Download or read book Introduction to Plate and Shell Theory written by Cedric Edward Turner and published by . This book was released on 1965 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plates and Shells written by Ansel C. Ugural and published by CRC Press. This book was released on 2017-10-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noted for its practical, accessible approach to senior and graduate-level engineering mechanics, Plates and Shells: Theory and Analysis is a long-time bestselling text on the subjects of elasticity and stress analysis. Many new examples and applications are included to review and support key foundational concepts. Advanced methods are discussed and analyzed, accompanied by illustrations. Problems are carefully arranged from the basic to the more challenging level. Computer/numerical approaches (Finite Difference, Finite Element, MATLAB) are introduced, and MATLAB code for selected illustrative problems and a case study is included.
Download or read book Thin Plates and Shells written by Eduard Ventsel and published by CRC Press. This book was released on 2001-08-24 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering appli
Download or read book Aging with Spinal Cord Injury written by Gale G. Whiteneck, PhD and published by Demos Medical Publishing. This book was released on 1993 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to integrate the theory, design, and stability analysis of plates and shells in one comprehensive volume. With authoritative accounts of diverse aspects of plates and shells, this volume facilitates the study and design of structures that incorporate both plate and shell components.
Download or read book Thin Plates and Shells written by Eduard Ventsel and published by CRC Press. This book was released on 2001-08-24 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering applications. It includes computer processes for finite difference, finite element, boundary element, and boundary collocation methods as well as other variational and numerical methods. It also contains end-of-chapter examples and problem/solution sets, a catalog of solutions for cylindrical and spherical shells, and tables of the most commonly used plates and shells.
Download or read book Theory and Design of Plate and Shell Structures written by Maan Jawad and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of many structures such as pressure vessels, aircrafts, bridge decks, dome roofs, and missiles is based on the theories of plates and shells. The degree of simplification needed to adopt the theories to the design of various structures depends on the type of structure and the re quired accuracy of the results. Hence, a water storage tank can be satis factorily designed using the membrane shell theory, which disregards all bending moments, whereas the design of a missile casing requires a more precise analysis in order to minimize weight and materials. Similarly, the design of a nozzle-to-cylinder junction in a nuclear reactor may require a sophisticated finite element analysis to prevent fatigue failure while the same junction in an air accumulator in a gas station is designed by simple equations that satisfy equilibrium conditions. Accordingly, this book is written for engineers interested in the theories of plates and shells and their proper application to various structures. The examples given throughout the book subsequent to derivation of various theories are intended to show the engineer the level of analysis required to achieve a safe design with a given degree of accuracy. The book covers three general areas. These are: bending of plates; membrane and bending theories of shells; and buckling of plates and shells. Bending of plates is discussed in five chapters. Chapters 1 and 2 cover rectangular plates with various boundary and loading conditions.
Download or read book Theory of Plates and Shells written by Stephen Timoshenko and published by . This book was released on 2003-01-01 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Analysis of Elastic Plates and Shells Second Edition written by J. N. Reddy and published by CRC Press. This book was released on 1999-02-10 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents a complete treatment of the theory and analysis of elastic plates. It provides detailed coverage of classic and shear deformation plate theories and their solutions by analytical as well as numerical methods for bending, buckling and natural vibrations. Analytical solutions are based on the Navier and Levy solution method, and numerical solutions are based on the Rayleigh-Ritz methods and finite element method. The author address a range of topics, including basic equations of elasticity, virtual work and energy principles, cylindrical bending of plates, rectangular plates and an introduction to the finite element method with applications to plates.
Download or read book Introduction to Plate and Shell Theory written by C. E. Turner (reader in mechanical engineering.) and published by . This book was released on 1965 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shell Theory written by F.I. Niordson and published by Elsevier. This book was released on 2012-12-02 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This account of the theory of plates and shells is written primarily as a textbook for graduate students in mechanical and civil engineering.The unified treatment of shells of arbitrary shape is accomplished by tensor analysis. This useful tool is introduced in the first chapter, and no knowledge of advanced mathematical methods is required. The general theory developed in the first eight chapters is applied in the remaining part to thin elastic plates and shells with special emphasis on engineering methods and engineering applications. A number of detailed examples illustrate the theory.
Download or read book Theories of Plates and Shells written by Reinhold Kienzler and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and shell theories experienced a renaissance in recent years. The potentials of smart materials, the challenges of adaptive structures, the demands of thin-film technologies and more on the one hand and the availability of newly developed mathematical tools, the tremendous increase in computer facilities and the improvement of commercial software packages on the other caused a reanimation of the scientific interest. In the present book the contributions of the participants of the EUROMECH Colloquium 444 "Critical Review of the Theories of Plates and Shells and New Applications" have been collected. The aim was to discuss the common roots of different plate and shell approaches, to review the current state of the art, and to develop future lines of research. Contributions were written by scientists with civil and mechanical engineering as well as mathematical and physical background.
