Download or read book International Workshop Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystals written by International Workshop Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystals. 2000, Rauschenbach and published by . This book was released on 2000 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials written by P. Klimanek and published by Trans Tech Publications Ltd. This book was released on 2002-02-01 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The last few years have witnessed a rapidly growing interest in the explanation and interpretation of the mesoscale microstructures which occur in distorted crystalline objects such as, for instance, conventional plastically deformed metals and alloys, as well as high-performance materials including ultra-fine grained polycrystals, nanocrystals and thin films.
Download or read book Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials written by and published by . This book was released on 2002 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last few years have witnessed a rapidly growing interest in the explanation and interpretation of the mesoscale microstructures which occur in distorted crystalline objects such as, for instance, conventional plastically deformed metals and alloys, as well as high-performance materials including ultra-fine grained polycrystals, nanocrystals and thin films. This book describes experimental and theoretical research on distorted crystalline materials, and the interpretation of local lattice rotations by means of both dislocation and disclination theory. The general aim is to stimulate those scientists working in solid-state physics and materials science to use these theories as new and efficient tools for microstructure modeling, analysis and interpretation.
Download or read book Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystals written by and published by . This book was released on 2000 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials written by Peter Klimanek and published by . This book was released on 2002 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last few years have witnessed a rapidly growing interest in the explanation and interpretation of the mesoscale microstructures which occur in distorted crystalline objects such as, for instance, conventional plastically deformed metals and alloys, as well as high-performance materials including ultra-fine grained polycrystals, nanocrystals and thin films.
Download or read book International Conference on Martensitic Transformations ICOMAT 2008 written by Gregory Olson and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 1617 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the week of June 29 - July 5, 2008, over 300 scientists and engineers from 30 countries spanning five continents converged at the historic La Fonda Hotel in the city of Santa Fe, New Mexico, USA to participate in the 12th International Conference on Martensitic Transformations (ICOMAT-08) to fathom the peculiar world of certain crystalline materials that undergo structural change when cooled or stressed. Many of these materials can restore their original shape when reheated, thus the name "Shape Memory Alloys". In the spirit of Santa Fe, a central theme of ICOMAT-08 was INTEGRATION across many dimensions.
Download or read book Diffusion and Defect Data written by and published by . This book was released on 2002 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Crystallography Proceedings Of The Xix Conference written by Danuta Stroz and published by World Scientific. This book was released on 2004-04-16 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to propagate the newest achievements of applied crystallography among crystallographers, solid state physicists and materials scientists. It presents application of structural studies to materials used in industrial practice rather than those associated with the crystal structure determination only.The proceedings have been selected for coverage in:• Materials Science Citation Index®• Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)• Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)• CC Proceedings — Engineering & Physical Sciences
Download or read book 5th European Mechanics of Materials Conference on Scale Transitions from Atomistics to Continuum Plasticity written by E. van der Giessen and published by . This book was released on 2001 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal de physique written by and published by . This book was released on 2001 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Fundamental Aspects of Dislocation Theory written by John Arthur Simmons and published by . This book was released on 1970 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material processing techniques that employ severe plastic deformation have evolved over the past decade, producing metals, alloys and composites having extraordinary properties. Variants of SPD methods are now capable of creating monolithic materials with submicron and nanocrystalline grain sizes. The resulting novel properties of these materials has led to a growing scientific and commercial interest in them. They offer the promise of bulk nanocrystalline materials for structural; applications, including nanocomposites of lightweight alloys with unprecedented strength. These materials may also enable the use of alternative metal shaping processes, such as high strain rate superplastic forming. Prospective applications for medical, automotive, aerospace and other industries are already under development.
Download or read book Continuum Scale Simulation of Engineering Materials written by Dierk Raabe and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap by presenting our current knowledge and understanding of continuum-based concepts behind computational methods used for microstructure and process simulation of engineering materials above the atomic scale. The volume provides an excellent overview on the different methods, comparing the different methods in terms of their respective particular weaknesses and advantages. This trains readers to identify appropriate approaches to the new challenges that emerge every day in this exciting domain. Divided into three main parts, the first is a basic overview covering fundamental key methods in the field of continuum scale materials simulation. The second one then goes on to look at applications of these methods to the prediction of microstructures, dealing with explicit simulation examples, while the third part discusses example applications in the field of process simulation. By presenting a spectrum of different computational approaches to materials, the book aims to initiate the development of corresponding virtual laboratories in the industry in which these methods are exploited. As such, it addresses graduates and undergraduates, lecturers, materials scientists and engineers, physicists, biologists, chemists, mathematicians, and mechanical engineers.
