Download or read book The Electric Power Engineering Handbook Five Volume Set written by Leonard L. Grigsby and published by CRC Press. This book was released on 2018-12-14 with total page 3036 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electric Power Engineering Handbook, Third Edition updates coverage of recent developments and rapid technological growth in crucial aspects of power systems, including protection, dynamics and stability, operation, and control. With contributions from worldwide field leaders—edited by L.L. Grigsby, one of the world’s most respected, accomplished authorities in power engineering—this reference includes chapters on: Nonconventional Power Generation Conventional Power Generation Transmission Systems Distribution Systems Electric Power Utilization Power Quality Power System Analysis and Simulation Power System Transients Power System Planning (Reliability) Power Electronics Power System Protection Power System Dynamics and Stability Power System Operation and Control Content includes a simplified overview of advances in international standards, practices, and technologies, such as small-signal stability and power system oscillations, power system stability controls, and dynamic modeling of power systems. Each book in this popular series supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. This resource will help readers achieve safe, economical, high-quality power delivery in a dynamic and demanding environment. Volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) K12643 Electric Power Transformer Engineering, Third Edition (9781439856291)
Download or read book Electric Power Transformer Engineering written by James H. Harlow and published by CRC Press. This book was released on 2007-05-30 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining select chapters from Grigsby's standard-setting The Electric Power Engineering Handbook with several chapters not found in the original work, Electric Power Transformer Engineering became widely popular for its comprehensive, tutorial-style treatment of the theory, design, analysis, operation, and protection of power transformers. For its
Download or read book Electric Power Transformer Engineering Third Edition written by James H. Harlow and published by CRC Press. This book was released on 2012-05-16 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Power Transformer Engineering, Third Edition expounds the latest information and developments to engineers who are familiar with basic principles and applications, perhaps including a hands-on working knowledge of power transformers. Targeting all from the merely curious to seasoned professionals and acknowledged experts, its content is structured to enable readers to easily access essential material in order to appreciate the many facets of an electric power transformer. Topically structured in three parts, the book: Illustrates for electrical engineers the relevant theories and principles (concepts and mathematics) of power transformers Devotes complete chapters to each of 10 particular embodiments of power transformers, including power, distribution, phase-shifting, rectifier, dry-type, and instrument transformers, as well as step-voltage regulators, constant-voltage transformers, transformers for wind turbine generators and photovoltaic applications, and reactors Addresses 14 ancillary topics including insulation, bushings, load tap changers, thermal performance, testing, protection, audible sound, failure analysis, installation and maintenance and more As with the other books in the series, this one supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material. Important chapters have been retained from the second edition; most have been significantly expanded and updated for this third installment. Each chapter is replete with photographs, equations, and tabular data, and this edition includes a new chapter on transformers for use with wind turbine generators and distributed photovoltaic arrays. Jim Harlow and his esteemed group of contributors offer a glimpse into the enthusiastic community of power transformer engineers responsible for this outstanding and best-selling work. A volume in the Electric Power Engineering Handbook, Third Edition. Other volumes in the set: K12642 Electric Power Generation, Transmission, and Distribution, Third Edition (ISBN: 9781439856284) K12648 Power Systems, Third Edition (ISBN: 9781439856338) K13917 Power System Stability and Control, Third Edition (9781439883204) K12650 Electric Power Substations Engineering, Third Edition (9781439856383) Watch James H. Harlow's talk about his book: Part One: http://youtu.be/fZNe9L4cux0 Part Two: http://youtu.be/y9ULZ9IM0jE Part Three: http://youtu.be/nqWMjK7Z_dg
