Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2005-06-28 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of instrumentation is critical in light of the highly sensitive and precise requirements of modern processes and systems. Rapid development in instrumentation technology coupled with the adoption of new standards makes a firm, up-to-date foundation of knowledge more important than ever in most science and engineering fields. Understanding this, Robert B. Northrop produced the best-selling Introduction to Instrumentation and Measurements in 1997. The second edition continues to provide in-depth coverage of a wide array of modern instrumentation and measurement topics, updated to reflect advances in the field. See What's New in the Second Edition: Anderson Current Loop technology Design of optical polarimeters and their applications Photonic measurements with photomultipliers and channel-plate photon sensors Sensing of gas-phase analytes (electronic "noses") Using the Sagnac effect to measure vehicle angular velocity Micromachined, vibrating mass, and vibrating disk rate gyros Analysis of the Humphrey air jet gyro Micromachined IC accelerometers GPS and modifications made to improve accuracy Substance detection using photons Sections on dithering, delta-sigma ADCs, data acquisition cards, the USB, and virtual instruments and PXI systems Based on Northrop's 40 years of experience, Introduction to Instrumentation and Measurements, Second Edition is unequalled in its depth and breadth of coverage.

Download or read book Measurement and Instrumentation written by Alan S. Morris and published by Academic Press. This book was released on 2011-09-12 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement and Instrumentation introduces undergraduate engineering students to the measurement principles and the range of sensors and instruments that are used for measuring physical variables. Based on Morris's Measurement and Instrumentation Principles, this brand new text has been fully updated with coverage of the latest developments in such measurement technologies as smart sensors, intelligent instruments, microsensors, digital recorders and displays and interfaces. Clearly and comprehensively written, this textbook provides students with the knowledge and tools, including examples in LABVIEW, to design and build measurement systems for virtually any engineering application. The text features chapters on data acquisition and signal processing with LabVIEW from Dr. Reza Langari, Professor of Mechanical Engineering at Texas A&M University. Early coverage of measurement system design provides students with a better framework for understanding the importance of studying measurement and instrumentation Includes significant material on data acquisition, coverage of sampling theory and linkage to acquisition/processing software, providing students with a more modern approach to the subject matter, in line with actual data acquisition and instrumentation techniques now used in industry. Extensive coverage of uncertainty (inaccuracy) aids students' ability to determine the precision of instruments Integrated use of LabVIEW examples and problems enhances students' ability to understand and retain content

Download or read book Instrumentation Reference Book written by Walt Boyes and published by Butterworth-Heinemann. This book was released on 2009-11-25 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discipline of instrumentation has grown appreciably in recent years because of advances in sensor technology and in the interconnectivity of sensors, computers and control systems. This 4e of the Instrumentation Reference Book embraces the equipment and systems used to detect, track and store data related to physical, chemical, electrical, thermal and mechanical properties of materials, systems and operations. While traditionally a key area within mechanical and industrial engineering, understanding this greater and more complex use of sensing and monitoring controls and systems is essential for a wide variety of engineering areas--from manufacturing to chemical processing to aerospace operations to even the everyday automobile. In turn, this has meant that the automation of manufacturing, process industries, and even building and infrastructure construction has been improved dramatically. And now with remote wireless instrumentation, heretofore inaccessible or widely dispersed operations and procedures can be automatically monitored and controlled. This already well-established reference work will reflect these dramatic changes with improved and expanded coverage of the traditional domains of instrumentation as well as the cutting-edge areas of digital integration of complex sensor/control systems. Thoroughly revised, with up-to-date coverage of wireless sensors and systems, as well as nanotechnologies role in the evolution of sensor technology Latest information on new sensor equipment, new measurement standards, and new software for embedded control systems, networking and automated control Three entirely new sections on Controllers, Actuators and Final Control Elements; Manufacturing Execution Systems; and Automation Knowledge Base Up-dated and expanded references and critical standards

