Download or read book Integrating Safeguards and Security with Safety Into Design written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a need to minimize security risks, proliferation hazards, and safety risks in the design of new nuclear facilities in a global environment of nuclear power expansion, while improving the synergy of major design features and raising operational efficiency. In 2008, the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) launched the Next Generation Safeguards Initiative (NGSI) covering many safeguards areas. One of these, launched by NNSA with support of the DOE Office of Nuclear Energy, was a multi-laboratory project, led by the Idaho National Laboratory (INL), to develop safeguards by design. The proposed Safeguards-by-Design (SBD) process has been developed as a structured approach to ensure the timely, efficient, and cost effective integration of international safeguards and other nonproliferation barriers with national material control and accountability, physical security, and safety objectives into the overall design process for the nuclear facility lifecycle. A graded, iterative process was developed to integrate these areas throughout the project phases. It identified activities, deliverables, interfaces, and hold points covering both domestic regulatory requirements and international safeguards using the DOE regulatory environment as exemplar to provide a framework and guidance for project management and integration of safety with security during design. Further work, reported in this paper, created a generalized SBD process which could also be employed within the licensed nuclear industry and internationally for design of new facilities. Several tools for integrating safeguards, safety, and security into design are discussed here. SBD appears complementary to the EFCOG TROSSI process for security and safety integration created in 2006, which focuses on standardized upgrades to enable existing DOE facilities to meet a more severe design basis threat. A collaborative approach is suggested.
Download or read book Safeguard By Design Lessons Learned from DOE Experience Integrating Safety Into Design written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper identifies the lessons to be learned for the institutionalization of Safeguards by Design (SBD) from the Department of Energy (DOE) experience developing and implementing DOE-STD-1189-2008, Integration of Safety into the Design Process. The experience is valuable because of the similarity of the challenges of integrating safety and safeguards into the design process. The paper reviews the content and development of DOE-STD-1189-2008 from its initial concept in January 2006 to its issuance in March 2008. Lessons learned are identified in the areas of the development and structure of requirements for the SBD process; the target audience for SBD requirements and guidance, the need for a graded approach to SBD, and a possible strategy for development and implementation of SBD within DOE.
Download or read book Safeguards by Design written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2008, the "20/20 Vision for the Future" background report by the IAEA Director General identified the possibility of integrating certain activities related to safeguards, safety, and security. Later in the year, the independent Commission report prepared at the request of the IAEA Director General noted that the Agency's roles in nuclear safeguards, safety, and security (3S) complement and can mutually reinforce each other. Safeguards-by-design (SBD) is a practical measure that strengthens 3S integration, especially for the stage of nuclear facility design and construction, but also with ramifications for other stages of the facility life-cycle. This paper describes the SBD concept, with examples for diverse regulatory environments, being developed in the U.S under the U.S. Department of Energy (DOE) Next Generation Safeguards Initiative and the Advanced Fuel Cycle Initiative. This is compared with related international SBD work performed in the recent IAEA workshop on "Facility Design and Plant Operation Features that Facilitate the Implementation of IAEA Safeguards". Potential future directions for further development of SBD and its integration within 3S are identified.
Download or read book Implementing Safeguards by Design written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk Assessment written by Valentina Svalova and published by IntechOpen. This book was released on 2018-02-28 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk assessment is one of the main parts of complex systematic research of natural and man-made hazards and risks together with the concepts of risk analysis, risk management, acceptable risk, and risk reduction. It is considered as the process of making a recommendation on whether existing risks are acceptable and present risk control measures are adequate, and if they are not, whether alternative risk control measures are justified or will be implemented. Risk assessment incorporates the risk analysis and risk evaluation phases. Risk management is considered as the complete process of risk assessment, risk control, and risk reduction. The book reflects on the state-of-the-art problems and addresses the risk assessment to establish the criteria for ranking risk posed by different types of natural or man-made hazards and disasters, to quantify the impact that hazardous event or process has on population and structures, and to enhance the strategies for risk reduction and avoiding.
Download or read book The International Atomic Energy Agency written by Joseph F. Pilat and published by Routledge. This book was released on 2021-07-19 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a wide-ranging examination and discussion of the International Atomic Energy Agency’s (IAEA) past, present and future as it enters its seventh decade. Including contributions from leading experts across the globe, the book assesses the historical record of the IAEA; the issues and challenges it faces at present; and its future prospects. In doing so, it addresses the primary missions of the IAEA outlined in the IAEA’s statute, i.e., to safeguard and promote the peaceful uses of nuclear energy, as well as the missions over which it is expanding its mandate, including nuclear safety and security. The volume is divided into two parts: Part I focuses on historical recollections and reflections of participants in key events, ranging from a personal account of the initial negotiations of the IAEA to an account by its chairman on the dynamics of the Board of Governors in recent years. Part II covers current and future issues in the IAEA’s role in nuclear safeguards, the peaceful uses of nuclear energy, and nuclear safety and security. This book will be of much interest to students of nuclear proliferation and arms control, global governance and international security in general.
