Download or read book Mechanism and Machine Science written by Xianmin Zhang and published by Springer. This book was released on 2016-11-15 with total page 1515 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings collect the latest research results in mechanism and machine science, intended to reinforce and improve the role of mechanical systems in a variety of applications in daily life and industry. Gathering more than 120 academic papers, it addresses topics including: Computational kinematics, Machine elements, Actuators, Gearing and transmissions, Linkages and cams, Mechanism design, Dynamics of machinery, Tribology, Vehicle mechanisms, dynamics and design, Reliability, Experimental methods in mechanisms, Robotics and mechatronics, Biomechanics, Micro/nano mechanisms and machines, Medical/welfare devices, Nature and machines, Design methodology, Reconfigurable mechanisms and reconfigurable manipulators, and Origami mechanisms. This is the fourth installment in the IFToMM Asian conference series on Mechanism and Machine Science (ASIAN MMS 2016). The ASIAN MMS conference initiative was launched to provide a forum mainly for the Asian community working in Mechanism and Machine Science, in order to facilitate collaboration and improve the visibility of activities in the field. The series started in 2010 and the previous ASIAN MMS events were successfully held in Taipei, China (2010), Tokyo, Japan (2012), and Tianjin, China (2014). ASIAN MMS 2016 was held in Guangzhou, China, from 15 to 17 December 2016, and was organized by the South China University under the patronage of the IFToMM and the Chinese Mechanical Engineering Society (CMES). The aim of the Conference was to bring together researchers, industry professionals and students from the broad range of disciplines connected to Mechanism Science in a collegial and stimulating environment. The ASIAN MMS 2016 Conference provided a platform allowing scientists to exchange notes on their scientific achievements and establish new national and international collaborations concerning the mechanism science field and its applications, mainly but not exclusively in Asian contexts.
Download or read book Magnetic Materials Processes and Devices VI written by and published by The Electrochemical Society. This book was released on 2001 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SMST 2006 written by Brian A. Berg and published by ASM International. This book was released on 2008-01-01 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lab on a Chip Devices and Micro Total Analysis Systems written by Jaime Castillo-León and published by Springer. This book was released on 2014-11-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all the steps in order to fabricate a lab-on-a-chip device starting from the idea, the design, simulation, fabrication and final evaluation. Additionally, it includes basic theory on microfluidics essential to understand how fluids behave at such reduced scale. Examples of successful histories of lab-on-a-chip systems that made an impact in fields like biomedicine and life sciences are also provided. This book also: · Provides readers with a unique approach and toolset for lab-on-a-chip development in terms of materials, fabrication techniques, and components · Discusses novel materials and techniques, such as paper-based devices and synthesis of chemical compounds on-chip · Covers the four key aspects of development: basic theory, design, fabrication, and testing · Provides readers with a comprehensive list of the most important journals, blogs, forums, and conferences where microfluidics and lab-on-a-chip news, methods, techniques and challenges are presented and discussed, as well as a list of companies providing design and simulation support, components, and/or developing lab-on-a-chip and microfluidic devices.
Download or read book Microrobotics for Micromanipulation written by Nicolas Chaillet and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microrobotics is an emerging and booming area with many and various applications, including in fields such as industrial/manufacturing robotics, medical robotics, and laboratory instrumentation. Microrobotics for Micromanipulation presents for the first time, in detail, a treatment of the field of robotics dedicated to handling objects of micrometer dimensions. At these dimensions, the behavior of objects is significantly different from the better known, larger scales, which leads to implementation techniques that can be radically different from the more commonly used solutions. This book details the behaviors of objects at the micrometer scale and provides robotics solutions that are suitable, in terms of actuators, grippers, manipulators, environmental perception, and microtechnology. Worked examples are included in the book - enabling engineers, students and researchers to familiarize themselves with this emerging area and to contribute to its development.
Download or read book Robot Intelligence Technology and Applications 5 written by Jong-Hwan Kim and published by Springer. This book was released on 2018-05-31 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes papers from the 5th International Conference on Robot Intelligence Technology and Applications held at KAIST, Daejeon, Korea on December 13–15, 2017. It covers the following areas: artificial intelligence, autonomous robot navigation, intelligent robot system design, intelligent sensing and control, and machine vision. The topics included in this book are deep learning, deep neural networks, image understanding, natural language processing, speech/voice/text recognition, reasoning & inference, sensor integration/fusion/perception, multisensor data fusion, navigation/SLAM/localization, distributed intelligent algorithms and techniques, ubiquitous computing, digital creatures, intelligent agents, computer vision, virtual/augmented reality, surveillance, pattern recognition, gesture recognition, fingerprint recognition, animation and virtual characters, and emerging applications. This book is a valuable resource for robotics scientists, computer scientists, artificial intelligence researchers and professionals in universities, research institutes and laboratories.
