Download or read book Handbook of Environment and Waste Management written by Yung-Tse Hung and published by World Scientific. This book was released on 2012 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of topics that are at the forefront of many technical advances and practices in air and water control. These include air pollution control, water pollution control, water treatment, wastewater treatment, industrial waste treatment and small scale wastewater treatment.

Download or read book Waste Materials in Construction written by G.R. Woolley and published by Elsevier. This book was released on 2000-05-12 with total page 1063 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the International Conference on The Science and Engineering of Recycling for Environmental Protection (WASCON 2000), of which a number of themes have been identified. All are inter-related and inter-dependent in so far as potential users of secondary, recovered or recycled material have to be assured that the material is environmentally safe and stable. It is the environmental challenge that forms a leading theme for the conference, and the themes of quality assurance and quality control support this aspect. In terms of use of 'recovered' materials, science and engineering play important and inter-dependent roles and this is reflected in themes which form the very core of the conference. Of no less importance is control of land contamination and how we propose to model for the long term impact of our aims. However dutiful and competent our ideas and studies, there has to be a measure of control and the role of legislation forms the final theme of WASCON 2000.The breadth of studies being undertaken world-wide and the innovative ideas that are expressed in papers submitted are worthy of this important subject. It is also interesting to note that papers were offered from 30 countries, a sign of the increasing awareness of the need to preserve our natural resources and utilize to the full those with which we are more familiar. This book will contribute to the understanding of and solution of environmental problems concerning the re-use of waste materials in construction.

Download or read book Building from Waste written by Dirk E. Hebel and published by Birkhäuser. This book was released on 2014-09-25 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: ”Reduce, Reuse, Recycle, and Recover“ is the sustainable guideline that has replaced the ”Take, Make, Waste“ attitude of the industrial age. Based on their background at the ETH Zurich and the Future Cities Laboratory in Singapore, the authors provide both a conceptual and practical look into materials and products which use waste as a renewable resource. This book introduces an inventory of current projects and building elements, ranging from marketed products, among them façade panels made of straw and self-healing concrete, to advanced research and development like newspaper, wood or jeans denim used as isolating fibres. Going beyond the mere recycling aspect of reused materials, it looks into innovative concepts of how materials usually regarded as waste can be processed into new construction elements. The products are organized along the manufacturing processes: densified, reconfigured, transformed, designed and cultivated materials. A product directory presents all materials and projects in this book according to their functional uses in construction: load-bearing, self-supporting, insulating, waterproofing and finishing products.

Download or read book Recycled Materials for Construction Applications written by Luís Eduardo Pimentel Real and published by Springer Nature. This book was released on 2022-10-27 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art on the topic of recycling of plastic building materials, comprising a synthetic market analysis, and presenting the latest developments in plastic recycling technologies. The book also makes recommendations to optimize the success of recycling and encourage the circular economy, while acknowledging the environmental and sustainability implications of plastic recycling for building construction. The distinctive features of this book are the variety of topics covered on sustainable plastic recycling, the discussion of advances in plastic recycling technology, detailed illustrations, and summarized descriptions of separation processes. This book is a guide for both technical and non-technical readers, and for anyone involved in plastic waste or recycling, including researchers and students in plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials.

Download or read book Waste Materials and By Products in Concrete written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.

Download or read book Cellular Ceramics written by Michael Scheffler and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular ceramics are a specific class of porous materials which includes among others foams, honeycombs, connected fibers, robocast structures and assembled hollow spheres. Because of their particular structure, cellular ceramics display a wide variety of specific properties which make them indispensable for various engineering applications. An increasing number of patents, scientific literature and international conferences devoted to cellular materials testifies to a rapidly growing interest of the technical community in this topic. New applications for cellular ceramics are constantly being put under development. The book, authored by leading experts in this emerging field, gives an overview of the main aspects related to the processing of diverse cellular ceramic structures, methods of structural and properties characterisation and well established industrial, novel and potential applications. It is an introduction to newcomers in this research area and allows students to obtain an in-depth knowledge of basic and practical aspects of this fascinating class of advanced materials.

