Download or read book Catalytic In Situ Upgrading of Heavy and Extra Heavy Crude Oils written by Mikhail A. Varfolomeev and published by John Wiley & Sons. This book was released on 2023-06-06 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils A comprehensive guide to a cutting-edge and cost-effective refinement process for heavy oil Oil sufficiently viscous that it cannot flow normally from production wells is called heavy oil and constitutes as much as 70% of global oil reserves. Extracting and refining this oil can pose significant challenges, including very high transportation costs. As a result, processes which produce and partially refine heavy oil in situ, known as catalytic upgrading, are an increasingly important part of the heavy oil extraction process, and the reduced carbon footprint associated with these methods promises to make them even more significant in the coming years. Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils provides a comprehensive introduction to these processes. It introduces the properties and characteristics of heavy and extra-heavy oil before discussing different catalysts and catalyzing processes, their mechanisms and underlying physics, and more. It offers the full sweep of description and analysis required for petroleum and chemical engineers to understand this vital aspect of the modern oil industry. Readers will also find: Detailed discussion of subjects including electron paramagnetic resonance spectroscopy, nuclear magnetic resonance spectroscopy, and more Analysis of both liquid catalysts and nanoparticle catalysts A numerical simulation of the catalytic in-situ oil upgrading process Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils is a valuable reference for petroleum and chemical engineers as well as advanced undergraduate and graduate students in related fields.
Download or read book In Situ Upgrading of Heavy Oil written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Study of In situ Upgrading for Heavy Oil Using Hydrogen Donors and Catalyst Under Steam Injection Condition written by Zhiyong Zhang and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This research is a study of the in-situ upgrading of Jobo crude oil using steam, tetralin or decalin, and catalyst (Fe(acac)3) at temperatures of 250 °C, 275 °C and 300 °C for 24 hours, 48 hours and 72 hours using an autoclave. Viscosity, API gravity and compositional changes were investigated. We found that tetralin and decalin alone were good solvents for heavy oil recovery. Tetralin or decalin at concentrations of 9% (weight basis) could reduce the Jobo crude oil viscosity measured at 50 °C by 44±2% and 39±3%. Steam alone had some upgrading effects. It could reduce the oil viscosity by 10% after 48 hours of contact at 300°C. Tetralin, decalin or catalyst showed some upgrading effects when used together with steam and caused 5.4±4%, 4±1% and 19±3% viscosity reduction compared with corresponding pre-upgrading mixture after 48 hours of reaction at 300°C. The combination of hydrogen donor tetralin or decalin and catalyst reduced the viscosity of the mixture the most, by 56±1% and 72±1% compared with pre-upgrading mixture. It meant that hydrogen donors and catalyst had strong synergetic effects on heavy oil upgrading. We also found that 300 °C was an effective temperature for heavy oil upgrading with obvious viscosity reduction in the presence of steam, hydrogen donors and catalyst. Reaction can be considered to have reached almost equilibrium condition after 48 hours. The GC-MS analysis of the gas component showed that light hydrocarbon gases and CO2 were generated after reaction. The viscosity reduction from decalin use is larger than that of tetralin because decalin has more hydrogen atoms per molecule than tetralin. A mechanism of transferring H (hydrogen atom) from H2O and hydrogen donors to heavy oil, which can lead to structure and composition changes in heavy oil, is explained. The study has demonstrated that in-situ heavy oil upgrading has great potential applications in heavy and extra heavy oil recovery.
Download or read book Heavy Oil Recovery and Upgrading written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2019-02-28 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy Oil Recovery and Upgrading covers properties, factors, methods and all current and upcoming processes, giving engineers, new and experienced, the full spectrum of recovery choices, including SAGD, horizontal well technology, and hybrid approaches. Moving on to the upgrading and refining of the product, the book also includes information on in situ upgrading, refining options, and hydrogen production. Rounding out with environmental effects, management methods on refinery waste, and the possible future configurations within the refinery, this book provides engineers with a single source to make decisions and manage the full range of challenges. Presents the properties, mechanisms, screening criteria and field applications for heavy oil enhanced recovery projects Includes current upgrading options and future methods for refining heavy oil development Fills in the gaps between literature and practical application for everyday industry reference
Download or read book Sovent Based Enhanced Oil Recovery for In Situ Upgrading of Heavy Oil Sands written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: With the depletion of conventional crude oil reserves in the world, heavy oil and bitumen resources have great potential to meet the future demand for petroleum products. However, oil recovery from heavy oil and bitumen reservoirs is much more difficult than that from conventional oil reservoirs. This is mainly because heavy oil or bitumen is partially or completely immobile under reservoir conditions due to its extremely high viscosity, which creates special production challenges. In order to overcome these challenges significant efforts were devoted by Applied Research Center (ARC) at Florida International University and The Center for Energy Economics (CEE) at the University of Texas. A simplified model was developed to assess the density of the upgraded crude depending on the ratio of solvent mass to crude oil mass, temperature, pressure and the properties of the crude oil. The simplified model incorporated the interaction dynamics into a homogeneous, porous heavy oil reservoir to simulate the dispersion and concentration of injected CO2. The model also incorporated the characteristic of a highly varying CO2 density near the critical point. Since the major challenge in heavy oil recovery is its high viscosity, most researchers have focused their investigations on this parameter in the laboratory as well as in the field resulting in disparaging results. This was attributed to oil being a complex poly-disperse blend of light and heavy paraffins, aromatics, resins and asphaltenes, which have diverse behaviors at reservoir temperature and pressures. The situation is exacerbated by a dearth of experimental data on gas diffusion coefficients in heavy oils due to the tedious nature of diffusivity measurements. Ultimately, the viscosity and thus oil recovery is regulated by pressure and its effect on the diffusion coefficient and oil swelling factors. The generation of a new phase within the crude and the differences in mobility between the new crude matrix and the precipitate readily enables removal of asphaltenes. Thus, an upgraded crude low in heavy metal, sulfur and nitrogen is more conducive for further purification.