Download or read book Surgical Instrumentation eBook written by Renee Nemitz and published by Elsevier Health Sciences. This book was released on 2013-01-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Take your understanding to a whole new level with Pageburst digital books on VitalSource! Easy-to-use, interactive features let you make highlights, share notes, run instant topic searches, and so much more. Best of all, with Pageburst, you get flexible online, offline, and mobile access to all your digital books. With hundreds of detailed, full-color photographs of common surgical instruments, Surgical Instrumentation: An Interactive Approach, 2nd Edition makes it easier to learn the identification, purpose, and set up of instruments for surgical procedures. Many photos include close-up views of the instrument tip, so you can quickly discern differences between instruments. Interactive resources on Evolve let you rotate key instruments 360 degrees for viewing from any angle, zoom in to examine the tip or zoom out to reveal the entire instrument, and also include flash cards, timed memory exercises, Mayo stand set up quizzes, and animations of large and small fragmentation sets. Written for surgical technologists by surgical technology educator Renee Nemitz, this resource offers a level of visual clarity and realism unmatched by any other surgical instrument book! More than 600 full-color, high-quality photographs help you learn the most common surgical instruments for all surgical procedures. Consistent instrument monographs include the name, common name, category, use (type of surgery and where on the body), cautions relating to safety or patient care, and other details such as regional name variations. Student resources on the Evolve companion website include all of the images from the text, additional 360-degree views and close-ups of over 100 instruments, animations of large and small fragment sets, and timed recall exercises for practice in learning instruments. Close-up photos of more than 100 instruments show the details of each tip, demonstrating variations and making it easier to identify each surgical instrument. Presentation of two or fewer illustrations per page makes it easier to see the details of each instrument. Enhanced flash cards and quizzes on the Evolve companion website allow you to review instruments by chapter or to randomize your review with instruments from the entire text. Alternative names are added to the book’s index for easer lookup of instruments whose names have regional variations. Enhanced quizzes on Evolve are available as Practice or Test options, and results may be printed out for submission to instructors.

Download or read book Instrumentation and Control Systems written by William Bolton and published by Elsevier. This book was released on 2004-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a clear and readable style, Bill Bolton addresses the basic principles of modern instrumentation and control systems, including examples of the latest devices, techniques and applications. Unlike the majority of books in this field, only a minimal prior knowledge of mathematical methods is assumed. The book focuses on providing a comprehensive introduction to the subject, with Laplace presented in a simple and easily accessible form, complimented by an outline of the mathematics that would be required to progress to more advanced levels of study. Taking a highly practical approach, Bill Bolton combines underpinning theory with numerous case studies and applications throughout, to enable the reader to apply the content directly to real-world engineering contexts. Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. An introduction to PLCs and ladder programming is incorporated in the text, as well as new information introducing the various software programmes used for simulation. Problems with a full answer section are also included, to aid the reader’s self-assessment and learning, and a companion website (for lecturers only) at http://textbooks.elsevier.com features an Instructor’s Manual including multiple choice questions, further assignments with detailed solutions, as well as additional teaching resources. The overall approach of this book makes it an ideal text for all introductory level undergraduate courses in control engineering and instrumentation. It is fully in line with latest syllabus requirements, and also covers, in full, the requirements of the Instrumentation & Control Principles and Control Systems & Automation units of the new Higher National Engineering syllabus from Edexcel. * Assumes minimal prior mathematical knowledge, creating a highly accessible student-centred text * Problems, case studies and applications included throughout, with a full set of answers at the back of the book, to aid student learning, and place theory in real-world engineering contexts * Free online lecturer resources featuring supporting notes, multiple-choice tests, lecturer handouts and further assignments and solutions

