Download or read book Id alisation d assemblages CAO pour l analyse EF de structures written by Flavien Boussuge and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Les entreprises aéronautiques ont un besoin continu de générer de grands et complexes modèles de simulation, en particulier pour simuler le comportement structurel de sous-systèmes de leurs produits. Actuellement, le pré-traitement des modèles de Conception Assistée par Ordinateur (CAO) issus des maquettes numériques de ces sous-systèmes en Modèles Eléments Finis (MEF), est une tâche qui demande de longues heures de travail de la part des ingénieurs de simulation, surtout lorsque des idéalisations géométriques sont nécessaires. L'objectif de ce travail de thèse consiste à définir les principes et les opérateurs constituant la chaîne numérique qui permettra, à partir de maquettes numériques complexes, de produire des géométries directement utilisables pour la génération de maillages éléments finis d'une simulation mécanique. A partir d'une maquette numérique enrichie d'information sur les interfaces géométriques entre composants et d'information sur les propriétés fonctionnelles de l'assemblage, l'approche proposée dans ce manuscrit est d'ajouter un niveau supplémentaire d'enrichissement en fournissant une représentation structurelle de haut niveau de la forme des composants CAO. Le principe de cet enrichissement est d'extraire un graphe de construction de modèles CAO B-Rep de sorte que les processus de génération de forme correspondants fournissent des primitives volumiques directement adaptées à un processus d'idéalisation. Ces primitives constituent la base d'une analyse morphologique qui identifie dans les formes des composants à la fois des sous-domaines candidats à l'idéalisation mais également les interfaces géométriques qui leurs sont associées. Ainsi, les modèles de composants et leurs représentations géométriques sont structurés. Ils sont intégrés dans la maquette numérique enrichie qui est ainsi contextualisée pour la simulation par EF. De cette maquette numérique enrichie, les objectifs de simulation peuvent être utilisés pour spécifier les opérateurs géométriques adaptant les composants et leurs interfaces lors de processus automatiques de préparation d'assemblages. Ainsi, un nouveau procédé d'idéalisation de composant unitaire est proposé. Il bénéficie de l'analyse morphologique faite sur le composant lui fournissant une décomposition en sous-domaines idéalisables et en interfaces. Cette décomposition est utilisée pour générer les modèles idéalisés de ces sous-domaines et les connecter à partir de l'analyse de leurs interfaces, ce qui conduit à l'idéalisation complète du composant. Enfin, le processus d'idéalisation est étendu au niveau de l'assemblage et évolue vers une méthodologie de pré-traitement automatique de maquettes numériques. Cette méthodologie vise à exploiter l'information fonctionnelle de l'assemblage et les informations morphologiques des composants afin de transformer à la fois des groupes de composants associés à une même fonction ainsi que de traiter les transformations d'idéalisation de l'assemblage. Pour démontrer la validité de la méthodologie, des opérateurs géométriques sont développés et testés sur des cas d'application industriels.
Download or read book Connections in Steel Structures written by R. Bjorhovde and published by CRC Press. This book was released on 1988-02-19 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the Proceedings of a State-of-the-Art Workshop on Connenctions and the Behaviour, Strength and Design of Steel Structures held at Laboratoire de Mecanique et Technologie, Ecole Normale, Cachan France from 25th to 27th May 1987. It contains the papers presented at the above proceedings and is split into eight main sections covering: Local Analysis of Joints, Mathematical Models, Classification, Frame Analysis, Frame Stability and Simplified Methods, Design Requirements, Data Base Organisation, Research and Development Needs. With papers from 50 international contributors this text will provide essential reading for all those involved with steel structures.
Download or read book Integrated Design and Manufacturing in Mechanical Engineering written by Patrick Chedmail and published by Springer. This book was released on 2012-11-05 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the selected papers of the first I.D.M.M.E. conference on 'Integrated Design and Manufacturing in Mechanical Engineering', held in Nantes from 15-17 April 1996. Its objective was to discuss the questions related to the definition of the optimal design and manufacturing processes and to their integration through coherent methodologies in adapted environments. The initiative of the Conference and the organization thereof, is mainly due to the efforts of the french PRIMECA group (Pool of Computer Resources for Mechanics) started eight years ago. We were able to attract the internationru community with the support of the International Institution for Production Engineering Research (C.I.R.P.). The conference brought together two hundred and fifty specialists from around the world. About ninety papers and twenty posters were presented covering three main topics : optimization and evaluation of the product design process, optimization and evaluation of the manufacturing systems and methodological aspects.