Download or read book Subsurface Upgrading of Heavy Crude Oils and Bitumen written by Cesar Ovalles and published by CRC Press. This book was released on 2021-12-13 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy crude oils and bitumen represent more than 50% of all hydrocarbons available on the planet. These feedstocks have a low amount of distillable material and high level of contaminants that make their production, transportation, and refining difficult and costly by conventional technologies. Subsurface Upgrading of Heavy Crude Oils and Bitumen is of interest to the petroleum industry mainly because of the advantages compared to aboveground counterparts. The author presents an in-depth account and a critical review of the progress of industry and academia in underground or In-Situ upgrading of heavy, extra-heavy oils and bitumen, as reported in the patent and open literature. This work is aimed to be a standalone monograph, so three chapters are dedicated to the composition of petroleum and fundamentals of crude oil production and refining. Key Features: Offers a multidisciplinary scope that will appeal to chemists, geologists, biologists, chemical engineers, and petroleum engineers Presents the advantages and disadvantages of the technologies considered Discusses economic and environmental considerations for all the routes evaluated and offers perspectives from experts in the field working with highlighted technologies
Download or read book In situ Upgrading of Omani Heavy Oil by Bimetallic Catalysts written by Abdullahi Yusuf and published by . This book was released on 2017 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Subsurface Upgrading of Heavy Crude Oils and Bitumen written by Cesar Ovalles and published by CRC Press. This book was released on 2019-07-24 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy crude oils and bitumen represent more than 50% of all hydrocarbons available on the planet. These feedstocks have a low amount of distillable material and high level of contaminants that make their production, transportation, and refining difficult and costly by conventional technologies. Subsurface Upgrading of Heavy Crude Oils and Bitumen is of interest to the petroleum industry mainly because of the advantages compared to aboveground counterparts. The author presents an in-depth account and a critical review of the progress of industry and academia in underground or In-Situ upgrading of heavy, extra-heavy oils and bitumen, as reported in the patent and open literature. This work is aimed to be a standalone monograph, so three chapters are dedicated to the composition of petroleum and fundamentals of crude oil production and refining. Key Features: Offers a multidisciplinary scope that will appeal to chemists, geologists, biologists, chemical engineers, and petroleum engineers Presents the advantages and disadvantages of the technologies considered Discusses economic and environmental considerations for all the routes evaluated and offers perspectives from experts in the field working with highlighted technologies
Download or read book Experimental Investigation of in Situ Upgrading of Heavy Oil by Using a Hydrogen Donor and Catalyst During Steam Injection written by Ahmad A. A Mohammad and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments were conducted to investigate the feasibility of in situ upgrading of heavy oil by the use of an orgametallic catalyst and a hydrogen donor (tetralin). The experiments used a vertical injection cell into which a mixture of sand, water, and Jobo oil was thoroughly mixed and packed. Two types of runs were conducted: a run where the tetralin and catalyst were mixed within the mixture before packing into the cell, and the other was conducted by injecting a slug of the tetralin-catalyst solution before commencing with the steam injection. The Jobo oil used had an oil gravity of 12.4° API and a viscosity of 7800 cp at 30°C. The injection cell was placed in a vacuum jacket and set to a reservoir temperature of 50°C. Superheated steam at 273°C was then injected into the injection cell at a rate of 5.5 cc/min (cold water equivalent). The cell outlet pressure was maintained at 500 psig. Produced liquid samples were collected periodically through a series of separators. The produced oil was divided into two halves and several measurements and analyses were carried out on them. These included viscosity, density, elemental analysis and liquid composition. Experimental results indicated that tetralin alone was a worthy additive and increased recovery by 15% compared to that of pure steam. The premixed tetralincatalyst run showed improved recovery to that of pure steam by 20%. Experiments also showed that, when the tetralin-catalyst solution was injected rather than mixed, the results were equivalent to tetralin injection runs. Oil production acceleration was displayed by all the runs with tetralin and tetralin-catalyst but was more pronounced with the availability of catalyst.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling In situ Upgrading ISU of Heavy Oil Using Dimensionless Analysis and Operator Splitting Method written by Julien Maes and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Situ Combustion for Upgrading of Heavy Oil written by Syaiful Bahri and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Upgrading and Enhanced Recovery of Jobo Heavy Oil Using Hydrogen Donor Under In situ Combustion written by Samir Huseynzade and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In-situ upgrading of oil using hydrogen donors is a new process. In particular, very little research has been conducted with respect to in-situ oil upgrading using hydrogen donor under in-situ combustion. Several papers describe the use of metal additives mixed with oil and their influence on oil properties such as viscosity and API gravity. The main objective of my research is to determine if a catalyst mixed with a hydrogen donor (tetralin) is going to affect the Jobo crude oil properties while undergoing in-situ combustion. Six runs were performed with Jobo crude oil (9-11°API) from the Orinoco Belt in Venezuela. Four of the runs were successful. Two of them are base runs; the remaining ones are with tetralin with concentration of 5 wt% (of oil) and catalyst with concentration of 750 ppm. For all runs, the following were kept constant: the air injection rate (3 std. L/min) and production (combustion tube outlet) pressure, 300 psig. Concentration by weight of oil, water, and sand in the samples were approximately 4.8%, 4.2%, and 91% respectively. Oil viscosity at the end of combustion at 40°C decreased from 42.3 and 73.6 to 16.6 and 25.2; API gravity at the end of combustion increased from 18.4 and 16.8 to 20 and 18.8. Oil recovery is higher; combustion front velocity is faster in the case of additives, water production decreased. Since oil viscosity decreased and API gravity increased oil moves faster and consequently combustion time is lower.
