium of Processing Maps, Second Edition is a unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book Characteristics of Used CANDU Fuel Relevant to the Canadian Nuclear Fuel Waste Management Program written by K. M. Wasywich and published by Pinawa, Man. : Whiteshell Laboratories. This book was released on 1993-01-01 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