Download or read book Marine Cyanobacteria written by Loïc Charpy and published by Musee Oceanographique. This book was released on 1999 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Terra 2008 written by Leslie Rainer and published by Getty Publications. This book was released on 2011-06-14 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthen architecture constitutes one of the most diverse forms of cultural heritage and one of the most challenging to preserve. It dates from all periods and is found on all continents but is particularly prevalent in Africa, where it has been a building tradition for centuries. Sites range from ancestral cities in Mali to the palaces of Abomey in Benin, from monuments and mosques in Iran and Buddhist temples on the Silk Road to Spanish missions in California. This volume's sixty-four papers address such themes as earthen architecture in Mali, the conservation of living sites, local knowledge systems and intangible aspects, seismic and other natural forces, the conservation and management of archaeological sites, research advances, and training.
Download or read book Product Life Cycle Management written by Max Giordano and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive view of the most recent major international research in the field of tolerancing, and is an excellent resource for anyone interested in Computer Aided Tolerating. It is organized into 4 parts. Part 1 focuses on the more general problems of tolerance analysis and synthesis, for tolerancing in mechanical design and manufacturing processes. Part 2 specifically highlights the simulation of assembly with defects, and the influence of tolerances on the quality of the assembly. Part 3 deals with measurement aspects, and quality control throughout the life cycle. Different measurement technologies and methods for estimating uncertainty are considered. In Part 4, different aspects of tolerancing and their interactions are explored, from the definition of functional requirement to measurement processes in a PLM approach.
Download or read book Historic Mortars written by Jan Válek and published by Springer Science & Business Media. This book was released on 2012-06-23 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on research and practical issues connected with mortars on historic structures. The book is divided into four sections: Characterisation of Historic Mortars, Repair Mortars and Design Issues, Experimental Research into Properties of Repair Mortars, and Assessment and Testing. The papers present the latest work of researchers in their field. The individual contributions were selected from the contributions to the 2nd Historic Mortars Conference, which took place in Prague, September, 22-24, 2010. All papers were reviewed and improved as necessary before publication. This peer review process by the editors resulted in the 34 individual contributions included in here. One extra paper reviewing and summarising State-of-the-Art knowledge covered by this publication was added as a starting and navigational point for the reader. The editors believe that having these papers in print is important and they hope that it will stimulate further research into historic mortars and related subjects.
Download or read book Phase equilibrium Relations of the Common Rock forming Oxides Except Water written by George Washington Morey and published by . This book was released on 1964 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rebuilding of Marine Fisheries Global review written by Serge Garcia and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Rebuilding depleted stocks is a central part of the fisheries governance agenda. By analysing the available literature, Part 1 of "Rebuilding of marine fisheries" provides a global review of the emergence of the rebuilding paradigm, its key concepts, the trends in fishery resources, and the empirical evidence available on stocks depletion, collapse and rebuilding. It addresses the bio-ecological, economic, and human dimensions of rebuilding or restoration of stocks, multispecies assemblages and habitats/ecosystems and touches on the need for rebuilding at the whole sector level when depletion has become widespread and chronic. The human imensions of stocks and fisheries are given particular attention, looking at conflicting objectives, the bio-economy of rebuilding, its costs and benefits, and the distributional effects of the related reform among actors with their potential social consequences in the short and long terms. Governance is addressed in detail: legal and policy frameworks; rationale and objectives of a rebuilding regime; alternative rebuilding strategies; reference values and protocols; regulatory time-frames; risk management and harvest control rules; impacts of climatic oscillations; management tool-box; implementation guidance and performance evaluation. The document ends with a review of the determinants of success of a rebuilding programme."--Publisher's description for part 1.
Download or read book Urban Trialogues written by André Loeckx and published by UN-HABITAT. This book was released on 2004 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looks at the process and outputs of the Localising Agenda 21 programme in Nakuru (Kenya), Essaouira (Morocco), Vinh (Vietnam) and Bayamo (Cuba). Reflects on the relationship between sustainable visions for possible futures and strategic urban projects.
Download or read book Life in Extreme Environments written by Ricardo Amils Pibernat and published by Springer Science & Business Media. This book was released on 2007-07-21 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an intriguing look at how life can adapt to many different extreme environments. It addresses the limits for life development and examines different strategies used by organisms to adapt to different extreme environments.