Download or read book Nematic and Cholesteric Liquid Crystals written by Patrick Oswald and published by CRC Press. This book was released on 2005-02-28 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystals allow us to perform experiments that provide insight into fundamental problems of modern physics, such as phase transitions, frustration, elasticity, hydrodynamics, defects, growth phenomena, and optics (linear and non linear). This excellent volume meets the need for an up-to-date text on liquid crystals.Nematic and Cholesteric Liq
Download or read book The Role of Topology in Materials written by Sanju Gupta and published by . This book was released on 2018 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important advances in the class of topological materials and discusses the topological characterization, modeling and metrology of materials. Further, it addresses currently emerging characterization techniques such as optical and acoustic, vibrational spectroscopy (Brillouin, infrared, Raman), electronic, magnetic, fluorescence correlation imaging, laser lithography, small angle X-ray and neutron scattering and other techniques, including site-selective nanoprobes. The book analyzes the topological aspects to identify and quantify these effects in terms of topology metrics. The topological materials are ubiquitous and range from (i) de novo nanoscale allotropes of carbons in various forms such as nanotubes, nanorings, nanohorns, nanowalls, peapods, graphene, etc. to (ii) metallo-organic frameworks, (iii) helical gold nanotubes, (iv) Möbius conjugated polymers, (v) block co-polymers, (vi) supramolecular assemblies, to (vii) a variety of biological and soft-matter systems, e.g. foams and cellular materials, vesicles of different shapes and genera, biomimetic membranes, and filaments, (viii) topological insulators and topological superconductors, (ix) a variety of Dirac materials including Dirac and Weyl semimetals, as well as (x) knots and network structures. Topological databases and algorithms to model such materials have been also established in this book. In order to understand and properly characterize these important emergent materials, it is necessary to go far beyond the traditional paradigm of microscopic structure-property-function relationships to a paradigm that explicitly incorporates topological aspects from the outset to characterize and/or predict the physical properties and currently untapped functionalities of these advanced materials. Simulation and modeling tools including quantum chemistry, molecular dynamics, 3D visualization and tomography are also indispensable. These concepts have found applications in condensed matter physics, materials science and engineering, physical chemistry and biophysics, and the various topics covered in the book have potential applications in connection with novel synthesis techniques, sensing and catalysis. As such, the book offers a unique resource for graduate students and researchers alike.
Download or read book Metallic Materials with High Structural Efficiency written by Oleg N. Senkov and published by Springer Science & Business Media. This book was released on 2004-06-29 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 1998, Prof. Sergey Firstov invited me to the Frantcevych Institute for Problems of Materials Science (IPMS) in Kyiv, Ukraine to discuss possible collaborations in the area of advanced metals research. During this visit, a strong mutual interest was evident in a broad range of structural metals technologies, and a quick friendship was established. Countless subsequent emails and a reciprocal visit to the U. S Air Force Research Laboratory by Prof. Firstov and a team of scientists from IPMS ensued to discuss and detail a broad collaboration in the area of structural metals. Two years after the initial visit, a major investment by the U. S. Air Force Office of Scientific Research (AFOSR) was established to pursue the technologies defined by these interactions. The annual reviews of the AFOSR Ukrainian Metals Initiative were held in late May, a most beautiful time in Kyiv when the lilacs are in bright display and the air is scented with the smell of falling blossoms from the chestnut trees that line the major streets and many parks. The sunny days and mild evenings provide a welcome break from winter, and on weekend evenings festive crowds spill onto the Khreshchatyk, Kyiv’s downtown boulevard, to listen to street musicians, watch jugglers and comedians, or simply to celebrate with friends. The annual reviews featured long days of intensive discussion of technical progress, followed in the evenings by the warm hospitality of the Ukrainian hosts.
