Download or read book Inclusions and Their Influence on Material Behavior written by R. Rungta and published by . This book was released on 1988 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A New Approach to Determine the Effect of Nonmetallic Inclusions on Material Behavior in Rolling Contact written by H-J Böhmer and published by . This book was released on 1993 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonmetallic inclusions have an important influence on rolling element bearing behavior. Though this has been well-known for a long time, consideration of nonmetallic inclusions is usually done on the base of empirical results. This paper shows a new approach to describe the influence of inclusions partly analytical on a mechanical base. The notch effect of inclusions due to their mechanical properties in difference to the steel matrix was calculated by finite element method (FEM). The results were used to discuss the material reaction on nonmetallic inclusions in stress fields related with Hertzian contacts. Additionally, residual stresses were considered, and the interaction of both inclusions and residual stresses in rolling contact fatigue is discussed.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Academic Press. This book was released on 2019-06-15 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers looking at factors that cause metals to fail through stress, corrosion, or other processes. Predicting the influence of small defects and non-metallic inclusions on fatigue with any degree of accuracy is a particularly complex part of this. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions is the most trusted, detailed and comprehensive guide to this subject available. This expanded second edition introduces highly important emerging topics on metal fatigue, pointing the way for further research and innovation. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book. Demonstrates how to solve a wide range of specialized metal fatigue problems relating to small defects and non-metallic inclusions. Provides a detailed introduction to fatigue mechanisms and stress concentration. This edition is expanded to address even more topics, including low cycle fatigue, quality control of fatigue components, and more.
Download or read book 7th International Conference on Molten Slags Fluxes Salts written by and published by . This book was released on 2004 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Micromechanics and Inhomogeneity written by G.J. Weng and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Toshio Mura has written extensively on micromechanics over the years, and in part due to his writings and many others in the field, micromechanics has gradually emerged as a recognized discipline in the study of mechanics of materials. The idea is to bring both the mechanics and physics on the micro scopic level to the macroscopic scale, so that the deformation and fracture processes of materials can be better understood. While much apparently remains to be done, this approach has already shed new light on certain selected topics and has proved to be fruitful. It is indeed a happy occasion to celebrate both Toshio's upcoming 65th birthday and the emergence of this young science at the same time. The volume contains thirty-seven original articles on the related topics of micromechanics and inhomogeneity; it is presented to Toshio by his friends, colleagues, and admirers as a wish for his good health and continuing pro ductivity. The contributors belong to both the applied mechanics and the materials communities, all with a common belief that micromechanics is an indispensable area of research. It is hoped that this somewhat balanced structure will make the volume more useful to a wider range of readers, and that in the meantime it will still reflect more or less the spectrum of Toshio's lifelong works. As Editors we have at the outset set the highest possible standards for the book, with a keen anticipation that the volume will be widely circulated for many years to come.
Download or read book Encyclopedia of Materials Metals and Alloys written by and published by Elsevier. This book was released on 2021-09-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern metallurgy is a fascinating field of research, full of discoveries, commercial opportunities and industrial utility. Encyclopedia of Materials: Metals and Alloys is a new, multidisciplinary reference work offering a comprehensive coverage of this exciting area, and consolidating research activities in all experimental and theoretical aspects of metallic materials, intermetallic compounds, alloys, blends and composites. Key focus is on those aspects of the science of metals concerned with their manufacturing, processing and fabrication, the relationship between the macro/micro/nanostructures and properties (mechanical, chemical, electrical, electrochemical, magnetic and optical), industrial application, surface modification and functionalization of metals – and, importantly, resource and supply chain issues, and life-cycle and sustainability practices. This title provides users with a single and unique reference source, incorporating elements from many different disciplines. An invaluable addition to any reference library of engineers, chemists and physicists, both from industry and academia. Comprehensive and accessible - offers users a ‘one stop’ comprehensive resource, providing contemporary reviews of current metallurgy research, and an insight into the future direction of the field Clearly structured - meticulously organized, chapters are split into 13 sections on key topics and clearly cross-referenced to allow students, researchers, and professionals to find relevant information quickly and easily Multidisciplinary - chapters written by academics and practitioners from various fields and regions ensure that the knowledge within is easily understood by, and applicable to, a large audience Contemporary content - emphasis is given to clean energy, green transport, healthcare and next-generation manufacturing
Download or read book Inclusion Nudges Guidebook written by Tinna Nielsen and published by . This book was released on 2016-01-21 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: To promote behavioural change and improve decision making, we must work with the subconscious. Inclusion Nudges target the advantages and shortcomings of our unconscious mind and decision-making processes in order to obtain the desired and needed changes. In this Guidebook, the concept and the three types of Inclusion Nudges are fully explained and illustrated with over 70 practical interventions to promote behaviour, culture, and systems change to mitigate unconscious bias and create more inclusive organisations. The Inclusion Nudges Guidebook is for those who...* Struggle with getting a change to 'stick'.* Want to improve decision making and performance.* Are challenged with translating an ideal goal into behaviors to achieve that goal.* Find it hard to understand what motivates people to make decisions.* Want to get more people engaged in their work. Everyone can learn to design Inclusion Nudges. We believe that if all internal agents of organisational change master these techniques, our actions and behaviours will better leverage the full potential of all people, thereby producing more successful organisations.For this innovative concept and work, the authors, Lisa Kepinski & Tinna C. Nielsen, have been named to The Economist's Global Diversity List as "Top 10 Diversity Consultants" in November 2015.