Download or read book Innovations in Energy Efficient Construction Through Sustainable Materials written by González-Lezcano, Roberto Alonso and published by IGI Global. This book was released on 2024-09-13 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction industry, a cornerstone of modern development, must meet the growing demand for new buildings while minimizing environmental impact. As global populations rise and living standards improve, the need for sustainable building practices has never been more apparent. Traditional construction methods and materials contribute significantly to carbon emissions, resource depletion, and biodiversity loss. Addressing these issues requires innovative solutions that balance development needs with environmental stewardship. Innovations in Energy Efficient Construction Through Sustainable Materials offers a comprehensive response to this pressing problem. The book explores pioneering approaches to building design and construction, focusing on the use of alternative, low-carbon materials and advanced technologies. It provides an in-depth analysis of current and future trends in sustainable construction, covering topics such as recycling waste materials, utilizing biodegradable resources, and implementing energy-efficient designs. By presenting a variety of research fields and practical applications, the book bridges the gap between theoretical concepts and real-world solutions, making it an essential resource for industry professionals, researchers, and advanced students.

Download or read book Recycling and Reusing of Engineering Materials written by Waseem S. Khan and published by Elsevier. This book was released on 2022-06-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling and Reusing of Engineering Materials: Recycling for Sustainable Developments covers the latest research and developments in recycling and reusing processes, including new fundamental concepts, techniques, methods and process flows. The book provides applications of these novel technologies to recycling processes and analyzes new and modern ways of recycling techniques. It provides a comprehensive literature review on fundamental aspects of recycling processes, recycling goals, characterization of waste streams, legislative policies and evaluation, electronic recycling, aircraft recycling, recycling processes, energy savings and issues, environmental issues, societal issues, recycled materials, market development for recycling, processing facilities, and awareness and importance of recycling safety. The book is an indispensable reference for researchers in academia and industry. Scientists can use this book for literature reviews and experimental details, and the industry can use its comprehensive detail for literature reviews and to upgrade their processes and systems. - Provides the latest information on recycling and reusing processes - Includes the results of laboratory experiments from the recycling of electronic waste, recycling of composites, and of aircraft and plastics - Covers radioactive waste treatment and biological waste disposal - Written by a team of authors with teaching and industrial experience

Download or read book Waste To Profit W t P written by Linda Zikhona Linganiso and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of a circular economy in the construction sector captures global material flow through product design, inverse logistics, innovation and collaborations. The circulation of the economy takes into consideration global population influence, which affects the economy through a variety of construction product flows in particular. The increase in consumers means increasing product and services which participate in different waste streams. The emerging sustainable development in the construction industry requires the recycling of waste materials to reduce the negative environmental impact of construction activities. Accumulation and management of construction wastes is also becoming a major environmental and economical concern in many developing countries. Huge volumes of waste generated end up piled on landfill sites or illegally dumped, posing serious health and ecological problems. In the construction industry, recycling of waste concrete, masonry, cement, gypsum, to mention but a few, has become an important aspect due to the continued increase of construction wastes and depletion of natural aggregates. Why not establish a business system that is specifically designed to do much more value addition to the construction wastes and develop products which are not only in demand locally but internationally, to encourage exports for maximum financial gain. This book aims to analyze the current business model in the construction sector and the current legislation concerning waste management. It also highlights efforts required in order to refine the recycling methods in favor of a circular economy in the constuction industry. In support of a transition to a low carbon economy, different types of materials which can be produced from the construction wastes are indicated including processes which are used to obtain the final products. The market demand including penetration of the resulting products are given extensively. Policies and regulations to govern these undertakings are highlighted also. The municipalities will learn to redirect the local construction industries on how to avoid dumping at landfill sites as the space has currently become an issue. Researchers globally will learn how to go up through the Technology Readiness Levels (TRL) from basic research through prototype development and finally up to commercialization in projects related to the construction.

Download or read book Proceedings of the 1st International Conference on Sustainable Waste Management through Design written by Harvinder Singh and published by Springer. This book was released on 2018-10-30 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest advances, innovations and applications in the field of waste management and environmental geomechanics as presented by leading researchers, engineers and practitioners at the International Conference on Sustainable Waste Management through Design (IC_SWMD), held in Ludhiana (Punjab), India on November 2-3, 2018. Providing a unique overview of new directions, and opportunities for sustainable and resilient design approaches to protect infrastructure and the environment, it discusses diverse topics related to civil engineering and construction aspects of the resource management cycle, from the minimization of waste, through the eco-friendly re-use and processing of waste materials, the management and disposal of residual wastes, to water treatments and technologies. It also encompasses strategies for reducing construction waste through better design, improved recovery, re-use, more efficient resource management and the performance of materials recovered from wastes. The contributions were selected by means of a rigorous peer-review process and highlight many exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different waste management specialists.