Download or read book Real World Instrumentation with Python written by John M. Hughes and published by "O'Reilly Media, Inc.". This book was released on 2010-11-15 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to develop your own applications to monitor or control instrumentation hardware. Whether you need to acquire data from a device or automate its functions, this practical book shows you how to use Python's rapid development capabilities to build interfaces that include everything from software to wiring. You get step-by-step instructions, clear examples, and hands-on tips for interfacing a PC to a variety of devices. Use the book's hardware survey to identify the interface type for your particular device, and then follow detailed examples to develop an interface with Python and C. Organized by interface type, data processing activities, and user interface implementations, this book is for anyone who works with instrumentation, robotics, data acquisition, or process control. Understand how to define the scope of an application and determine the algorithms necessary, and why it's important Learn how to use industry-standard interfaces such as RS-232, RS-485, and GPIB Create low-level extension modules in C to interface Python with a variety of hardware and test instruments Explore the console, curses, TkInter, and wxPython for graphical and text-based user interfaces Use open source software tools and libraries to reduce costs and avoid implementing functionality from scratch

Download or read book Vital and Health Statistics written by and published by . This book was released on 1963 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electric Motors and Drives written by Austin Hughes and published by Elsevier. This book was released on 2013-10-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for non-specialist users of electric motors and drives, this book explains how electric drives work and compares the performance of the main systems, with many examples of applications. The author's approach - using a minimum of mathematics - has made this book equally popular as an outline for professionals and an introductory student text. * First edition (1990) has sold over 6000 copies. Drives and Controls on the first edition: 'This book is very readable, up-to-date and should be extremely useful to both users and o.e.m. designers. I unhesitatingly recommend it to any busy engineer who needs to make informed judgements about selecting the right drive system.' New features of the second edition: * New section on the cycloconverter drive. * More on switched relectance motor drives. * More on vector-controlled induction motor drives. * More on power switching devices. * New 'question and answer' sections on common problems and misconceptions. * Updating throughout. Electric Motors and Drives is for non-specialist users of electric motors and drives. It fills the gap between specialist textbooks (which are pitched at a level which is too academic for the average user) and the more prosaic 'handbooks' which are filled with useful detail but provide little opportunity for the development of any real insight or understanding. The book explores most of the widely-used modern types of motor and drive, including conventional and brushless d.c., induction motors (mains and inverter-fed), stepping motors, synchronous motors (mains and converter-fed) and reluctance motors.

Download or read book Introduction to Instrumentation in Life Sciences written by Prakash Singh Bisen and published by CRC Press. This book was released on 2012-09-26 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation is central to the study of physiology and genetics in living organisms, especially at the molecular level. Numerous techniques have been developed to address this in various biological disciplines, creating a need to understand the physical principles involved in the operation of research instruments and the parameters required in using them. Introduction to Instrumentation in Life Sciences fills this need by addressing different aspects of tools that hold the keys to cutting-edge research and innovative applications, from basic techniques to advanced instrumentation. The text describes all topics so even beginners can easily understand the theoretical and practical aspects. Comprehensive chapters encompass well-defined methodology that describes the instruments and their corresponding applications in different scientific fields. The book covers optical and electron microscopy; micrometry, especially in microbial taxonomy; pH meters and oxygen electrodes; chromatography for separation and purification of products from complex mixtures; spectroscopic and spectrophotometric techniques to determine structure and function of biomolecules; preparative and analytical centrifugation; electrophoretic techniques; x-ray microanalysis including crystallography; applications of radioactivity, including autoradiography and radioimmunoassays; and fermentation technology and subsequent separation of products of interest. The book is designed to serve a wide range of students and researchers in diversified fields of life sciences: pharmacy, biotechnology, microbiology, biochemistry, and environmental sciences. It introduces different aspects of basic experimental methods and instrumentation. The book is unique in its broad subject coverage, incorporating fundamental techniques as well as applications of modern molecular and proteomic tools that are the basis for state-of-the-art research. The text emphasizes techniques encountered both in practical classes and in high-throughput environments used in modern industry. As a further aid to students, the authors provide well-illustrated diagrams to explain the principles and theories behind the instruments described.