Download or read book Integrating Safety Operations Security and Safeguards ISOSS Into the Design of Small Modular Reactors written by and published by . This book was released on 2013 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The existing regulatory environment for nuclear reactors impacts both the facility design and the cost of operations once the facility is built. Delaying the consideration of regulatory requirements until late in the facility design - or worse, until after construction has begun - can result in costly retrofitting as well as increased operational costs to fulfill safety, security, safeguards, and emergency readiness requirements. Considering the scale and scope, as well as the latest design trends in the next generation of nuclear facilities, there is an opportunity to evaluate the regulatory requirements and optimize the design process for Small Modular Reactors (SMRs), as compared to current Light Water Reactors (LWRs). To this end, Sandia has embarked on an initiative to evaluate the interactions of regulations and operations as an approach to optimizing the design of SMR facilities, supporting operational efficiencies, as well as regulatory requirements. The early stages of this initiative consider two focus areas. The first focus area, reported by LaChance, et al. (2007), identifies the regulatory requirements established for the current fleet of LWR facilities regarding Safety, Security, Operations, Safeguards, and Emergency Planning, and evaluates the technical bases for these requirements. The second focus area, developed in this report, documents the foundations for an innovative approach that supports a design framework for SMR facilities that incorporates the regulatory environment, as well as the continued operation of the facility, into the early design stages, eliminating the need for costly retrofitting and additional operating personnel to fulfill regulatory requirements. The work considers a technique known as Integrated Safety, Operations, Security and Safeguards (ISOSS) (Darby, et al., 2007). In coordination with the best practices of industrial operations, the goal of this effort is to develop a design framework that outlines how ISOSS requirements can be incorporated into the pre-conceptual through early facility design stages, seeking a cost-effective design that meets both operational efficiencies and the regulatory environment. The larger scope of the project, i.e., in future stages, includes the identification of potentially conflicting requirements identified by the ISOSS framework, including an analysis of how regulatory requirements may be changed to account for the intrinsic features of SMRs.
Download or read book Design for Safety written by Louis J. Gullo and published by John Wiley & Sons. This book was released on 2018-02-20 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop reference guide to design for safety principles and applications Design for Safety (DfSa) provides design engineers and engineering managers with a range of tools and techniques for incorporating safety into the design process for complex systems. It explains how to design for maximum safe conditions and minimum risk of accidents. The book covers safety design practices, which will result in improved safety, fewer accidents, and substantial savings in life cycle costs for producers and users. Readers who apply DfSa principles can expect to have a dramatic improvement in the ability to compete in global markets. They will also find a wealth of design practices not covered in typical engineering books—allowing them to think outside the box when developing safety requirements. Design Safety is already a high demand field due to its importance to system design and will be even more vital for engineers in multiple design disciplines as more systems become increasingly complex and liabilities increase. Therefore, risk mitigation methods to design systems with safety features are becoming more important. Designing systems for safety has been a high priority for many safety-critical systems—especially in the aerospace and military industries. However, with the expansion of technological innovations into other market places, industries that had not previously considered safety design requirements are now using the technology in applications. Design for Safety: Covers trending topics and the latest technologies Provides ten paradigms for managing and designing systems for safety and uses them as guiding themes throughout the book Logically defines the parameters and concepts, sets the safety program and requirements, covers basic methodologies, investigates lessons from history, and addresses specialty topics within the topic of Design for Safety (DfSa) Supplements other books in the series on Quality and Reliability Engineering Design for Safety is an ideal book for new and experienced engineers and managers who are involved with design, testing, and maintenance of safety critical applications. It is also helpful for advanced undergraduate and postgraduate students in engineering. Design for Safety is the second in a series of “Design for” books. Design for Reliability was the first in the series with more planned for the future.
Download or read book Enhancing National Safeguards Infrastructure to Support the Introduction of Nuclear Power written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-11-17 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The decision to establish a nuclear power program is a significant undertaking by any country. Such a decision should be based on a commitment by the government to use nuclear power safely, securely and peacefully. This commitment requires establishing a sustainable national infrastructure including robust safeguards infrastructure supporting the functions of the State system of accounting for and control of nuclear material (SSAC). The IAEA has developed the Milestones Approach to help Member States embarking on nuclear power to plan and develop the necessary infrastructure in a phased way. Safeguards is one of the 19 infrastructure issues described in the Milestones Approach. The primary objective of this publication is to provide guidance and references for safeguards related activities that need to be carried out during each of the three phases of nuclear power infrastructure development in line with the nuclear power program implementation. This publication includes several case studies from different countries on how they developed their national safeguards infrastructure to meet the requirements of their nuclear power programs.
