Download or read book Implementing Scalable CAN Security with CANcrypt written by Olaf Pfeiffer and published by . This book was released on 2017-03-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the Controller Area Network (CAN) was designed, security was not a requirement. The primary usage of CAN was considered closed; possible intruders or attackers would simply not get physical or remote access to the network. However, today it is more and more common that devices connected to a CAN system also have connections to other networks, including the Internet. Recent car hacks have shown that attackers may get access to CAN systems. Without strong security features, an attacker automatically gains full access to everything connected, allowing active control commands to be recorded and replayed.In this book we examine which options developers of CAN based systems realistically can use to provide adequate security features. What can we do? Without introducing ?classical? security features?To detect possibly injected messages?Without any hardware change? With minimal software change and integration effort?We introduce the open CANcrypt protocol and software interface, which provides a scalable and customizable CAN security system. Depending on the application requirements and resources available in the individual devices, various protection levels can be realized.
Download or read book Diagnostic Communication with Road Vehicles and Non Road Mobile Machinery written by Peter Subke and published by SAE International. This book was released on 2019-03-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostic Communication with Road-Vehicles and Non-Road Mobile Machinery examines the communication between a diagnostic tester and E/E systems of road-vehicles and non-road mobile machinery such as agricultural machines and construction equipment. The title also contains the description of E/E systems (control units and in-vehicle networks), the communication protocols (e.g. OBD, J1939 and UDS on CAN / IP), and a glimpse into the near future covering remote, cloud-based diagnostics and cybersecurity threats.
Download or read book Implementing Scalable CAN Security with CANcrypt written by Olaf Pfeiffer and published by . This book was released on 2017-03-31 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book State of the Art Sensors Technology in Spain 2017 Volume 2 written by Gonzalo Pajares Martinsanz and published by MDPI. This book was released on 2018-05-22 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "State-of-the-Art Sensors Technology in Spain 2017" that was published in Sensors
Download or read book Embedded Networking with CAN and CANopen written by Olaf Pfeiffer and published by Copperhill Media. This book was released on 2008 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAN (Controller Area Network) is a serial communication protocol that was originally developed for the automobile industry. CAN is far superior to conventional serial technologies such as RS232 in regards to functionality and reliability and yet CAN implementations are more cost effective. CANopen, a higher layer protocol based on CAN, provides the means to apply the ingenious CAN features to a variety of industrial-strength applications. Many users, for example in the field of medical engineering, opted for CANopen because they have to meet particularly stringent safety requirements. Similar requirements had to be considered by manufacturers of other equipment with very high safety or reliability requirements (e.g. robots, lifts and transportation systems). Providing a detailed look at both CAN and CANopen, this book examines those technologies in the context of embedded networks. There is an overview of general embedded networking and an introduction to the primary functionality provided by CANopen. Everything one needs to know to configure and operate a CANopen network using off-the-shelf components is described, along with details for those designers who want to build their own CANopen nodes. The wide variety of applications for CAN and CANopen is discussed, and instructions in developing embedded networks based on the protocol are included. In addition, references and examples using MicroCANopen, PCANopen Magic, and Vector's high-end development tools are provided.
Download or read book CAN System Engineering written by Wolfhard Lawrenz and published by Springer Science & Business Media. This book was released on 2013-12-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the various challenges and open questions relating to CAN communication networks. Opening with a short introduction into the fundamentals of CAN, the book then examines the problems and solutions for the physical layout of networks, including EMC issues and topology layout. Additionally, a discussion of quality issues with a particular focus on test techniques is presented. Each chapter features a collection of illuminating insights and detailed technical information supplied by a selection of internationally-regarded experts from industry and academia. Features: presents thorough coverage of architectures, implementations and application of CAN transceiver, data link layer and so-called higher layer software; explains CAN EMC characteristics and countermeasures, as well as how to design CAN networks; demonstrates how to practically apply and test CAN systems; includes examples of real networks from diverse applications in automotive engineering, avionics, and home heating technology.