Download or read book Analytical Instrumentation Handbook written by Jack Cazes and published by CRC Press. This book was released on 2004-11-30 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by the editor of Dekker's distinguished Chromatographic Science series, this reader-friendly reference is as a unique and stand-alone guide for anyone requiring clear instruction on the most frequently utilized analytical instrumentation techniques. More than just a catalog of commercially available instruments, the chapters are wri

Download or read book Measurement and Instrumentation written by Alan S Morris and published by Academic Press. This book was released on 2015-08-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement and Instrumentation: Theory and Application, Second Edition, introduces undergraduate engineering students to measurement principles and the range of sensors and instruments used for measuring physical variables. This updated edition provides new coverage of the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces, also featuring chapters on data acquisition and signal processing with LabVIEW from Dr. Reza Langari. Written clearly and comprehensively, this text provides students and recently graduated engineers with the knowledge and tools to design and build measurement systems for virtually any engineering application. Provides early coverage of measurement system design to facilitate a better framework for understanding the importance of studying measurement and instrumentation Covers the latest developments in measurement technologies, including smart sensors, intelligent instruments, microsensors, digital recorders, displays, and interfaces Includes significant material on data acquisition and signal processing with LabVIEW Extensive coverage of measurement uncertainty aids students’ ability to determine the accuracy of instruments and measurement systems

Download or read book Fundamentals of Periodontal Instrumentation and Advanced Root Instrumentation written by Jill Gehrig and published by Lippincott Williams & Wilkins. This book was released on 2018-07-16 with total page 1976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from 3rd Party sellers are not guaranteed by the Publisher for quality, authenticity, or access to any online entitlements included with the product. Walking dental hygiene students step-by-step through the “how to”—not just the “what” and “why”—of using periodontal and root instruments, this 8th Edition of Jill Gehrig’s definitive resource features new chapters, new online technique videos, updated coverage of the latest evidence-based techniques and equipment, and an expanded array of online teaching and learning resources. Designed to make it easy for students to learn instrumentation, this practical book first takes students through basic skills—patient positioning, intraoral finger rests, and basic instrumentation—then covers advanced techniques, including assessment of periodontal patients and instrumentation of the root branches of multirooted teeth, root concavities, and furcation areas. • Stand-alone modules provide step-by-step instructions for each major instrument classification (sickle scalars, universal curets, area-specific curets, etc.), providing instructors with maximum teaching flexibility. • Module outlines make it easy for students to locate specific information. • Chapter-opening learning objectives help students recognize and study important concepts. • A step-by-step format allows students to work independently and at their own pace—fostering autonomy and decision-making skills. • Key terms help students learn a whole new dental vocabulary as they move through the text. • Study aids, including boxes, tables, and flow charts, visually reinforce important content and permit quick reference during technique practice and at-home review. • Case-based patient experiences and critical thinking activities encourage students to apply concepts to clinical situations and help develop problem-solving skills. • Skill evaluation checklists guide student practice, promote self-assessment skills, and provide benchmarks for faculty evaluation of skill attainment. • Thirty-two FREE online videos (12 new to this edition) demonstrate instrumentation techniques.

Download or read book Instrumentation and Process Control written by Terry L.M. Bartelt and published by Cengage Learning. This book was released on 2006-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of components, circuits, instruments, and control techniques used in today's process control technology field. It is ideal for students and technicians who will be installing, troubleshooting, repairing, tuning, and calibrating devices in a process control facility. Following an overview of an industrial control loop, each element of the loop is explored in detail. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Download or read book Meteorological Measurements and Instrumentation written by Giles Harrison and published by John Wiley & Sons. This book was released on 2015-01-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental scientific principles underlying high quality instrumentation used for environmental measurements. It discusses a wide range of in situ sensors employed in practical environmental monitoring and, in particular, those used in surface based measurement systems. It also considers the use of weather balloons to provide a wealth of upper atmosphere data. To illustrate the technologies in use it includes many examples of real atmospheric measurements in typical and unusual circumstances, with a discussion of the electronic signal conditioning, data acquisition considerations and data processing principles necessary for reliable measurements. This also allows the long history of atmospheric measurements to be placed in the context of the requirements of modern climate science, by building the physical science appreciation of the instrumental record and looking forward to new and emerging sensor and recording technologies.