Download or read book Framework for Integrating Safety Operations Security and Safeguards in the Design and Operation of Nuclear Facilities written by and published by . This book was released on 2007 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The US is currently on the brink of a nuclear renaissance that will result in near-term construction of new nuclear power plants. In addition, the Department of Energy's (DOE) ambitious new Global Nuclear Energy Partnership (GNEP) program includes facilities for reprocessing spent nuclear fuel and reactors for transmuting safeguards material. The use of nuclear power and material has inherent safety, security, and safeguards (SSS) concerns that can impact the operation of the facilities. Recent concern over terrorist attacks and nuclear proliferation led to an increased emphasis on security and safeguard issues as well as the more traditional safety emphasis. To meet both domestic and international requirements, nuclear facilities include specific SSS measures that are identified and evaluated through the use of detailed analysis techniques. In the past, these individual assessments have not been integrated, which led to inefficient and costly design and operational requirements. This report provides a framework for a new paradigm where safety, operations, security, and safeguards (SOSS) are integrated into the design and operation of a new facility to decrease cost and increase effectiveness. Although the focus of this framework is on new nuclear facilities, most of the concepts could be applied to any new, high-risk facility.
Download or read book Secretary s Annual Report to Congress written by United States. Department of Energy and published by . This book was released on 1981 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Success Through Safety Security and Safeguards by Design 3SBD written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SAFEGUARDS AND SECURITY INTEGRATION WITH SAFETY ANALYSIS written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this paper is to share the Savannah River Site lessons learned on Safeguards and Security (S & S) program integration with K-Area Complex (KAC) safety basis. The KAC Documented Safety Analysis (DSA), is managed by the Washington Savannah River Company (WSRC), and the S & S program, managed by Wackenhut Services, Incorporated--Savannah River Site (WSI-SRS). WSRC and WSI-SRS developed a contractual arrangement to recognize WSI-SRS requirements in the KAC safety analysis. Design Basis Threat 2003 (DBT03) security upgrades required physical modifications and operational changes which included the availability of weapons which could potentially impact the facility safety analysis. The KAC DSA did not previously require explicit linkage to the S & S program to satisfy the safety analysis. WSI-SRS have contractual requirements with the Department of Energy (DOE) which are separate from WSRC contract requirements. The lessons learned will include a discussion on planning, analysis, approval of the controls and implementation issues.
Download or read book The Oxford Handbook of Nuclear Security written by and published by Oxford University Press. This book was released on 2024-05-16 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Oxford Handbook of Nuclear Security provides a comprehensive examination of efforts to secure sensitive nuclear assets and mitigate the risk of nuclear terrorism and other non-state actor threats. It aims to provide the reader with a holistic understanding of nuclear security through exploring its legal, political, and technical dimensions at the international, national, and organizational levels. Recognizing there is no one-size-fits-all approach to nuclear security, the book explores fundamental elements and concepts in practice through a number of case studies which showcase how and why national and organizational approaches have diverged. Although focused on critiquing past and current activities, unexplored yet crucial aspects of nuclear security are also considered, and how gaps in international efforts might be filled. Contributors to the handbook are drawn from a variety of different disciplinary backgrounds and experiences, to provide a wide range of perspectives on nuclear security issues and move beyond the Western narratives that have tended to dominate the debate.These include scholars from both developed and developing nuclear countries, as well as practitioners working in the field of nuclear security in an effort to bridge the gap between theory and practice.
Download or read book Connected e Health written by Sushruta Mishra and published by Springer Nature. This book was released on 2022-05-05 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: With rise of smart medical sensors, cloud computing and the health care technologies, “connected health” is getting remarkable consideration everywhere. Recently, the Internet of Things (IoT) has brought the vision of a smarter world into reality. Cloud computing fits well in this scenario as it can provide high quality of clinical experience. Thus an IoT-cloud convergence can play a vital role in healthcare by offering better insight of heterogeneous healthcare content supporting quality care. It can also support powerful processing and storage facilities of huge data to provide automated decision making. This book aims to report quality research on recent advances towards IoT-Cloud convergence for smart healthcare, more specifically to the state-of-the-art approaches, design, development and innovative use of those convergence methods for providing insights into healthcare service demands. Students, researchers, and medical experts in the field of information technology, medicine, cloud computing, soft computing technologies, IoT and the related fields can benefit from this handbook in handling real-time challenges in healthcare. Current books are limited to focus either on soft computing algorithms or smart healthcare. Integration of smart and cloud computing models in healthcare resulting in connected health is explored in detail in this book.
Download or read book Applicability of IAEA Safety Standards to Non Water Cooled Reactors and Small Modular Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-06-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to an increase in global activities related to non-water-cooled reactors and small modular reactors, this new Safety Report documenting areas of novelty of these technologies when compared to the current fleet of reactors has been developed. The impact of these areas of novelty on the applicability and completeness of the IAEA safety standards is assessed in the publication. Gaps and areas for additional consideration are identified. The review undertaken to develop this report encompassed the safety standards related to the lifetime of these reactor technologies. The publication also considers the interface between safety, security, and safeguards in the design of these technologies.
Download or read book Energy and Water Development Appropriations for 1995 Department of Energy fiscal year 1995 budget justifications written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 1994 with total page 2584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
