Download or read book International Conference on Advanced High Strength Sheet Steels for Automotive Applications Proceedings written by Ronald E. Ashburn and published by . This book was released on 2004 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the int'l. conf. on advanced high strength sheet steels for automative applications.

Download or read book Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening ICHSU 2022 written by Yisheng Zhang and published by Springer Nature. This book was released on 2023-04-02 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. The scope of papers is as follows (including but not limited to): Material and process of low temperature hot stamping (heating temperature 750-800°C) Cold stamping technology of advanced high strength steel 1180-1470MPa Technology and application of multi-material forming (mixed forming of carbon fiber composites, steel and aluminum) Laser blanking and defect prevention of advanced high strength steel Process of new coating of high strength steel and prevention of hydrogen embrittlement delayed fracture Research progress of multi-step hot stamping strengthening technology High strength steel/aluminum alloy and light-weight and high performance materials Hot stamping of high-strength steel/high-strength aluminium alloy Stamping and roll forming of high strength steel Cold/hot stamping of tailor-welded blanks Modeling and forming simulation of stamping components Application of advanced high strength steel stamping Material surface condition, friction and lubrication Material coatings, corrosion and corrosion protection Hot stamping Component design and body-in-white Heating and cooling methods and processes Microstructure and phase transition of cold-hot stamping forming material Tooling design and manufacturing Test and evaluation of advanced high strength steel stamping components Laser cutting and welding of advanced high strength steel stamping components Digital and intelligent technology and application of hot stamping forming equipment Lightweight design and advanced high strength steel components forming technology for commercial vehicles Other advanced forming technologies

Download or read book Advanced High Strength Steels written by Mahmoud Y. Demeri and published by ASM International. This book was released on 2013-08-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.

Download or read book Advanced High Strength Sheet Steels written by Nina Fonstein and published by Springer. This book was released on 2015-11-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers all types of advanced high strength steels ranging from dual-phase, TRIP. Complex phase, martensitic, TWIP steels to third generation steels, including promising candidates as carbide free bainitic steels, med Mn and Quenching & Partitioning processed steels. The author presents fundamentals of physical metallurgy of key features of structure and relationship of structure constituents with mechanical properties as well as basics of processing AHSS starting from most important features of intercritical heat treatment, with focus on critical phase transformations and influence of alloying and microalloying. This book intends to summarize the existing knowledge to show how it can be utilized for optimization and adaption of steel composition, processing, and for additional improvement of steel properties that should be recommended to engineering personal of steel designers, producers and end users of AHSS as well as to students of colleges and Universities who deal with materials for auto industry.

Download or read book International Conference on New Developments in Advanced High Strength Sheet Steels written by Association for Iron & Steel Technology and published by . This book was released on 2008 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book HSLA Steels 2015 Microalloying 2015 Offshore Engineering Steels 2015 written by The Chinese Society for Metals and published by Springer. This book was released on 2017-03-22 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the joint conference of the 7th International Conference on High Strength Low Alloy Steels (HSLA Steels 2015), the International Conference on Microalloying 2015 (Microalloying 2015), and the International Conference on Offshore Engineering Steels 2015 (OES 2015). The papers focus on the exchange of the latest scientific and technological progresses on HSLA steels, microalloying steels, and offshore engineering steels over the past decades. The contributions are intended to strengthen cooperation between universities and research institutes, and iron and steel companies and users, and promote the further development in the fields all over the world.

Download or read book Advanced High Strength Steel And Press Hardening Proceedings Of The 3rd International Conference On Advanced High Strength Steel And Press Hardening Ichsu2016 written by Yisheng Zhang and published by World Scientific. This book was released on 2017-03-03 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together seventy seven selected papers presented at the 3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2016), which was held in Xi’an, China, during August 25-27, 2016.In this rapid growing market in advanced high strength steel and press hardening, in particularly demand from automotive industry and sustainability community to develop light-weight materials for Body in white or BIW, has motivated us to organize ICHSU2016, soon after the successful conclusion of our ICHSU2015 last year to encourage experts all over the world to get together again to exchange note and ideas as how to move the R&D in press hardening technology forward in the new era.The purpose of holding ICHSU2016 is to satisfy the increasingly urgent requirement of reducing the weight of vehicle structures and increasing passenger safety. This conference arouses great interests and attentions from domestic and foreign researchers in hot stamping field, of the articles accepted, covering almost all the current topics of advanced high strength steel and press hardening technology, which includes materials & testing, modeling & simulation, process design, tribology & tools, equipment and product properties.

Download or read book Advanced Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. This book covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.

Download or read book Advanced High Strength Steel And Press Hardening Proceedings Of The 4th International Conference On Advanced High Strength Steel And Press Hardening Ichsu2018 written by Ma Mingtu and published by World Scientific. This book was released on 2018-12-14 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry requirements for vehicle weight reduction, weight containment, improved part functionality and passenger safety have resulted in the increased use of steel grades with a fully martensitic microstructure. These steel grades are essential to improve the anti-intrusion resistance of automotive body parts and the related passenger safety during car collisions. Standard advanced high strength steel (AHSS) grades are notoriously difficult to be formed by cold stamping; they are characterized by elastic springback, poor stretch flangeability and low hole expansion ratios. Hot stamping has therefore received much attention recently as an alternative technology to produce AHSS automotive parts.In this book, selected articles from the Fourth International Conference on Advanced High Strength Steel and Press Hardening held on August 20-22th, 2018 in Hefei, China, are compiled. It focuses on AHSS for the development of press hardening of high performance sheet metal for lightweight vehicle, advanced digital manufacturing technology, as well as the physical metallurgy principles of the hot stamping process.Aiming at the process design and industrial application for hot stamping of press hardened steel and high strength aluminium alloy sheet, the effect of temperature and strain rate on the formability and mechanical properties of the products is discussed. In addition, more practical cases are provided concerning accurate modelling and multi-physics coupling simulation of the hot stamping process. Furthermore, the influence of tool design on forming process, more precise process control strategies to increase production efficiency, and the improvement of hot stamping equipment by advanced design methods will also be presented.