Download or read book Enhanced Oil Recovery Field Case Studies written by James J.Sheng and published by Gulf Professional Publishing. This book was released on 2013-04-10 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced Oil Recovery Field Case Studies bridges the gap between theory and practice in a range of real-world EOR settings. Areas covered include steam and polymer flooding, use of foam, in situ combustion, microorganisms, "smart water"-based EOR in carbonates and sandstones, and many more. Oil industry professionals know that the key to a successful enhanced oil recovery project lies in anticipating the differences between plans and the realities found in the field. This book aids that effort, providing valuable case studies from more than 250 EOR pilot and field applications in a variety of oil fields. The case studies cover practical problems, underlying theoretical and modeling methods, operational parameters, solutions and sensitivity studies, and performance optimization strategies, benefitting academicians and oil company practitioners alike. Strikes an ideal balance between theory and practice Focuses on practical problems, underlying theoretical and modeling methods, and operational parameters Designed for technical professionals, covering the fundamental as well as the advanced aspects of EOR
Download or read book Heavy Crude Oils written by Alain-Yves Huc and published by Editions TECHNIP. This book was released on 2011 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy oils, extra-heavy oils and tar sands are major players for the future of energy.They represent a massive world resource, at least the size of conventional oils. They are found all over the world but Canada and Venezuela together account, by themselves, for more than half of world deposits. They share the same origin as the lighter conventional oils, but their geological fate drove them into thick, viscous tar-like crude oils. Most of them result from alteration processes mediated by microbial degradation. They are characterized by a low content of lighter cuts and a high content of impurities such as sulfur and nitrogen compounds and metals ; so, their production is difficult and deployment of specific processes is required in order to enhance their transportability and to upgrade them into valuable products meeting market needs, and honouring environmental requirements.Although these resources are increasingly becoming commercially producible, less than 1% of total heavy crude oil deposits worldwide are under active development. The voluntarily wide scope of this volume encompasses geology, production, transportation, upgrading, economics and environmental issues of heavy oils. It does not pretend to be exhaustive, but to provide an authoritative view of this very important energy resource.
Download or read book Practical Advances in Petroleum Processing written by Chang Samuel Hsu and published by Springer Science & Business Media. This book was released on 2007-01-10 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes topics not found together in books on petroleum processing: economics, automation, process modeling, online optimization, safety, environmental protection Combines overviews of petroleum composition, refinery processes, process automation, and environmental protection with comprehensive chapters on recent advances in hydroprocessing, FCC, lubricants, hydrogen management Gives diverse perspectives, both geographic and topical, because contributors include experts from eight different countries in North America, Europe and Asia, representing oil companies, universities, catalyst vendors, process licensors, consultants and engineering contractors
Download or read book Upgrading of Heavy and Extra Heavy Crude Oils by Catalytic Hydrotreating written by Jorge Ancheyta and published by CRC Press. This book was released on 2023-09-26 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the common approaches to upgrade heavy and extra-heavy crude oils by means of catalytic hydrotreating, emphasizing hydrogen addition technology as well as carbon rejection alternatives. Kinetic and reactor models are combined with experimental data to simulate and optimize commercial-scale reactor performance. Key Features • Focuses on fixed-bed catalytic hydrotreating and catalysts and process scheme characteristics for commercial application. • Guides readers on hydrotreating process technology development from batch reactor experiments to semi-commercial test. • Describes step-by-step methodologies for development of kinetic models based on experimental data generated at different reaction scales. • Provides detailed explanation on how to formulate a reactor model for the simulation of catalytic hydrotreating of heavy oils. A comprehensive guide to the upgrading of crude oils, this book has particular appeal for petroleum refining industry professionals, catalyst developers, workshop instructors, professors, and their graduate and postgraduate students.