Download or read book Advances in Automation II written by Andrey A. Radionov and published by Springer Nature. This book was released on 2021-03-19 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on innovative research and developments in automation. Spanning a wide range of disciplines, including communication engineering, power engineering, control engineering, instrumentation, signal processing and cybersecurity, it focuses on methods and findings aimed at improving the control and monitoring of industrial and manufacturing processes as well as safety. Based on the International Russian Automation Conference, held on September 6–12, 2020, in Sochi, Russia, the book provides academics and professionals with a timely overview of and extensive information on the state of the art in the field of automation and control systems, and fosters new ideas and collaborations between groups in different countries.
Download or read book A Comprehensible Guide to Controller Area Network written by Wilfried Voss and published by Copperhill Media. This book was released on 2008 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controller Area Network (CAN) is a serial network technology that was originally designed for the automotive industry, but has also become a popular bus in industrial automation. The CAN bus is primarily used in embedded solutions and provides communication among microprocessors up to real-time requirements. A Comprehensible Guide To Controller Area Network represents a very thoroughly researched and complete work on CAN. It provides information on all CAN features and aspects combined with high level of readability. Book jacket.
Download or read book The Car Hacker s Handbook written by Craig Smith and published by No Starch Press. This book was released on 2016-03-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern cars are more computerized than ever. Infotainment and navigation systems, Wi-Fi, automatic software updates, and other innovations aim to make driving more convenient. But vehicle technologies haven’t kept pace with today’s more hostile security environment, leaving millions vulnerable to attack. The Car Hacker’s Handbook will give you a deeper understanding of the computer systems and embedded software in modern vehicles. It begins by examining vulnerabilities and providing detailed explanations of communications over the CAN bus and between devices and systems. Then, once you have an understanding of a vehicle’s communication network, you’ll learn how to intercept data and perform specific hacks to track vehicles, unlock doors, glitch engines, flood communication, and more. With a focus on low-cost, open source hacking tools such as Metasploit, Wireshark, Kayak, can-utils, and ChipWhisperer, The Car Hacker’s Handbook will show you how to: –Build an accurate threat model for your vehicle –Reverse engineer the CAN bus to fake engine signals –Exploit vulnerabilities in diagnostic and data-logging systems –Hack the ECU and other firmware and embedded systems –Feed exploits through infotainment and vehicle-to-vehicle communication systems –Override factory settings with performance-tuning techniques –Build physical and virtual test benches to try out exploits safely If you’re curious about automotive security and have the urge to hack a two-ton computer, make The Car Hacker’s Handbook your first stop.
Download or read book Programming Embedded Systems in C and C written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 1999 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces embedded systems to C and C++ programmers. Topics include testing memory devices, writing and erasing flash memory, verifying nonvolatile memory contents, controlling on-chip peripherals, device driver design and implementation, and more.
Download or read book USB Embedded Hosts written by Jan Axelson and published by Lakeview Research LLC. This book was released on 2011-11-01 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developers who want to access USB devices from their embedded systems will find a helpful resource in USB Embedded Hosts: The Developer’s Guide. This new book from the author of USB Complete shows how small systems can take advantage of the same wealth of USB devices available to conventional PCs. The book begins with a review of USB host communication protocols. Readers then learn which USB host requirements are relaxed for embedded systems and what new requirements some embedded systems must meet. To help in selecting a development platform, the book explores available hardware and software for USB host communications in small systems. The heart of the book focuses on communicating with USB devices. The topics (with example code) include USB drives, keyboards, virtual serial ports, network bridges, mics, speakers, video cameras, and printers, plus devices that don’t fit defined USB classes. Also discussed are systems that support both USB host and device functions. The example code is written for the BeagleBoard-xM open development board using a distribution of Linux targeted to small systems. Also covered is how to use Linux commands and utilities to learn about, monitor, and debug communications with USB devices.
