Download or read book Reviews of Infrared and Millimeter Waves written by Kenneth J. Button and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book in the series that is being called The Reviews of Infrared and Millimeter Waves. The series will contain the manuscripts of invited papers from conferences on this subject. This first book contains some of the invited papers from the XXth General Assembly of the Union-Radio-Scientifique Internationale, Washington, August, 1981. We were asked by the URSI Cornmittee to organize a two day symposium on millimeter and submillimeter waves This required the difficult choice of five topics which turned out to be (1) Ultra-low Noise Millimeter Wave Rec ivers (Detectors and Mixers), (2) Free Electron Maser and Gyrotron, (3) Measurements of Power and Noise Power, (4) Complex Dielectric Properties of Solids and Liquids, and (5) Radioastronomy. We have not yet collected all the m . . nuscripts and perhaps we never shall because the tine-. consur. J. ing effort required to prepare a comprehensive review nanuscript works a hardship on research scientists who are already overburdened. 've are particularly grateful, therefore, to the authors lVho have worked so hard to contribute the chapters to this book.The first four chapters contibute to the timely topic of detectors, nixers and re- ceivers. These authors: Tucker, Feldman, Rudner, Okamura, Hogg and their well-known colleagues have been among the leaders in this exciting emerging field for the past few years. The fifth chapter by Sakai and Genzel is the most comprehensive treatment of the metal mesh filter science that can be found in one place.

Download or read book Infrared and Millimeter Waves V8 written by Kenneth J. Button and published by Elsevier. This book was released on 1983-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 8: Electromagnetic Waves in Matter, Part I compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume discusses electromagnetic waves in matter. The first chapter covers the properties of the dielectric materials, which is then followed by a discussion of far-infrared spectroscopy on high polymers. Chapter 3 tackles submillimeter solid-state physics, and Chapter 4 reviews the theory of infrared and far-infrared free-carrier behavior in semiconductors. The improvements in pyroelectric detectors are then reviewed. The sixth chapter discusses cyclotron and Zeeman transitions in photoexcited semiconductors at far infrared, while the seventh chapter discusses high temperature infrared reflectivity spectroscopy. Chapter 8 covers millimeter and submillimeter waves' interaction with giant atoms. The last chapter is about spectroscopy of InAs-GaSb layered structures. This book will be of great use to researchers or professionals whose work involves infrared and millimeter waves.

Download or read book Infrared and Millimeter Waves Vol 9 Millimeter Components written by Kenneth John Button and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Infrared and Millimeter Waves V16 written by Kenneth J. Button and published by Elsevier. This book was released on 2013-09-11 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 16: Electromagnetic Waves in Matter, Part III deals with electromagnetic devices based on infrared and millimeter waves. This book covers infrared optoacoustics; freestanding fine-wire grids for use in millimeter- and submillimeter-wave spectroscopy; and population inversion and far-infrared (FIR) emission of hot electrons in semiconductors. The theory on distributed feedback lasers with weak and strong modulations is also considered. This monograph is comprised of six chapters and begins with a discussion on the optoacoustic effect in the infrared, with emphasis on where optoacoustics and infrared physics combine in the areas of Fourier spectroscopy, optically pumped FIR lasers, and photothermal non-destructive remote material evaluation. The next chapter presents the basic principles of the theory on distributed feedback lasers with weak and strong modulations, together with results of analytical and numerical calculations. The following chapters focus on the construction of freestanding fine-wire grids for use in millimeter- and submillimeter-wave spectroscopy; general equations for the mean distance between impurity ions in solid-state devices, signal vectors in communication theory, and stars in the solar neighborhood; and prospects for hot-carrier systems in active FIR solid-state devices. The final chapter is devoted to quenched germanium and its FIR optical properties. This text will be a valuable resource for physicists and electronics and electrical engineers.

