Download or read book Hydrostatic Lubrication written by R. Bassani and published by Elsevier. This book was released on 1992-08-20 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrostatic lubrication is characterized by the complete separation of the conjugated surfaces of a kinematic pair, by means of a film of fluid, which is pressurized by an external piece of equipment. Its distinguishing features are lack of wear, low friction, high load capacity, a high degree of stiffness and the ability to damp vibrations.This book reviews the study of externally pressurized lubrication, both from the theoretical and the technical point of view, thereby serving the needs of both researchers as well as students and technical designers. In this connection, design suggestions for the most common types of hydrostatic bearings have been included, as well as a number of examples. A comprehensive bibliography is included with each chapter providing up to date references for more in depth coverage.
Download or read book Encyclopedia of Lubricants and Lubrication written by Theo Mang and published by Springer. This book was released on 2014-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes.
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by CRC Press. This book was released on 2004-03-15 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically focusing on fluid film, hydrodynamic, and elastohydrodynamic lubrication, this edition studies the most important principles of fluid film lubrication for the correct design of bearings, gears, and rolling operations, and for the prevention of friction and wear in engineering designs. It explains various theories, procedures, and equations for improved solutions to machining challenges. Providing more than 1120 display equations and an introductory section in each chapter, Fundamentals of Fluid Film Lubrication, Second Edition facilitates the analysis of any machine element that uses fluid film lubrication and strengthens understanding of critical design concepts.
Download or read book Applied Tribology written by Michael M. Khonsari and published by John Wiley & Sons. This book was released on 2017-08-01 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insightful working knowledge of friction, lubrication, and wear in machines Applications of tribology are widespread in industries ranging from aerospace, marine and automotive to power, process, petrochemical and construction. With world-renowned expert co-authors from academia and industry, Applied Tribology: Lubrication and Bearing Design, 3rd Edition provides a balance of application and theory with numerous illustrative examples. The book provides clear and up-to-date presentation of working principles of lubrication, friction and wear in vital mechanical components, such as bearings, seals and gears. The third edition has expanded coverage of friction and wear and contact mechanics with updated topics based on new developments in the field. Key features: Includes practical applications, homework problems and state-of-the-art references. Provides presentation of design procedure. Supplies clear and up-to-date information based on the authors’ widely referenced books and over 500 archival papers in this field. Applied Tribology: Lubrication and Bearing Design, 3rd Edition provides a valuable and authoritative resource for mechanical engineering professionals working in a wide range of industries with machinery including turbines, compressors, motors, electrical appliances and electronic components. Senior and graduate students in mechanical engineering will also find it a useful text and reference.
Download or read book Hydrodynamic Lubrication written by J. Frene and published by Elsevier. This book was released on 1997-11-10 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamic Lubrication is the culmination of over 20 years close, collaborative work by the five authors and discusses the practical use of the formalization of low pressure lubrication. The work concentrates on the developments to journal and thrust bearings and includes subjects such as: • the dynamic behaviour of plain and tilting-pads • the thermal aspects • the positive and negative effects of non-cyclindricity and shape defects resulting from manufacturing or operation • the effects of inertia • the appearance of Taylor's vortices and of turbulence and their repercussions. The book contains an abundance of test results objectively compared with theoretical conclusions and a chapter on "technical considerations" to ensure that draft mechanisms will work satisfactorily under the imposed conditions. Hydrodynamic Lubrication is an essential reference book for future and practising engineers who want to put hydrodynamic and hydrostatic journal bearings and thrust bearings into operation under conditions of total safety.
Download or read book Elasto Hydrodynamic Lubrication written by D. Dowson and published by Elsevier. This book was released on 2014-07-18 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented. Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussion on equations relevant to lubrication, including the Reynolds equation. The reader is then introduced to lubrication of rigid cylinders; the importance of film thickness in highly loaded rigid contacts; the elasticity of solids in contact; and the theory of elasto-hydrodynamic lubrication. Subsequent chapters focus on apparatus and measurements of film thickness and film shape; friction and viscosity; and lubrication of gears and roller bearings. This book will be of interest to tribologists.
Download or read book Hydrodynamic and Hydrostatic Lubricated Bearings with Particular Reference to Air Bearings written by M. A. Koenders and published by . This book was released on 1958 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Engineering Tribology with Applications written by Harish Hirani and published by Cambridge University Press. This book was released on 2016-03-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is related to friction, wear and lubrication of machine elements. Tribology not only deals with the design of fluid containment systems like seals and gasket but also with the lubrication of surfaces in relative motion. This book comprehensively discusses the theories and applications of hydrodynamic thrust bearing, gas (air) lubricated bearing and elasto-hydrodynamic lubrication. It elucidates the concepts related to friction, including coefficient of friction, friction instability and stick-slip motion. It clarifies the misconception that harder and cleaner surfaces produce better results in wear. Recent developments, including online condition monitoring (an integration of moisture sensor, wear debris and oil quality sensors) and multigrid technique, are discussed in detail. The book also offers design problems and their real-life applications for cams, followers, gears and bearings. MATLAB programs, frequently asked questions and multiple choice questions are interspersed throughout for easy understanding of the topics.