Download or read book Faecal Sludge Management written by Linda Strande and published by IWA Publishing. This book was released on 2014-08-15 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that literally billions of residents in urban and peri-urban areas of Africa, Asia, and Latin America are served by onsite sanitation systems (e.g. various types of latrines and septic tanks). Until recently, the management of faecal sludge from these onsite systems has been grossly neglected, partially as a result of them being considered temporary solutions until sewer-based systems could be implemented. However, the perception of onsite or decentralized sanitation technologies for urban areas is gradually changing, and is increasingly being considered as long-term, sustainable options in urban areas, especially in low- and middle-income countries that lack sewer infrastructures. This is the first book dedicated to faecal sludge management. It compiles the current state of knowledge of the rapidly evolving field of faecal sludge management, and presents an integrated approach that includes technology, management, and planning based on Sandecs 20 years of experience in the field. Faecal Sludge Management: Systems Approach for Implementation and Operation addresses the organization of the entire faecal sludge management service chain, from the collection and transport of sludge, and the current state of knowledge of treatment options, to the final end use or disposal of treated sludge. The book also presents important factors to consider when evaluating and upscaling new treatment technology options. The book is designed for undergraduate and graduate students, and engineers and practitioners in the field who have some basic knowledge of environmental and/or wastewater engineering.
Download or read book Structural Rehabilitation of Old Buildings written by Aníbal Costa and published by Springer Science & Business Media. This book was released on 2013-09-11 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This present book describes the different construction systems and structural materials and elements within the main buildings typologies, and it analyses the particularities of each of them, including, at the end, general aspects concerning laboratory and in-situ testing, numerical modeling, vulnerability assessment and construction maintenance.
Download or read book Microplastics in Water and Wastewater written by Hrissi K. Karapanagioti and published by IWA Publishing. This book was released on 2019-09-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the topic of microplastics in water and wastewater. The chapters start with introductory issues related to the growing interest in the scientific community on microplastics and the human water cycle and point out where the microplastics could interact with water. The subsequent chapters examine evidence of the microplastic presence in freshwater, such as in both rivers and lakes, in freshwater biota, and hazardous chemicals associated with microplastics in such systems. Another set of chapters discuss the presence of microplastics in wastewater: their sources; their transfer through a wastewater treatment plant; the concentration of microplastics in effluents throughout the world; the plastic biomedia used in wastewater treatment plants and the effect on the surrounding environment of effluent wastewater pipes. These chapters also discuss the sampling methods, the sample treatment and analysis techniques used so far for microplastics in wastewater. Additionally, the presence of microplastics in sewage sludge and in soils irrigated with wastewater or fertilized with sludge are discussed. The possible impact of plastics and their additives on plants, microalgae, and humans are reviewed and presented in a critical way. Finally, a chapter summarizes all the relevant regulations and initiatives that point to the necessity of a global directive for the protection of the environment from plastic and microplastic pollution. The topic of microplastics in freshwater systems and in wastewater has scarcely been studied and requires more attention. Microplastics in Water and Wastewater aims to bring these initial findings to the attention of a broader audience and especially to operators and managers of freshwater and wastewater systems. It will also be helpful to people already aware of the marine debris problem to understand the sources of microplastics in the oceans, from freshwater systems and wastewater treatment plants.
Download or read book Proceedings of the 28th International Symposium on Mine Planning and Equipment Selection MPES 2019 written by Erkan Topal and published by Springer Nature. This book was released on 2019-11-29 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings presents the research papers in the field of mine planning and mining equipment including themes such as mine automation, rock mechanics, drilling, blasting, tunnelling and excavation engineering. The papers presents the recent advancement and the application of a range of technologies in the field of mining industry. It is of interest to the professionals who practice in mineral industry including but not limited to engineers, consultants, managers, academics, scientist, and government staff.
Download or read book Object Based Image Analysis written by Thomas Blaschke and published by Springer Science & Business Media. This book was released on 2008-08-09 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together a collection of invited interdisciplinary persp- tives on the recent topic of Object-based Image Analysis (OBIA). Its c- st tent is based on select papers from the 1 OBIA International Conference held in Salzburg in July 2006, and is enriched by several invited chapters. All submissions have passed through a blind peer-review process resulting in what we believe is a timely volume of the highest scientific, theoretical and technical standards. The concept of OBIA first gained widespread interest within the GIScience (Geographic Information Science) community circa 2000, with the advent of the first commercial software for what was then termed ‘obje- oriented image analysis’. However, it is widely agreed that OBIA builds on older segmentation, edge-detection and classification concepts that have been used in remote sensing image analysis for several decades. Nevert- less, its emergence has provided a new critical bridge to spatial concepts applied in multiscale landscape analysis, Geographic Information Systems (GIS) and the synergy between image-objects and their radiometric char- teristics and analyses in Earth Observation data (EO).
Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.