Download or read book The Nanotechnology Revolution written by Dale A. Stirling and published by CRC Press. This book was released on 2018-01-17 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is changing the world in a very big way, but at the atomic and sub-atomic level. Although the roots of nanotechnology can be traced back to more than a century ago, the last three decades have witnessed an explosion of nano-based technologies and products. This reference work examines the history, current status, and future directions of nanotechnology through an exhaustive search of the technical and scientific literature. The more than 4000 bibliographic citations it includes are carefully organized into core subject areas, and a geographic and subject index allows readers to quickly locate documents of interest. Although a sense of the global reach and interest in nanotechnology can be gleaned from the reference sections of countless journal articles, conference papers, and books, this is the only reference work providing an in-depth global perspective that is ready-made for nanotechnology professionals and those interested in learning more about all things nanotechnology. Despite the abundance of online resources, there is still an urgent need for well-researched, well-presented, concise, and thematically organized reference works. Instead of relying on wiki pages, citation aggregators, and related websites, the author searched the databases and databanks of scholarly literature search providers such as EBSCO, ProQuest, PUBMED, STN International, and Thomson Reuters. In addition, he used select serials-related databases to account for pertinent documents from countries in which English is not the primary national language (i.e., China Online Journals, e-periodica, J-STAGE, and SciELO Brazil among others).
Download or read book Friction at the Atomic Level written by Motohisa Hirano and published by John Wiley & Sons. This book was released on 2018-02-27 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the most distinguished scientists and a pioneer in this field, this monograph represents a stand-alone, concise guide to friction at the atomic level. It brings together hitherto widely-scattered information in one single source, and is the first to explain the nature of friction in terms of atomistic mechanisms. In addition to his detailed description on modeling and simulation, the author stresses experimental approaches like AFM (Atomic Force Microscope) techniques for verification of theory. In this respect the book will benefit the whole nanotribology community, from graduate students who want to get the basics right up to researchers specializing in mechanical engineering, materials science, physics and chemistry.
Download or read book Magnetic Sensors and Devices written by Laurent A. Francis and published by CRC Press. This book was released on 2017-10-18 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in-depth coverage of magnetic sensors in industrial applications. It is divided into three sections: devices and technology for magnetic sensing, industrial applications (automotive, navigation), and emerging applications. Topics include transmission speed sensor ICs, dynamic differential Hall ICs, chopped Hall switches, programmable linear output Hall sensors, low power Hall ICs, self-calibrating differential Hall ICs for wheel speed sensing, dynamic differential Hall ICs, uni- and bipolar Hall IC switches, chopped mono cell Hall ICs, and electromagnetic levitation.
Download or read book Microrobotics written by Yves Bellouard and published by CRC Press. This book was released on 2009-11-04 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: From conception to realization, Microrobotics: Methods and Applications covers all aspects of miniaturized systems that physically interact and manipulate objects at the microscale. It provides a solid understanding of this multidisciplinary field, which combines areas of materials science, mechanical engineering, and applied physics. Requiring no
Download or read book Implantable Biomedical Microsystems written by Swarup Bhunia and published by Elsevier. This book was released on 2015-01-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and innovation in areas such as circuits, microsystems, packaging, biocompatibility, miniaturization, power supplies, remote control, reliability, and lifespan are leading to a rapid increase in the range of devices and corresponding applications in the field of wearable and implantable biomedical microsystems, which are used for monitoring, diagnosing, and controlling the health conditions of the human body. This book provides comprehensive coverage of the fundamental design principles and validation for implantable microsystems, as well as several major application areas. Each component in an implantable device is described in details, and major case studies demonstrate how these systems can be optimized for specific design objectives. The case studies include applications of implantable neural signal processors, brain-machine interface (BMI) systems intended for both data recording and treatment, neural prosthesis, bladder pressure monitoring for treating urinary incontinence, implantable imaging devices for early detection and diagnosis of diseases as well as electrical conduction block of peripheral nerve for chronic pain management. Implantable Biomedical Microsystems is the first comprehensive coverage of bioimplantable system design providing an invaluable information source for researchers in Biomedical, Electrical, Computer, Systems, and Mechanical Engineering as well as engineers involved in design and development of wearable and implantable bioelectronic devices and, more generally, teams working on low-power microsystems and their corresponding wireless energy and data links. - First time comprehensive coverage of system-level and component-level design and engineering aspects for implantable microsystems. - Provides insight into a wide range of proven applications and application specific design trade-offs of bioimplantable systems, including several major case studies - Enables Engineers involved in development of implantable electronic systems to optimize applications for specific design objectives.
Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Handbook of Robotic and Image Guided Surgery written by Mohammad Hossein Abedin Nasab and published by Elsevier. This book was released on 2019-09-25 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. - A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field - A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries - Chapters are contributed by worldwide experts from both engineering and surgical backgrounds
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the application of ferroelectric devices to innovative systems. In particular, the use of these materials as varying capacitors, gyroscope, acoustics sensors and actuators, microgenerators and memory devices will be exposed, providing an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric devices.
Download or read book Generation GrowBots Materials Mechanisms and Biomimetic Design for Growing Robots written by Barbara Mazzolai and published by Frontiers Media SA. This book was released on 2021-08-18 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Device and Process Technologies for MEMS and Microelectronics written by and published by . This book was released on 2001 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