Download or read book Power Quality in Power Systems Electrical Machines and Power Electronic Drives written by Ewald F. Fuchs and published by Academic Press. This book was released on 2023-02-13 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Quality in Power Systems, Electrical Machines, and Power-Electronic Drives uses current research and engineering practices, guidelines, standards, and regulations for engineering professionals and students interested in solving power quality problems in a cost effective, reliable, and safe manner within the context of renewable energy systems. The book contains chapters that address power quality across diverse facets of electric energy engineering, including AC and DC transmission and distribution lines; end-user applications such as electric machines, transformers, inductors, capacitors, wind power, and photovoltaic power plants; and variable-speed, variable-torque power-electronic drives. The book covers nonsinusoidal waveshapes, voltage disturbances, harmonic losses, aging and lifetime reductions, single-time events such as voltage dips, and the effects of variable-speed drives controlled by PWM converters. The book also reviews a corpus of techniques to mitigate power-quality problems, such as the optimal design of renewable energy storage devices (including lithium-ion batteries and fuel cells for automobiles serving as energy storage), and the optimal design of nonlinear loads for simultaneous efficiency and power quality. - Provides theoretical and practical insights into power-quality problems related to future, smart grid, renewable, hybrid electric power systems, electric machines, and variable-speed, variable-torque power-electronic drives - Contains a highly varied corpus of practical applications drawn from current international practice - Designed as a self-study tool with end-of-chapter problems and solutions designed to build understanding - Includes very highly referenced chapters that enable readers to save time and money in the research discovery process for critical research articles, regulatory standards, and guidelines
Download or read book Power Quality in Power Systems and Electrical Machines written by Ewald F. Fuchs and published by Academic Press. This book was released on 2015-07-14 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this must-have reference covers power quality issues in four parts, including new discussions related to renewable energy systems. The first part of the book provides background on causes, effects, standards, and measurements of power quality and harmonics. Once the basics are established the authors move on to harmonic modeling of power systems, including components and apparatus (electric machines). The final part of the book is devoted to power quality mitigation approaches and devices, and the fourth part extends the analysis to power quality solutions for renewable energy systems. Throughout the book worked examples and exercises provide practical applications, and tables, charts, and graphs offer useful data for the modeling and analysis of power quality issues. - Provides theoretical and practical insight into power quality problems of electric machines and systems - 134 practical application (example) problems with solutions - 125 problems at the end of chapters dealing with practical applications - 924 references, mostly journal articles and conference papers, as well as national and international standards and guidelines
Download or read book Biological Insulating Liquids written by Ernst Peter Pagger and published by Springer Nature. This book was released on 2023-03-01 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the-art use of biological insulating liquids in detail. In recent years, more and more transformers filled with esters have been put into operation. This is because people recognize the benefits of ester liquids in terms of their fire safety (high flash and fire points) and environmental characteristics, judging from their biodegradability, their low CO2 footprint (only valid for natural ester) and their beneficial interactions with solid insulation, etc. One of the main reasons is that the water adsorption and absorption characteristics of these liquids are excellent and very different compared to mineral oil. The today’s discussion about climate change and global warming is an additional driver for using natural ester. Another advantage is that transformers filled with biological insulating liquids can operate with an overload of up to 150%. This is advantageous in the case of volatile energy generation from wind and solar power and in the supply of electrical energy for electromobility. Liquid inside electrical equipment is the lifeblood that serves both as a dielectric and a cooling medium. Some properties of these liquids differ from mineral oil, which had to be considered in the transformer design. The dielectric liquid is always in direct contact with transformer materials; therefore, the interaction should be very well understood, especially when retrofilling an existing mineral oil filled device. There are several natural ester fluids derived from various seeds and fruits on the market, and their properties may differ more or less. In the book, the most important properties of the different biological insulating fluids and mineral oil are compared. Ester fluids have already found their way into various standards. The condition of the device can be verified very well from the contents of the insulating liquids. For analysis and testing, the same equipment and devices that are commonly used for mineral oil are used for ester liquid. The chemical and physical behaviors of ester fluids compared to mineral oil are different. This must always be considered when interpreting test results stemming from ester fluids. The book is a guideline for students, original equipment manufacturers, users, laboratories and authorities in the use of biological insulating liquids.