Download or read book Regeneration of the Built Environment from a Circular Economy Perspective written by Stefano Della Torre and published by Springer Nature. This book was released on 2019-12-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the strategic importance and advantages of adopting multidisciplinary and multiscalar approaches of inquiry and intervention with respect to the built environment, based on principles of sustainability and circular economy strategies. A series of key challenges are considered in depth from a multidisciplinary perspective, spanning engineering, architecture, and regional and urban economics. These challenges include strategies to relaunch socioeconomic development through regenerative processes, the regeneration of urban spaces from the perspective of resilience, the development and deployment of innovative products and processes in the construction sector in order to comply more fully with the principles of sustainability and circularity, and the development of multiscale approaches to enhance the performance of both the existing building stock and new buildings. The book offers a rich selection of conceptual, empirical, methodological, technical, and case study/project-based research. It will be of value for all who have an interest in regeneration of the built environment from a circular economy perspective.

Download or read book Construction and Demolition Waste Management in Australia written by Salman Shooshtarian and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Due to the increase in construction activities worldwide and in Australia, the generation rate of construction and demolition (C&D) waste has significantly grown in recent years. In Australia, construction projects (i.e. housing, buildings and transport infrastructure) are being delivered at an unprecedented rate. Between 2009 and 2019, the annual average growth rate in this industry was 3.33%. The industry is identified as the fourth largest contributor to Australia's growth domestic product (GDP). Unsurprisingly, this quantity of construction brings about a considerable quantity of waste. In 2019, the construction industry generated 27 million tons (or megatonnes) of waste from construction and demolition activities in Australia. Given the size of the construction market and waste generated in this industry, any change will create huge impacts. The adequate management of such a quantity has now become a priority for policymakers around the world. A holistic national approach is required to handle the growing issue of C&D waste management in Australia. Therefore, this book identifies discrepancies and inconsistencies related to C&D waste management in different Australian jurisdictions. The included chapters discuss regulations governing the C&D waste stream, discrepancies in defining waste, Australia's place in the worldwide C&D waste market, opportunities for reducing C&D waste, and the perception among C&D waste stakeholders on relevant issues and proposed reforms, among other topics. Overall, the book contributes to the Australian understanding of effective management of C&D waste by providing a clear picture of C&D waste state of play. The book can benefit policymakers and whoever is interested in C&D waste to better plan for innovative and efficient C&D waste resulting in the further diversion of C&D waste from landfills"--

Download or read book Toxicity of Building Materials written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2012-08-13 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: From long-standing worries regarding the use of lead and asbestos to recent research into carcinogenic issues related to the use of plastics in construction, there is growing concern regarding the potential toxic effects of building materials on health. Toxicity of building materials provides an essential guide to this important problem and its solutions.Beginning with an overview of the material types and potential health hazards presented by building materials, the book goes on to consider key plastic materials. Materials responsible for formaldehyde and volatile organic compound emissions, as well as semi-volatile organic compounds, are then explored in depth, before a review of wood preservatives and mineral fibre-based building materials. Issues related to the use of radioactive materials and materials that release toxic fumes during burning are the focus of subsequent chapters, followed by discussion of the range of heavy metals, materials prone to mould growth, and antimicrobials. Finally, Toxicity of building materials concludes by considering the potential hazards posed by waste based/recycled building materials, and the toxicity of nanoparticles.With its distinguished editors and international team of expert contributors, Toxicity of building materials is an invaluable tool for all civil engineers, materials researchers, scientists and educators working in the field of building materials. - Provides an essential guide to the potential toxic effects of building materials on health - Comprehensively examines materials responsible for formaldehyde and volatile organic compound emissions, as well as semi-volatile organic compounds - Later chapters focus on issues surrounding the use of radioactive materials and materials that release toxic fumes during burning