Download or read book Sae J1939 ECU Programming Vehicle Bus Simulation with Arduino written by Wilfried Voss and published by . This book was released on 2015-03-23 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written by a leading expert in the field of Controller Area Network (CAN) technologies, represents the perfect guide to implementing an SAE J1939 protocol stack for embedded systems. The book is filled with numerous C/C++ code examples and valuable documentation of the resulting J1939 vehicle network data traffic. It explains in great detail the inner workings of the protocol through designing and transmitting J1939 data frames, receiving and processing J1939 data frames, and simulating J1939 ECUs (Electronic Control Units). Other Arduino sketches (software projects) include a J1939 network scanner, and a simple SAE J1939 to USB Gateway application with associated Windows GUI (Visual Studio C# project). The collection of sketches is concluded by the ARD1939 project, a fully functional SAE J1939 protocol stack for the Arduino Uno and Mega 2560. As an added value, the included proof of concept explains (by means of code examples and bus traffic recordings) the details of the Transport Protocol (TP) according to SAE J1939/21 (BAM Session, RTS/CTS Session) and the Address Claim Procedure according to SAE J1939/81. In combination with the low-cost and high-level user-friendliness approach of the Arduino environment, this book represents the ideal platform to learning and implementing embedded applications with the SAE J1939 protocol stack.
Download or read book Controller Area Network Prototyping with Arduino written by Wilfried Voss and published by . This book was released on 2014-03 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the Arduino is not widely considered an industrial-strength solution, it provides, due to its low price and ease of programming, the perfect prototyping platform for all kinds of Controller Area Network (CAN) applications. This book, written by a leading expert on CAN technologies, guides the reader through the process of acquiring all necessary hardware and software components, the implementation of the CAN driver, and the implementation of programs (Arduino Sketches) to read, send, process, and display data from and to a CAN network. The collection of programming examples cumulates into a full-fledged USB-to-CAN Gateway communicating with a Windows/Linux PC. This book will enable you to achieve CAN functionality literally within only a few hours. The topics include: Introduction to Controller Area Network Prototyping Hardware and its Variants Arduino CAN Shields CAN Driver Implementation and Library Functions Simple CAN Test Programs CAN Network Monitoring, Simulation, and Diagnostics Program CAN Data Display via Windows/Linux GUI About the Author Wilfried Voss is the author of the "Comprehensible Guide" series of technical literature covering topics like Controller Area Network (CAN), SAE J1939, Industrial Ethernet, and Servo Motor Sizing. Mr. Voss has worked in the CAN industry since 1997 and before that was a motion control engineer in the paper manufacturing industry. He has a master's degree in electrical engineering from the University of Wuppertal in Germany. During the past years, Mr. Voss conducted numerous seminars on industrial fieldbus systems such as CAN, CANopen, SAE J1939, Industrial Ethernet, and more during various Real Time Embedded And Computing Conferences (RTECC), ISA (Instrumentation, Systems, and Automation Society) conferences and various other events all over the United States and Canada."
Download or read book Understanding and Using the Controller Area Network Communication Protocol written by Marco Di Natale and published by Springer Science & Business Media. This book was released on 2012-01-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book to offers a hands-on guide to designing, analyzing and debugging a communication infrastructure based on the Controller Area Network (CAN) bus. Although the CAN bus standard is well established and currently used in most automotive systems, as well as avionics, medical systems and other devices, its features are not fully understood by most developers, who tend to misuse the network. This results in lost opportunities for better efficiency and performance. These authors offer a comprehensive range of architectural solutions and domains of analysis. It also provides formal models and analytical results, with thorough discussion of their applicability, so that it serves as an invaluable reference for researchers and students, as well as practicing engineers.
Download or read book A Comprehensible Guide to J1939 written by Wilfried Voss and published by Copperhill Media Corporation. This book was released on 2008 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: SAE J1939 has become the accepted industry standard and the vehicle network technology of choice for off-highway machines. This resource provides profound information on the J1939 message format and network management.
Download or read book The Fundamental Principles of Automotive Cyber Security written by British Standards Institution and published by . This book was released on 2018 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book USB Complete written by Jan Axelson and published by . This book was released on 2004 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide takes the pain out of designing for this popular interface with specific, detailed examples that show how to develop USB devices and the applications that communicate with them. How the USB communicates with the PC, deciding if a project should use a USB interface, choosing a USB controller chip for peripheral design, and determining code with Windows applications are covered in detail.