Download or read book Transformers written by Xose M. López-Fernández and published by CRC Press. This book was released on 2017-12-19 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent catastrophic blackouts have exposed major vulnerabilities in the existing generation, transmission, and distribution systems of transformers widely used for energy transfer, measurement, protection, and signal coupling. As a result, the reliability of the entire power system is now uncertain, and many blame severe underinvestment, aging technology, and a conservative approach to innovation. Composed of contributions from noted industry experts around the world, Transformers: Analysis, Design, and Measurement offers invaluable information to help designers and users overcome these and other challenges associated with the design, construction, application, and analysis of transformers. This book is divided into three sections to address contemporary economic, design, diagnostic, and maintenance aspects associated with power, instrument, and high-frequency transformers. Topics covered include: Design considerations Capability to withstand short circuits Insulation problems Stray losses, screening, and local excessive heating hazard Shell type and superconducting transformers Links between design and maintenance Component-related diagnostics and reliability Economics of life-cycle cost, design review, and risk-management methods Parameter measurement and prediction This book is an essential tool for understanding and implementing solutions that will ensure improvements in the development, maintenance, and life-cycle management of optimized transformers. This will lead to enhanced safety and reliability and lower costs for the electrical supply. Illustrating the need for close cooperation between users and manufacturers of transformers, this book outlines ways to achieve man
Download or read book Electric Power Quality written by Surajit Chattopadhyay and published by Springer Science & Business Media. This book was released on 2011-03-28 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present day deregulated power market electric power quality issues have become great concerns of utilities, end users and manufacturers. Worldwide researches are going on to address those issues. Electric Power Quality has evolved from the researches carried out by the authors. The key features of the book can be highlighted as follows: the contents focuses, on one hand, different power quality issues, their sources and effects and different related standards, which are required for students, researchers and practising engineers and, on the other hand, measurement techniques for different power quality parameters, the content level is designed in such a way that the concepts of different power quality issues in modern power system are built up first, followed by some existing and new measurement methods. This content should attract the students, researchers and practising engineers, the predominant features are Lucid but concise description of the subject, detailed new measurement techniques and Electric Power Quality is intended for graduate, postgraduate and researchers as well as for professionals in the related fields. At the end, a chapter has been added which deals with a concept of generation of harmonics in a power system and its components.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1988 with total page 1608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1989 1990 Catalog of American National Standards written by American National Standards Institute and published by . This book was released on 1989 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalog of American National Standards written by American National Standards Institute and published by . This book was released on 1995 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Design Guide for Electric Power Service Systems for Generating Stations written by American National Standards Institute and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1993-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electric Power Transformer Engineering written by James H. Harlow and published by CRC Press. This book was released on 2003-08-15 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fundamental theory of electric power transformers, this book provides the background required to understand the basic operation of electromagnetic induction as applied to transformers. The book is divided into three fundamental groupings: one stand-alone chapter is devoted to Theory and Principles, nine chapters individually treat majo
Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.
Download or read book IEEE Guide for Protective Relay Applications to Transmission Lines written by and published by . This book was released on 2000 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly developed guide compiles information on the application considerations of protective relays to ac transmission lines. The guide describes accepted transmission line protection schemes and the different electrical system parameters and situations that affect their application. Its purpose is to provide a reference for the selection of relay schemes and to assist less experienced protective relaying engineers in their application.
Download or read book Wind Power in Power Systems written by Thomas Ackermann and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the highly acclaimed Wind Power in Power Systems has been thoroughly revised and expanded to reflect the latest challenges associated with increasing wind power penetration levels. Since its first release, practical experiences with high wind power penetration levels have significantly increased. This book presents an overview of the lessons learned in integrating wind power into power systems and provides an outlook of the relevant issues and solutions to allow even higher wind power penetration levels. This includes the development of standard wind turbine simulation models. This extensive update has 23 brand new chapters in cutting-edge areas including offshore wind farms and storage options, performance validation and certification for grid codes, and the provision of reactive power and voltage control from wind power plants. Key features: Offers an international perspective on integrating a high penetration of wind power into the power system, from basic network interconnection to industry deregulation; Outlines the methodology and results of European and North American large-scale grid integration studies; Extensive practical experience from wind power and power system experts and transmission systems operators in Germany, Denmark, Spain, UK, Ireland, USA, China and New Zealand; Presents various wind turbine designs from the electrical perspective and models for their simulation, and discusses industry standards and world-wide grid codes, along with power quality issues; Considers concepts to increase penetration of wind power in power systems, from wind turbine, power plant and power system redesign to smart grid and storage solutions. Carefully edited for a highly coherent structure, this work remains an essential reference for power system engineers, transmission and distribution network operator and planner, wind turbine designers, wind project developers and wind energy consultants dealing with the integration of wind power into the distribution or transmission network. Up-to-date and comprehensive, it is also useful for graduate students, researchers, regulation authorities, and policy makers who work in the area of wind power and need to understand the relevant power system integration issues.
Download or read book IEEE Recommended Practice for Calculating Short Circuit Currents in Industrial and Commercial Power Systems written by and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 2006-01-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This recommended practice provides short-circuit current information including calculated short-circuit current duties for the application in industrial plants and commercial buildings, at all power system voltages, of power system equipment that senses, carries, or interrupts short-circuit currents.