Download or read book Static and Dynamic Analyses of Plates and Shells written by Hou-Cheng Huang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade or so much has been written on the various attempts to produce efficient, accurate and reliable Mindlin plate finite elements. In the late sixties, a degenerated, Mindlin-type, curved shell element was developed and subsequently many improvements in such elements have been made. Reliability and efficiency in use has always been a major objective. Degenerated shell elements have enjoyed widespread popularity despite certain potential defects, including shear and membrane lock ing behaviour and spurious mechanisms. After introducing the basic foundations of Mindlin-type elements, this book describes these defects and also gives the reasons for their occurrence. Furthermore, the author proposes an approach to overcome these defects. A series of linear benchmark tests are proposed to illustrate the performance of the assumed strain element formulations. The formula tions and applications for material non-linearity are also presented. Both isotropic and anisotropic material models are included together with the results for both static and transient dynamic analyses. Two associated programs are fully documented and provided on floppy discs with test examples. Source codes for the two associated programs are provided: one is for static analysis and the other for dynamic analysis, and the programs can be compiled and run on either a mini or mainframe coniputer via a terminal. The author hopes that this book may provide further impetus in the important research area of plate and shell element technology.
Download or read book Plate and Shell Structures written by Maria Radwańska and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and Shell Structures: Selected Analytical and Finite Element Solutions Maria Radwañska, Anna Stankiewicz, Adam Wosatko, Jerzy Pamin Cracow University of Technology, Poland Comprehensively covers the fundamental theory and analytical and numerical solutions for different types of plate and shell structures Plate and Shell Structures: Selected Analytical and Finite Element Solutions not only provides the theoretical formulation of fundamental problems of mechanics of plates and shells, but also several examples of analytical and numerical solutions for different types of shell structures. The book contains advanced aspects related to stability analysis and a brief description of modern finite element formulations for plates and shells, including the discussion of mixed/hybrid models and locking phenomena. Key features: 52 example problems solved and illustrated by more than 200 figures, including 30 plots of finite element simulation results. Contents based on many years of research and teaching the mechanics of plates and shells to students of civil engineering and professional engineers. Provides the basis of an intermediate-level course on computational mechanics of shell structures. The book is essential reading for engineering students, university teachers, practitioners and researchers interested in the mechanics of plates and shells, as well as developers testing new simulation software.
Download or read book Theory of Plates and Shells written by Stephen Timoshenko and published by McGraw-Hill Publishing Company. This book was released on 1959 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Shells and Plates written by Phillip L. Gould and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study ofthree-dimensional continua has been a traditional part of graduate education in solid mechanics for some time. With rational simplifications to the three-dimensional theory of elasticity, the engineering theories of medium-thin plates and of thin shells may be derived and applied to a large class of engi neering structures distinguished by a characteristically small dimension in one direction. Often, these theories are developed somewhat independently due to their distinctive geometrical and load-resistance characteristics. On the other hand, the two systems share a common basis and might be unified under the classification of Surface Structures after the German term Fliichentragwerke. This common basis is fully exploited in this book. A substantial portion of many traditional approaches to this subject has been devoted to constructing classical and approximate solutions to the governing equations of the system in order to proceed with applications. Within the context of analytical, as opposed to numerical, approaches, the limited general ity of many such solutions has been a formidable obstacle to applications involving complex geometry, material properties, and/or loading. It is now relatively routine to obtain computer-based solutions to quite complicated situations. However, the choice of the proper problem to solve through the selection of the mathematical model remains a human rather than a machine task and requires a basis in the theory of the subject.
Download or read book Theory of Plates and Shells written by Christian Mittelstedt and published by Springer Nature. This book was released on 2023-06-18 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis of plates and shells and is divided into four sections. After briefly introducing the basics of elasticity theory and the energy methods of elastostatics in the first section, the second section is devoted to the statics of disk structures. In addition to isotropic disks in Cartesian and polar coordinates, approximation methods and anisotropic disks are also discussed. The following third section deals with plate structures, covering plates in Cartesian and polar coordinates, and also discussing approximation methods and higher-order plate theories. Other chapters in this section discuss plate buckling as well as geometric nonlinear analysis and laminated plates. The fourth and final section of this book is devoted to shells, i.e., curved thin structures, following the common division into membrane theory on the one hand and bending theory on the other hand. This book is intended for students at universities, but also for engineers in practice and researchers in engineering science.
Download or read book Plates and Shells for Smart Structures written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart structures that contain embedded piezoelectric patches are loaded by both mechanical and electrical fields. Traditional plate and shell theories were developed to analyze structures subject to mechanical loads. However, these often fail when tasked with the evaluation of both electrical and mechanical fields and loads. In recent years more advanced models have been developed that overcome these limitations. Plates and Shells for Smart Structures offers a complete guide and reference to smart structures under both mechanical and electrical loads, starting with the basic principles and working right up to the most advanced models. It provides an overview of classical plate and shell theories for piezoelectric elasticity and demonstrates their limitations in static and dynamic analysis with a number of example problems. This book also provides both analytical and finite element solutions, thus enabling the reader to compare strong and weak solutions to the problems. Key features: compares a large variety of classical and modern approaches to plates and shells, such as Kirchhoff-Love , Reissner-Mindlin assumptions and higher order, layer-wise and mixed theories introduces theories able to consider electromechanical couplings as well as those that provide appropriate interface continuity conditions for both electrical and mechanical variables considers both static and dynamic analysis accompanied by a companion website hosting dedicated software MUL2 that is used to obtain the numerical solutions in the book, allowing the reader to reproduce the examples given as well as solve problems of their own The models currently used have a wide range of applications in civil, automotive, marine and aerospace engineering. Researchers of smart structures, and structural analysts in industry, will find all they need to know in this concise reference. Graduate and postgraduate students of mechanical, civil and aerospace engineering can also use this book in their studies. www.mul2.com