Download or read book In situ Structure Characterization of Elastomers during Deformation and Fracture written by Karsten Brüning and published by Springer. This book was released on 2014-06-21 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis offers novel insights into the time-dependent structural evolution of polymers under deformation. In-situ tensile experiments at high-brilliance synchrotron sources allowed to characterize the material with unrivaled resolution in time and space. The strain-induced crystallization in natural rubber was studied by wide-angle X-ray diffraction. Special emphasis was put on the establishment of new structure-property relationships to give a more in-depth understanding of the mechanical performance of rubber parts, e.g. in tear fatigue loading. To this end, the kinetics of strain-induced crystallization were investigated, subjecting the material to high strain rates. The local structure around a crack tip was observed by scanning wide-angle X-ray diffraction. Ultra-small angle X-ray scattering served to study filled elastomers under deformation, from specially prepared model filler systems to industrially relevant carbon black filled rubbers. Other methods include electron microscopy coupled with in-situ tensile testing and optical dilatometry to examine cavitation in rubbers. The underlying theory as well as a literature review are covered by an extensive introductory chapter, followed by a description of the experimental techniques. The results are presented in more detail than in the original journal publications.
Download or read book Fracture Mechanics and Statistical Mechanics of Reinforced Elastomeric Blends written by Wolfgang Grellmann and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomers are found in many applications ranging from technology to daily life applications for example in tires, drive systems, sealings and print rollers. Dynamical operation conditions put extremely high demands on the performance and stability of these materials and their elastic and flow properties can be easily adjusted by simple manipulations on their elastic and viscous properties. However, the required service life suffers often from material damage as a result of wear processes such as abrasion and wear fatigue, mostly caused by crack formation and propagation. This book covers interdisciplinary research between physics, physical chemistry, material sciences and engineering of elastomers within the range from nanometres to millimetres and connects these aspects with the constitutive material properties. The different chapters describe reliable lifetime and durability predictions based on new fracture mechanical testing concepts and advanced material-theoretical methods which are finally implemented in the finite element method for structural simulations. The use of this approach allows a realistic description of complex geometrical and loading conditions which includes the peculiarities of the mechanical behaviour of elastomeric materials in detail. Furthermore, this approach demonstrates how multi-scale research concepts provide an ambitious interdisciplinary challenge at the interface between engineering and natural sciences. This book covers the interests of academic researchers, graduate students and professionals working in polymer science, rubber and tire technology and in materials science at the interface of academic and industrial research.
Download or read book Constitutive Models for Rubber XII written by Claudia Marano and published by CRC Press. This book was released on 2022-12-22 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Models for Rubber XII is a comprehensive compilation of the oral and poster contributions to the XII European Conference on Constitutive Models for Rubbers (Milan, Italy, 7-9 September 2022). As the first after the COVID Pandemic, the XII edition again brought together researchers from the industry and the academia working in the field of elastomer technology and science to discuss the most recent advancement in the following topics: • Constitutive models • Micro-structural investigations • Experimental methods and characterization • Numerical methods • Fatigue and fracture • Aging • Industrial applications • Smart elastomer materials: applications and modelling Including more than 80 contributions from authors from around the world, this book aims at professionals and academics interested in elastomer technology and science.
Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties Explores novel applications of natural rubber across a range of industries, including current and potential uses Discusses resources and utilization, and considers sustainable future development of natural rubber
Download or read book Designing of Elastomer Nanocomposites From Theory to Applications written by Klaus Werner Stöckelhuber and published by Springer. This book was released on 2016-10-31 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science.The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics.Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned.Readership: Polymer scientists, or& nbsp;scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students.
Download or read book Constitutive Models for Rubber XI written by Bertrand Huneau and published by CRC Press. This book was released on 2019-06-14 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Constitutive Models for Rubber XI is a comprehensive compilation of both the oral and poster contributions to the European Conference on Constitutive Models for Rubber. This 11th edition, held in Nantes (France) 25-27th June 2019, is the occasion to celebrate the 20th anniversary of the ECCMR series. Around 100 contributions reflect the state-of-the-art in the mechanics of elastomers. They cover the fields of: Material testing Constitutive modelling and finite element implementation Micromechanical aspects, and Durability (failure, fatigue and ageing) Constitutive Models for Rubber XI is of interest for developers and researchers involved in the rubber processing and CAE software industries, as well as for academics in nearly all disciplines of elastomer mechanics and technology.
Download or read book Degradation of Elastomers in Practice Experiments and Modeling written by Gert Heinrich and published by Springer Nature. This book was released on 2022-10-14 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes new insights into the main aspects of rubber degradation by material’s fatigue, wear and aging evolution, as well as their impact on mechanical rubber properties. It provides a thorough state-of-art explanation of the essential chemical, physical and mechanical principles as well as practices of material characterization for wear prediction, and to convey or define novel strategies and procedures of planning effective wear test programs. The initiating factors of abrasion, the development of surface abrasion on sharp and blunt tracks (so called cutting and chipping) and the influence of smear and lubricants is also summarized. The volume is of interest to research scientists in related fields from academia and industry.