Download or read book Bearing Steels the Rating of Nonmetallic Inclusion written by and published by ASTM International. This book was released on 1975 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 1996-10-23 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides insight into advanced tool materials, physical theory and research understanding of metal cutting processes. The text highlights technology developed internationally, and reviews available technology of metal cutting processes, such as turning, boring, milling and drilling. It also elucidates optimum choices for tool material and cutting conditions, and more.
Download or read book Non metallic Inclusions in Steel written by Roland Kiessling and published by . This book was released on 1978 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Selection and Design written by Md Abdul Maleque and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents topics on the basics of materials selection and design which will give a better understanding on the selection methods and then find suitable materials for the applications. This book draws the simple and straightforward quantitative methods followed by knowledge-based expert system approach with real and tangible case studies to show how undergraduate or post-graduate students or engineers can apply their knowledge on materials selection and design. Topics discussed in this book contain special features such as illustration, tables and tutorial questions for easy understanding. A few published books or documents are available, hence this book will be very useful for those who use (or want to use) materials selection approach without the advantages of having had comprehensive knowledge or expertise in this materials’ world.
Download or read book Random Heterogeneous Materials written by Salvatore Torquato and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text presents a unified approach of treating the microstructure and effective properties of heterogeneous media. Part I deals with the quantitative characterization of the microstructure of heterogeneous via theoretical methods; Part II treats a wide variety of effective properties of heterogeneous materials and how they are linked to the microstructure, accomplished by using rigorous methods.
Download or read book Advanced Materials for Emerging Applications Innovations Improvements Inclusion and Impact written by T. S. Srivatsan and published by Bentham Science Publishers. This book was released on 2024-05-17 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Materials for Emerging Applications is a monograph on emerging materials'; materials that have observable differences in physical properties and manufacturing requirements when compared to existing materials and industrial processes. The volume aims to showcase novel materials that can be used in advanced technology and innovative products. The editors have compiled 17 chapters grouped into 3 sections: 1) Metals and Alloys, 2) Composite materials, and 3) Other materials. Chapters 1-5 discuss recent advances in friction stir welding, suitability of nickel-base shape memory alloys, thermal cycling studies of nickel-based shape memory alloys, nitrogen additions to stainless steel, and the evolution of zirconium alloy. Chapters 6-11 cover topics such as additive manufacturing of metal matrix composites, composite materials for biomedical applications, aluminum and magnesium metal matrix composites, aluminum nanocomposites for automobile applications, enhancing the strength of aluminum-boron carbide composites, and sisal fibers reinforced composites. Lastly, chapters 13-17 explore smart hydrogels, engineered iron-oxide nanomaterials for magnetic hyperthermia, emerging sustainable material technology for fire safety, recent advances in unconventional machining of smart alloys, and critical parameters influencing high-strain rate deformation of materials. This monograph provides information for a broad readership including material and manufacturing engineers, researchers, students (at undergraduate levels or above) and entrepreneurs interested in manufacturing new products.
Download or read book Corrosion Mechanisms written by Florian B. Mansfeld and published by CRC Press. This book was released on 2020-11-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the mechanisms that have been proposed for the main corrosion phenomena, providing a thorough discussion of the pros and cons of the various corrosion mechanisms with support by experimental and theoretical results.
Download or read book Materials Under Extreme Conditions written by A. K. Tyagi and published by Elsevier. This book was released on 2017-01-13 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Under Extreme Conditions: Recent Trends and Future Prospects analyzes the chemical transformation and decomposition of materials exposed to extreme conditions, such as high temperature, high pressure, hostile chemical environments, high radiation fields, high vacuum, high magnetic and electric fields, wear and abrasion related to chemical bonding, special crystallographic features, and microstructures. The materials covered in this work encompass oxides, non-oxides, alloys and intermetallics, glasses, and carbon-based materials. The book is written for researchers in academia and industry, and technologists in chemical engineering, materials chemistry, chemistry, and condensed matter physics. Describes and analyzes the chemical transformation and decomposition of a wide range of materials exposed to extreme conditions Brings together information currently scattered across the Internet or incoherently dispersed amongst journals and proceedings Presents chapters on phenomena, materials synthesis, and processing, characterization and properties, and applications Written by established researchers in the field
Download or read book Systematics of Fluid Inclusions in Diagenetic Minerals written by Robert Howell Goldstein and published by SEPM (Society for Sedimentary Geology). This book was released on 1994 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