Download or read book Infrared and Millimeter Waves written by Kenneth Button and published by Elsevier. This book was released on 2012-12-02 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 1: Sources of Radiation explores modern sources of radiation available for use in the far-infrared and near-millimeter wavelength range of the spectrum. This book describes the operating principles and comparative performances of all three types of device: electron tubes, solid state devices, and optically pumped lasers. This volume is comprised of seven chapters; the first of which reviews the developments in the design and construction of high-power, high-efficiency millimeter sources and in the nonlinear theory for cyclotron masers. The second chapter deals with IMPATT devices for millimeter-wave power generation, with emphasis on device physics design considerations as well as cw and pulsed operations of IMPATT oscillators and amplifiers at millimeter frequencies. The chapters that follow focus on optically pumped lasers, backward wave oscillators, the Ledatron, and infrared and submillimeter-wave waveguides. This book concludes with a discussion on free electron lasers based on stimulated scattering from relativistic electron beams. An original reformulation of stimulated scattering theory that attempts to encompass all previous treatments is described and compared with available experimental data. This text also presents a semi-qualitative analysis of nonlinear saturation. This book will appeal to scientists and professional engineers.

Download or read book Infrared and Millimeter Waves Vol 4 Millimetersystems written by Kenneth John Button and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Journal of Infrared and Millimeter Waves written by and published by . This book was released on 1994 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Infrared and Millimeter Waves V10 written by Kenneth J. Button and published by Elsevier. This book was released on 1983-01-01 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves V10

Download or read book Infrared and Millimeter Waves V14 written by Kenneth J. Button and published by Elsevier. This book was released on 1985-11-28 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 14: Millimeter Components and Techniques, Part V is concerned with millimeter-wave guided propagation and integrated circuits. In addition to millimeter-wave planar integrated circuits and subsystems, this book covers transducer configurations and integrated-circuit techniques, antenna arrays, optoelectronic devices, and tunable gyrotrons. Millimeter-wave gallium arsenide (GaAs) IMPATT diodes are also discussed. This monograph is comprised of six chapters and begins with a description of millimeter-wave integrated-circuit transducers, focusing on various designs and trade-offs and providing hardware examples. The next chapter deals with millimeter-wave planar integrated circuits based on three transmission media: microstrip lines, suspended strip lines, and fin lines. Various transmission media and substrates are first considered, followed by design considerations and performances of several integrated-circuit components, including mixers, IMPATT oscillators, frequency multipliers, switches, filters, couplers, and ferrite devices. A few selected subsystems are also discussed. The following chapters look at planar millimeter-wave antenna arrays; optoelectronic devices for millimeter waves; and the state of the art in GaAs IMPATT diode technology for both cw and pulsed modes of operation. The final chapter is devoted to the gyrotron or electron cyclotron resonance maser. This text will be a useful resource for physicists and electronics and electrical engineers.

Download or read book Infrared and Millimeter Waves V4 written by Kenneth J. Button and published by Elsevier. This book was released on 2014-04-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves is a series of books that compiles the work of several authors, with each volume focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This book concerns itself with millimeter systems. Comprised of seven chapters, this book discusses several systems that involve the use of millimeter waves, such as radars and missile guidance systems. The first chapter provides a comprehensive overview of millimeter waves, while the succeeding chapter discusses several technologies that involve millimeter systems, such as radar, missile guidance, and imaging systems. This book will be of great use to researchers and professionals whose work involves infrared and millimeter waves.

Download or read book Infrared and Millimeter Waves V11 written by Kenneth J. Button and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Conference on Infrared and Millimeter Waves 8 written by and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Infrared and Millimeter Waves V9 written by Kenneth J. Button and published by Elsevier. This book was released on 1983-01-01 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 9: Millimeter Components and Techniques, Part I compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume deals with millimeter components and techniques. Chapter 1 covers millimeter wave communications, and then the succeeding chapter discusses a comparative study of millimeter waves and transmission lines. This book then tackles dielectric waveguide electrooptic devices, as well as millimeter-wave propagation and remote sensing of the atmosphere, which are covered in Chapter 4. The fifth chapter presents the technology of large radio telescopes for millimeter and submillimeter. The next chapter explains a gyrotron study program, and the last chapter discusses multimode analysis of quasi-optical gyrotrons and gyroklystrons. This book will be of great use for researchers or professionals whose work involves infrared and millimeter waves.

