Download or read book Inelastic Analysis of Solids and Structures written by M. Kojic and published by Springer Science & Business Media. This book was released on 2005-07-28 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inelastic Analysis of Solids and Structures presents in a unified manner the physical and theoretical background of inelastic material models and computational methods, and illustrates the behavior of the models in typical engineering conditions. The book describes experimental observations and principles of mechanics, and efficient computational algorithms for stress calculations as typically performed in finite element analysis. The theoretical background is given to an extent necessary to describe the commonly employed material models in metal isotropic and orthotropic plasticity, thermoplasticity and viscoplasticity, and the plasticity of geological materials. The computational algorithms are developed in a unified manner with some detailed derivations of the algorithmic relations. Many solved examples are presented, which are designed to give insight into the material behavior in various engineering conditions, and to demonstrate the application of the computational algorithms.
Download or read book Computational Algorithms in Inelastic Analysis of Solids and Structures written by Milos Kojic and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelastic Analysis of Structures under Variable Loads written by Dieter Weichert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The question whether a structure or a machine component can carry the applied loads, and with which margin of safety, or whether it will become unserviceable due to collapse or excessive inelastic deformations, has always been a major concern for civil and mechanical engineers. The development of methods to answer this technologically crucial question without analysing the evolution of the system under varying loads, has a long tradition that can be traced back even to the times of emerging mechanical sciences in the early 17th century. However, the scientific foundations of the theories underlying these methods, nowadays frequently called "direct", were established sporadically in the Thirties of the 20th century and systematically and rigorously in the Fifties. Further motivations for the development of direct analysis techniques in applied mechanics of solids and structures arise from the circumstance that in many engineering situations the external actions fluctuate according to time histories not a priori known except for some essential features, e.g. variation intervals. In such situations the critical events (or "limit states") to consider, besides plastic collapse, are incremental collapse (or "ratchetting") and alternating plastic yielding, namely lack of "shakedown". Non evolutionary, direct methods for ultimate limit state analysis of structures subjected to variably-repeated external actions are the objectives of most papers collected in this book, which also contains a few contributions on related topics.
Download or read book Computational procedures in inelastic analysis of solids and structures written by Miloš Kojić and published by . This book was released on 1997 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelastic Analysis of Structures written by Milan Jirasek and published by John Wiley & Sons. This book was released on 2001-12-21 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hat ein Werkstoff seine Elastizitatsgrenze erreicht, so verhalt er sich inelastisch. Ingenieure und Designer mussen wissen, mit welchen Eigenschaften dann zu rechnen ist. Dieser Band vermittelt Ihnen den aktuellen Wissensstand auf dem Gebiet des plastischen Verhaltens und der plastischen Zug-Spannungs-Beziehungen. Behandelt werden in erster Linie Baustoffe, vor allem Stahl, aber auch Beton und Boden. Eine ausgewogene Mischung aus qualitativer Diskussion und mathematischer Theorie! (05/00)
Download or read book Inelastic Behavior of Materials and Structures Under Monotonic and Cyclic Loading written by Holm Altenbach and published by Springer. This book was released on 2015-02-03 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents studies on the inelastic behavior of materials and structures under monotonic and cyclic loads. It focuses on the description of new effects like purely thermal cycles or cases of non-trivial damages. The various models are based on different approaches and methods and scaling aspects are taken into account. In addition to purely phenomenological models, the book also presents mechanisms-based approaches. It includes contributions written by leading authors from a host of different countries.
Download or read book Elastic And Inelastic Stress Analysis written by Irving H Shames and published by CRC Press. This book was released on 1997-02-01 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting certain key aspects of inelastic solid mechanics centered around viscoelasticity, creep, viscoplasticity, and plasticity, this text is conveniently divided into three parts. The sections focus on the fundamentals of elasticity, useful constitutive laws, and applications to simple structural members. The book provides extended treatment of basic problems in static structural mechanics, including elastic and inelastic effects. It contains worked-out examples and end-of-chapter problems to clarify concepts.
Download or read book Thermomechanics of Solids and Structures written by Marko Canadija and published by Elsevier. This book was released on 2023-04-19 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermomechanics of Solids and Structures: Physical Mechanisms, Continuum Mechanics, and Applications covers kinematics, balance equations, the strict thermodynamic frameworks of thermoelasticity, thermoplasticity, creep covering constitutive equations, the physical mechanisms of deformation, along with computational aspects. The book concludes with coverage of the thermodynamics of solids and applications of the constitutive three-dimensional model to both one-dimensional homogeneous and composite beam structures. Practical applications of the theories and techniques covered are emphasized throughout the book, with analytical solutions provided for various problems. Provides foundational knowledge on continuum mechanics, covering kinematics, balance equations, isothermal elasticity and plasticity, variational principles, and more Presents applications of constitutive 3D models to homogeneous and composite beams, including equations for stress and displacement estimation in thermoelastic beam problems Reviews experimental results of thermoelastic material behavior, along with case studies to support reviews Covers the inelastic behavior of materials at elevated temperatures, with experimental results for both monotonic and cyclic tensile tests presented Looks at the physical mechanisms, experimental results, and constitutive modeling of creep
Download or read book Inelastic Behaviour of Structures under Variable Repeated Loads written by Dieter Weichert and published by Springer. This book was released on 2014-05-04 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the safety assessment of structures and structural components, possibly operating beyond the elastic limits under variable repeated thermo-mechanical loads. Examples of such situations can be found both in mechanical and civil engineering (e.g. transportation technologies, pressure vessels, pipelines, offshore platforms, dams, pavements and buildings in seismic zones). So-called "direct” methods are focused, based on the shakedown theorems and their specialisation to limit theorems. These methods are receiving increased attention for the prediction of structural failure because they provide the information that is essential in practice (e.g. safety factor and collapse mechanisms) by more economical procedures than step-by-step inelastic analysis; also, they only need a minimum of information on the evolution of loads as functions of time. The addressed audience are primarily engineers and scientists active in Structural Engineering and Safety and Reliability Analysis.