Download or read book Recycled Aggregates written by Gaurav Saini and published by Nova Science Publishers. This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "With the rapid rise in our needs and requirements, the amount of waste generated by modern cities is also increasing at an unprecedented rate. This problem is global in nature and most countries around the world need appropriate waste management strategies. These measures include disposal and the 3Rs (reduce, reuse, and recycle). Each of these strategies has its own share of pros and cons. An increasing emphasis is being placed on the application of the 3Rs, especially from the environmental perspective. Construction & demolition (C & D) waste is generated when new infrastructure is built and/or older structures are demolished or renovated. Hundreds of millions of tons of such waste are generated worldwide annually, making it one of the most significant waste generating activities in the world. One way to take care of a significant fraction of this waste is as recycled aggregates (RA), wherein the waste is crushed to the dimensions of coarse and fine aggregates and is used for various activities, most notably in manufacturing of concrete. Other uses may include landfilling, manufacturing of tiles, bricks, pavement blocks, etc. Recently, other types of wastes such as used PET bottles have also been studied as a source of recycled aggregates. This book deals with the various socio-economic, technical, environmental, and policy issues related to the application of various types of recycled aggregates in different countries around the world. This is a continually evolving area of applied research which needs further emphasis not only from researchers, but planners and regulators as well"--

Download or read book Recycled Aggregate in Concrete written by Jorge de Brito and published by Springer Science & Business Media. This book was released on 2012-11-28 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is the most used man-made material in the world since its invention. The widespread use of this material has led to continuous developments such as ultra-high strength concrete and self-compacting concrete. Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste focuses on the recent development which the use of various types of recycled waste materials as aggregate in the production of various types of concrete. By drawing together information and data from various fields and sources, Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste provides full coverage of this subject. Divided into two parts, a compilation of varied literature data related to the use of various types of industrial waste as aggregates in concrete is followed by a discussion of the use of construction and demolition waste as aggregate in concrete. The properties of the aggregates and their effect on various concrete properties are presented, and the quantitative procedure to estimate the properties of concrete containing construction and demolition waste as aggregates is explained. Current codes and practices developed in various countries to use construction and demolition waste as aggregates in concrete and issues related to the sustainability of cement and concrete production are also discussed. The comprehensive information presented in Recycled Aggregate in Concrete: Use of Industrial, Construction and Demolition Waste will be helpful to graduate students, researchers and concrete technologists. The collected data will also be an essential reference for practicing engineers who face problems concerning the use of these materials in concrete production.

Download or read book Waste and Byproducts in Cement Based Materials written by Jorge de Brito and published by Woodhead Publishing. This book was released on 2021-06-03 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste and By-Products in Cement-Based Materials: Innovative Sustainable Materials for a Circular Economy covers various recycled materials, by-products and wastes that are suitable for the manufacture of materials within the spectrum of so-called cement-based materials (CBM). Sections cover wastes for replacement of aggregates in CBM, focus on the application of wastes for the replacement of clinker and mineral additions in the manufacture of binders, discuss the optimization process surrounding the manufacture of recycled concrete and mortars, multi-recycling, advanced radiological studies, optimization of self-compacting concrete, rheology properties, corrosion prevention, and more. Final sections includes a review of real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others, as well as a proposal of new regulations to promote the use of waste in the manufacture of CBM. - Favors the institution of the circular economy in the construction industry by eliminating the barriers that currently prevent industrial waste from being valorized by its inclusion in CBM design - Features an in-depth exploration of the strengths and weaknesses of new raw materials and their application to CBMs - Features real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others - Presents current, state-of-the-art, and future-prospects for the use of industrial waste in CBMs

Download or read book The Innovative Use of Materials in Architecture and Landscape Architecture written by Caren Yglesias and published by McFarland. This book was released on 2014-02-21 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about materials. The fundamental properties and technical aspects are reviewed within a context of a material's history, the theories of its meaning and making, and its use. Information about the sustainability aspects of each material is included (as a critical necessity in construction). Innovative design comes from an understanding of materials for what they are, how they have been used in the past, and how they can support human activity. The author provides essential information to students and professionals concerned with advancing their design at a time when the consumption of natural resources and the consequences of wasteful practices are of urgent concern. Instructors considering this book for use in a course may request an examination copy here.