Download or read book Infrared and Millimeter Waves V11 written by Kenneth J. Button and published by Elsevier. This book was released on 1984-12-28 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared and Millimeter Waves, Volume 11: Millimeter Components and Techniques, Part III compiles the work of several authors while focusing on certain aspects of infrared and millimeter waves, such as sources of radiation, instrumentation, and millimeter systems. This volume covers millimeter components and techniques. The first chapter is a review of indium phosphide and gallium arsenide transferred-electron devices, while the next chapter covers nonradiative dielectric waveguide. Chapter 3 discusses groove guide for short millimetric waveguide systems. This book then tackles the application of oversized cavities for millimeter-wave spectroscopy, and Chapter 5 discusses powerful gyrotrons. Chapter 6 covers some perspectives on operating frequency increase in gyrotrons; Chapter 7 covers phase noise and AM noise measurement in the frequency domain. The last chapter discusses the basic design considerations for free-electron lasers driven by electron beams from rf. This book will be of great use to researchers or professionals whose work involves infrared and millimeter waves.

Download or read book Infrared and Millimeter Waves Vol 6 Systems Andcomponents written by Kenneth John Button and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Infrared and Millimeter Waves Vol 5 Coherentsources written by Kenneth John Button and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Optical Constants of Solids Five Volume Set written by Edward D. Palik and published by Elsevier. This book was released on 1997-12-10 with total page 3437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of five volumes, four volumes edited by Edward D. Palik and a volume by Gorachand Ghosh, is a unique resource for any science and technology library. It provides materials researchers and optical device designers with reference facts in a context not available anywhere else. The singular functionality of the set derives from the unique format for the three core volumes that comprise the Handbook of Optical Constants of Solids. The Handbook satisfies several essential needs: first, it affords the most comprehensive database of the refractive index and extinction (or loss) coefficient of technically important and scientifically interesting dielectrics. This data has been critically selected and evaluated by authorities on each material. Second, the dielectric constant database is supplemented by tutorial chapters covering the basics of dielectric theory and reviews of experimental techniques for each wavelength region and material characteristic. As an additional resource, two of the tutorial chapters summarize the relevant characteristics of each of the materials in the database.The data in the core volumes have been collected and analyzed over a period of twelve years, with the most recent completed in 1997. The volumes systematically define the dielectric properties of 143 of the most engaging materials, including metals, semiconductors, and insulators. Together, the three Palik books contain nearly 3,000 pages, with about 2/3 devoted to the dielectric constant data. The tutorial chapters in the remaining 1/3 of the pages contain a wealth of information, including some dielectric data. Hence, the separate volume, Index to Handbook of Optical Constants of Solids, which is included as part of the set, substantially enhances the utility of the Handbook and in essence, joins all the Palik volumes into one unit. It isthen of great importance to users of the set. A final volume rounds out the set. The Handbook of Thermo-Optic Coefficients of Optical Materials with Applications collects refractive index measurements and their temperature dependence for a large number of crystals and glasses. Mathematical models represent these data, and in turn are used in the design of nonlinear optical devices. * Unique source of extremely useful optical data for a very broad community of scientists, researchers, and practitioners* Will be of great practical applicability to both industry and research* Presents optical constants for a broadest spectral range, for a very large number of materials: Paliks three volumes include 143 materials including 43 elements; Ghoshs volume includes some 70 technologically interesting crystals and many commercial glasses* Includes a special index volume that enables the user to search for the information in the three Palik volumes easily and quickly* Critique chapters in the Palik volumes discuss the data and give reference to most of the literature available for each material* Presents various techniques for measuring the optical constants and mathematical models for analytical calculations of some data