Download or read book The Finite Element Method for Solid and Structural Mechanics written by Olek C Zienkiewicz and published by Elsevier. This book was released on 2005-08-09 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the key text and reference for engineers, researchers and senior students dealing with the analysis and modelling of structures – from large civil engineering projects such as dams, to aircraft structures, through to small engineered components. Covering small and large deformation behaviour of solids and structures, it is an essential book for engineers and mathematicians. The new edition is a complete solids and structures text and reference in its own right and forms part of the world-renowned Finite Element Method series by Zienkiewicz and Taylor. New material in this edition includes separate coverage of solid continua and structural theories of rods, plates and shells; extended coverage of plasticity (isotropic and anisotropic); node-to-surface and 'mortar' method treatments; problems involving solids and rigid and pseudo-rigid bodies; and multi-scale modelling. Dedicated coverage of solid and structural mechanics by world-renowned authors, Zienkiewicz and Taylor New material including separate coverage of solid continua and structural theories of rods, plates and shells; extended coverage for small and finite deformation; elastic and inelastic material constitution; contact modelling; problems involving solids, rigid and discrete elements; and multi-scale modelling
Download or read book Modeling High Temperature Materials Behavior for Structural Analysis written by Konstantin Naumenko and published by Springer. This book was released on 2016-05-11 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents approaches to characterize inelastic behavior of materials and structures at high temperature. Starting from experimental observations, it discusses basic features of inelastic phenomena including creep, plasticity, relaxation, low cycle and thermal fatigue. The authors formulate constitutive equations to describe the inelastic response for the given states of stress and microstructure. They introduce evolution equations to capture hardening, recovery, softening, ageing and damage processes. Principles of continuum mechanics and thermodynamics are presented to provide a framework for the modeling materials behavior with the aim of structural analysis of high-temperature engineering components.
Download or read book Nonlinear Finite Element Analysis of Solids and Structures written by René de Borst and published by John Wiley & Sons. This book was released on 2012-07-25 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Built upon the two original books by Mike Crisfield and their own lecture notes, renowned scientist René de Borst and his team offer a thoroughly updated yet condensed edition that retains and builds upon the excellent reputation and appeal amongst students and engineers alike for which Crisfield's first edition is acclaimed. Together with numerous additions and updates, the new authors have retained the core content of the original publication, while bringing an improved focus on new developments and ideas. This edition offers the latest insights in non-linear finite element technology, including non-linear solution strategies, computational plasticity, damage mechanics, time-dependent effects, hyperelasticity and large-strain elasto-plasticity. The authors' integrated and consistent style and unrivalled engineering approach assures this book's unique position within the computational mechanics literature. Key features: Combines the two previous volumes into one heavily revised text with obsolete material removed, an improved layout and updated references and notations Extensive new material on more recent developments in computational mechanics Easily readable, engineering oriented, with no more details in the main text than necessary to understand the concepts. Pseudo-code throughout makes the link between theory and algorithms, and the actual implementation. Accompanied by a website (www.wiley.com/go/deborst) with a Python code, based on the pseudo-code within the book and suitable for solving small-size problems. Non-linear Finite Element Analysis of Solids and Structures, 2nd Edition is an essential reference for practising engineers and researchers that can also be used as a text for undergraduate and graduate students within computational mechanics.
Download or read book Inelastic Behavior of Solids written by Melvin F. Kanninen and published by McGraw-Hill Companies. This book was released on 1970 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Inelastic Analysis written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1987 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lewis Structures Technology 1988 written by and published by . This book was released on 1988 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Modeling of Materials Under Extreme Conditions written by Nicola Bonora and published by Springer. This book was released on 2014-05-09 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents twelve state of the art contributions in the field of numerical modeling of materials subjected to large strain, high strain rates, large pressure and high stress triaxialities, organized into two sections. The first part is focused on high strain rate-high pressures such as those occurring in impact dynamics and shock compression related phenomena, dealing with material response identification, advanced modeling incorporating microstructure and damage, stress waves propagation in solids and structures response under impact. The latter part is focused on large strain-low strain rates applications such as those occurring in technological material processing, dealing with microstructure and texture evolution, material response at elevated temperatures, structural behavior under large strain and multi axial state of stress.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