Download or read book Fracture Fatigue Failure and Damage Evolution Volume 3 written by Allison Beese and published by Springer Nature. This book was released on 2023-01-01 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture, Fatigue, Failure and Damage Evolution, Volume 3 of the Proceedings of the 2022 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Novel Experimental Methods Extreme Environments Interfacial Fracture Integration of Models & Experiments Mechanics of Energy & Energetic Materials Integration of Models & Experiments In Situ Techniques for Fatigue & Fracture Microscale & Microstructural Effects on Mechanical Behavior
Download or read book Rubber Science written by Yuko Ikeda and published by Springer. This book was released on 2017-09-26 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an up-to-date text on rubber science and is a breakthrough among many rubber-related publications. Emphasis is placed on the most modern scientific approaches to rubber science, departing from the usual detailed descriptions of trial-and-error results of traditional rubber technology. The book is a good introduction to modern rubber science both for graduate students and for more or less experienced rubber engineers for updating their way of thinking in handling of technological problems. Due to the increasing importance of pneumatic tires of vehicles and aircraft in modern transportation, this work will be of great use for general readers as well, including those who are concerned with sustainable development.
Download or read book Polypropylene written by Fatih Dogan and published by BoD – Books on Demand. This book was released on 2012-05-30 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to bring together researchers and their papers on polypropylene, and to describe and illustrate the developmental stages polypropylene has gone through over the last 70 years. Besides, one can find papers not only on every application and practice of polypropylene but also on the latest polypropylene technologies. It is also intended in this compilation to present information on polypropylene in a medium readily accessible for any reader.
Download or read book Deformation and Fracture Behaviour of Polymers written by Wolfgang Grellmann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of recent advances in the fracture mechanics of polymers, morphology property correlations, hybrid methods for polymer testing and polymer diagnostics, and biocompatible materials and medical prostheses, as well as application examples and limits.
Download or read book Characterization and Failure Analysis of Plastics written by ASM International and published by ASM International. This book was released on 2003-01-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.
Download or read book Challenges in Mechanics of Time Dependent Materials Fracture Fatigue Failure and Damage Evolution Volume 2 written by Meredith Silberstein and published by Springer Nature. This book was released on 2019-12-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2019 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length Scales Extreme Conditions & Environmental Effects Soft Materials and Biomaterials Damage, Fatigue and Fracture Structure, Function and Performance Rate Effects in Elastomers Viscoelasticity & Viscoplasticity Research in Progress In-situ Techniques and Microscale Effects on Mechanical Behavior Fracture and Fatigue in Brittle Materials Novel Experimental Methods Fatigue and Fracture in Extreme Environments Integration of Models and Experiments Failure in Elastomers and Gels Rate Effects in Elastomers Microscale and Microstructural Effects on Mechanical Behavior Mechanics of Energy Materials Additive Manufacturing: Fatigue and Fracture Mechanics of Composite Materials Interfacial and Mixed-Mode Fracture Vibration Effects and High Cycle Fatigue
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Adhesion Science and Engineering written by and published by Elsevier. This book was released on 2002-11-14 with total page 2014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Mechanics of Adhesion shows that adhesion science and technology is inherently an interdisciplinary field, requiring fundamental understanding of mechanics, surfaces, and materials. This volume comprises 19 chapters. Starting with a background and introduction to stress transfer principles; fracture mechanics and singularities; and an energy approach to debonding, the volume continues with analysis of structural lap and butt joint configurations. It then continues with discussions of test methods for strength and constitutive properties; fracture; peel; coatings, the case of adhesion to a single substrate; elastomeric adhesives such as sealants. The role of mechanics in determining the locus of failure in bonded joints is discussed, followed by a chapter on rheology relevant to adhesives and sealants. Pressure sensitive adhesive performance; the principles of tack and tack measurements; and contact mechanics relevant to wetting and surface energy measurements are then covered. The volume concludes with sections on fibermatrix bonding and reinforcement; durability considerations for adhesive bonds; ultrasonic non-destructive evaluation of adhesive bonds; and design of adhesive bonds from a strength perspective. This book will be of interest to practitioners in the fields of engineering and to those with an interest in adhesion science.
Download or read book Polymer Composites Nanocomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2013-04-16 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are materials in which the matrix polymer isreinforced with organic/inorganic fillers of a definite size andshape, leading to enhanced performance of the resultant composite.These materials find a wide number of applications in such diversefields as geotextiles, building, electronics, medical, packaging,and automobiles. This first systematic reference on the topic emphasizes thecharacteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia,government, industry, as well as private research institutionsacross the globe, and adopt a practical approach here, coveringsuch aspects as the preparation, characterization, properties andtheory of polymer composites. The book begins by discussing the state of the art, new challenges,and opportunities of various polymer composite systems. Interfacialcharacterization of the composites is discussed in detail, as isthe macro- and micromechanics of the composites. Structure-propertyrelationships in various composite systems are explained with thehelp of theoretical models, while processing techniques for variousmacro- to nanocomposite systems and the influence of processingparameters on the properties of the composite are reviewed indetail. The characterization of microstructure, elastic,viscoelastic, static and dynamic mechanical, thermal, tribological,rheological, optical, electrical and barrier properties arehighlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites;Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.
Download or read book Deformation and Fracture Behaviour of Polymer Materials written by Wolfgang Grellmann and published by Springer. This book was released on 2017-07-12 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most recent advances in the deformation and fracture behaviour of polymer material. It provides deeper insight into related morphology–property correlations of thermoplastics, elastomers and polymer resins. Each chapter of this book gives a comprehensive review of state-of-the-art methods of materials testing and diagnostics, tailored for plastic pipes, films and adhesive systems as well as elastomeric components and others. The investigation of deformation and fracture behaviour using the experimental methods of fracture mechanics has been the subject of intense research during the last decade. In a systematic manner, modern aspects of fracture mechanics in the industrial application of polymers for bridging basic research and industrial development are illustrated by multifarious examples of innovative materials usage. This book will be of value to scientists, engineers and in polymer materials science.