Download or read book Industrial Control Electronics written by Terry L.M. Bartelt and published by Cengage Learning. This book was released on 2012-08-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition continues to provide state-of-the-art coverage of the entire spectrum of industrial control, from servomechanisms to instrumentation. Material on the components, circuits, instruments, and control techniques used in today's industrial automated systems has been fully updated to include new information on thyristors and sensor interfacing and updated information on AC variable speed drives. Following an overview of an industrial control loop, readers may delve into individual sections that explore each element of the loop in detail. This logical format offers the flexibility needed to use the book effectively in a variety of courses, from electric motors to servomechanisms, programmable controllers, and more! Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Download or read book Wiley Survey of Instrumentation and Measurement written by Stephen A. Dyer and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth coverage of instrumentation and measurement from the Wiley Encyclopedia of Electrical and Electronics Engineering The Wiley Survey of Instrumentation and Measurement features 97 articles selected from the Wiley Encyclopedia of Electrical and Electronics Engineering, the one truly indispensable reference for electrical engineers. Together, these articles provide authoritative coverage of the important topic of instrumentation and measurement. This collection also, for the first time, makes this information available to those who do not have access to the full 24-volume encyclopedia. The entire encyclopedia is available online-visit www.interscience.wiley.com/EEEE for more details. Articles are grouped under sections devoted to the major topics in instrumentation and measurement, including: * Sensors and transducers * Signal conditioning * General-purpose instrumentation and measurement * Electrical variables * Electromagnetic variables * Mechanical variables * Time, frequency, and phase * Noise and distortion * Power and energy * Instrumentation for chemistry and physics * Interferometers and spectrometers * Microscopy * Data acquisition and recording * Testing methods The articles collected here provide broad coverage of this important subject and make the Wiley Survey of Instrumentation and Measurement a vital resource for researchers and practitioners alike

Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2018-09-03 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weighing in on the growth of innovative technologies, the adoption of new standards, and the lack of educational development as it relates to current and emerging applications, the third edition of Introduction to Instrumentation and Measurements uses the authors’ 40 years of teaching experience to expound on the theory, science, and art of modern instrumentation and measurements (I&M). What’s New in This Edition: This edition includes material on modern integrated circuit (IC) and photonic sensors, micro-electro-mechanical (MEM) and nano-electro-mechanical (NEM) sensors, chemical and radiation sensors, signal conditioning, noise, data interfaces, and basic digital signal processing (DSP), and upgrades every chapter with the latest advancements. It contains new material on the designs of micro-electro-mechanical (MEMS) sensors, adds two new chapters on wireless instrumentation and microsensors, and incorporates extensive biomedical examples and problems. Containing 13 chapters, this third edition: Describes sensor dynamics, signal conditioning, and data display and storage Focuses on means of conditioning the analog outputs of various sensors Considers noise and coherent interference in measurements in depth Covers the traditional topics of DC null methods of measurement and AC null measurements Examines Wheatstone and Kelvin bridges and potentiometers Explores the major AC bridges used to measure inductance, Q, capacitance, and D Presents a survey of sensor mechanisms Includes a description and analysis of sensors based on the giant magnetoresistive effect (GMR) and the anisotropic magnetoresistive (AMR) effect Provides a detailed analysis of mechanical gyroscopes, clinometers, and accelerometers Contains the classic means of measuring electrical quantities Examines digital interfaces in measurement systems Defines digital signal conditioning in instrumentation Addresses solid-state chemical microsensors and wireless instrumentation Introduces mechanical microsensors (MEMS and NEMS) Details examples of the design of measurement systems Introduction to Instrumentation and Measurements is written with practicing engineers and scientists in mind, and is intended to be used in a classroom course or as a reference. It is assumed that the reader has taken core EE curriculum courses or their equivalents.