Download or read book Proceedings of the 6th International Conference on Recrystallization and Grain Growth ReX GG 2016 written by Elizabeth Holm and published by Springer. This book was released on 2016-11-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents a cross-section of the papers presented at the 6th International Conference on Recrystallization and Grain Growth. The volume is divided into nine sections: • Grain growth theory and simulation • Recrystallization theory and simulation • Low carbon and IF steels • High strength steels • Electrical steels • Stainless steels • Aluminum and magnesium alloys • Nickel and nickel based superalloys • Unconventional and advanced materials

Download or read book Proceedings of the Symposium on High Strength Sheet Steels for the Automotive Industry written by Symposium on High Strength Sheet Steels for the Au and published by . This book was released on 1994-01-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 14th International Conference on the Technology of Plasticity Current Trends in the Technology of Plasticity written by Katia Mocellin and published by Springer Nature. This book was released on 2023-08-19 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of metal forming, as presented by leading international researchers and engineers at the 14th International Conference on Technology of Plasticity (ICTP), held in Mandelieu-La Napoule, France on September 24-29, 2023. It covers a diverse range of topics such as manufacturing processes & equipment, materials behavior and characterization, microstructure design by forming, surfaces & interfaces, control & optimization, green / sustainable metal forming technologies, digitalization & AI in metal forming, multi-material processing, agile / flexible metal forming processes, forming of non-metallic materials, micro-forming and luxury applications. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.

Download or read book Advanced High Strength Steel and Press Hardening written by Yisheng Zhang and published by World Scientific Publishing Company. This book was released on 2018 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry requirements for vehicle weight reduction, weight containment, improved part functionality and passenger safety have resulted in the increased use of steel grades with a fully martensitic microstructure. These steel grades are essential to improve the anti-intrusion resistance of automotive body parts and the related passenger safety during car collisions. Standard advanced high strength steel (AHSS) grades are notoriously difficult to be formed by cold stamping; they are characterized by elastic springback, poor stretch flangeability and low hole expansion ratios. Hot stamping has therefore received much attention recently as an alternative technology to produce AHSS automotive parts. In this book, selected articles from the Fourth International Conference on Advanced High Strength Steel and Press Hardening held on August 20-22th, 2018 in Hefei, China, are compiled. It focuses on AHSS for the development of press hardening of high performance sheet metal for lightweight vehicle, advanced digital manufacturing technology, as well as the physical metallurgy principles of the hot stamping process. Aiming at the process design and industrial application for hot stamping of press hardened steel and high strength aluminium alloy sheet, the effect of temperature and strain rate on the formability and mechanical properties of the products is discussed. In addition, more practical cases are provided concerning accurate modelling and multi-physics coupling simulation of the hot stamping process. Furthermore, the influence of tool design on forming process, more precise process control strategies to increase production efficiency, and the improvement of hot stamping equipment by advanced design methods will also be presented.

Download or read book High Performance Ferrous Alloys written by Radhakanta Rana and published by Springer Nature. This book was released on 2020-12-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current state of understanding of emerging iron alloys and high-alloy ferrous systems, in comparison with some conventional steels, is compiled in this single volume to further their development. While most of the conventional steels are produced routinely today, many advanced high strength steels and iron-based alloys are still in the laboratory stage. The iron-based emerging alloys can yield high levels of mechanical and physical properties due to their new alloy concepts and novel microstructures leading to multiple benefits of their use in terms of sustainability and environmental impact. This book contains introductory chapters that present the requisite background knowledge on thermodynamics, phase diagrams, and processing routes used for the ferrous alloys to enable the readers a smooth understanding of the main chapters. Then, an overview of the conventional microalloyed steels and advanced high strength steels is given to present the benchmark of the existing steels and ferrous alloys manifesting their current state-of-the-art in terms of physical metallurgy and engineering applications. Subsequent chapters detail novel, emerging ferrous alloys and high-alloy ferrous systems. Summarizes the state-of-the-art of emerging iron-based alloys and the new processing and physical metallurgy-related developments of high-alloy iron systems; Explores new iron-based systems driven by the need for new properties, enhanced performance, sustainable processes and educed environmental impact; Compiles cutting-edge research on the progress of materials science of iron-based systems, from physical metallurgy to engineering applications, and possible avenues for future research.

Download or read book Proceedings of the Symposium on High Strength Sheet Steels for the Automotive Industry written by and published by . This book was released on 1994 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Steels written by Radhakanta Rana and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Steels: Design, Metallurgy, Processing and Applications explores the design, processing, metallurgy, and applications of automotive steels. While some sheet steels are produced routinely in high volume today, there have been significant advances in the use of steel in the automotive industry. This book presents these metallurgical and application aspects in a way that is not available in the current literature. The editors have assembled an international team of experts who discuss recent developments and future prospects for automotive steels, compiling essential reading for both academic and industrial metallurgists, automotive design engineers, and postgraduate students attending courses on the metallurgy of automotive materials. - Presents recent developments on the design, metallurgy, processing, and applications of automotive steels - Discusses automotive steels that are currently in the early stages of research, such as low-density and high modulus steels that are driving future development - Covers traditional steels, advanced high strength steels, elevated Mn steels and ferrous composite materials

Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.