Download or read book Fluid Film Lubrication written by Andras Z. Szeri and published by Cambridge University Press. This book was released on 2010-12-27 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid film bearings are machine elements that should be studied within the broader context of tribology. The three subfields of tribology - friction, lubrication, and wear - are strongly interrelated. The last decade has witnessed significant advances in the area of fluid film lubrication and its applications, and this second edition offers a look at some of these advances. This edition adds to the fundamentals of fluid film lubrication, a discourse on surface effects and the inclusion of treatment of flow with significant inertia within the section on turbulence. Basic ideas of the multigrid method are conveyed along with multilevel multi-integration in the treatment of elastohydrodynamic lubrication. New chapters have been included on ultra-thin films, both liquid and gaseous, and lubrication of articulating joints and their replacement. Some of the most recent literature is discussed.
Download or read book Fundamentals of Fluid Film Lubrication written by Bernard J. Hamrock and published by NASA Office of Management Scientific a. This book was released on 1991 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CRC Handbook of Lubrication written by Robert W. Bruce and published by CRC Press. This book was released on 2010-12-12 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers the general area of lubrication and tribology in all its facets: friction, wear lubricants (liquid, solid, and gas), greases, lubrication principles, applications to various mechanisms, design principles of devices incorporating lubrication, maintenance, lubrication scheduling, and standardized tests; as well as environmental problems and conservation. The information contained in these two volumes will aid in achieving effective lubrication for control of friction and wear, and is another step to improve understanding of the complex factors involved in tribology. Both metric and English units are provided throughout both volumes.
Download or read book Tribology in Sheet Rolling Technology written by Akira Azushima and published by Springer. This book was released on 2015-10-05 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth description of the fundamental tribological aspects of cold and hot sheet rollings. The author describes new developments in the rolling processes, the rolling oils, the rolling rolls and the structural materials resulting from sheet rolling technology and their practical applications. The author includes comprehensive details on both friction and lubrication in rolling.
Download or read book Fundamentals of Fluid Film Lubrication written by Mihir Kumar Ghosh and published by McGraw Hill Professional. This book was released on 2014-06-20 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of fluid film lubrication Written by global experts in the field, this in-depth engineering resource discusses the theory, design, analysis, and application of fluid film lubrication, providing proven methods for reducing friction in rotating machinery components. The book thoroughly addresses all aspects of the topic, from viscosity and rotor-bearing dynamics to elastohydrodynamic lubrication and fluid inertia effects. Fully worked examples, analytical and numerical methods of solutions, practice problems, and detailed illustrations are included in this authoritative reference. Fundamentals of Fluid Film Lubrication covers: Introduction to tribology Viscosity and rheology of lubricants Mechanics of lubricant films and basic equations Hydrodynamic lubrication Finite bearings Thermohydrodynamic analysis of fluid film bearings Design of hydrodynamic bearings Dynamics of fluid film bearings Externally pressurized lubrication Fluid inertia effects and turbulence in fluid film lubrication Gas-lubricated bearings Hydrodynamic lubrication of rolling contacts Elastohydrodynamic lubrication Vibration analysis with lubricated ball bearings Thermal effect in rolling–sliding contacts
Download or read book Lubrication Fundamentals Revised and Expanded written by Don M. Pirro and published by CRC Press. This book was released on 2017-07-31 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Careful selection of the right lubricant(s) is required to keep a machine running smoothly. Lubrication Fundamentals, Third Edition, Revised and Expanded describes the need and design for the many specialized oils and greases used to lubricate machine elements and builds on the tribology and lubrication basics discussed in previous editions. Utilizing knowledge from leading experts in the field, the third edition covers new lubrication requirements, crude oil composition and selection, base stock manufacture, lubricant formulation and evaluation, machinery and lubrication fundamentals, and environmental stewardship. The book combines lubrication theory with practical knowledge, and provides many useful illustrations to highlight key industrial, commercial, marine, aviation, and automotive lubricant applications and concepts. All previous edition chapters have been updated to include new technologies, applications, and specifications that have been introduced in the past 15 years. What’s New in the Third Edition: Adds three new chapters on the growing renewable energy application of wind turbines, the impact of lubricants on energy efficiency, and best practice guidelines on establishing an in-service lubricant analysis program Updates API, SAE, and ACEA engine oil specifications, descriptions of new engine oil tests, impact of engine and fuel technology trends on engine oil Includes the latest environmental lubricant tests, definitions, and labelling programs Compiles expert information from ExxonMobil publications and the foremost international equipment builders and industry associations Covers key influences impacting lubricant formulations and technology Offers data on global energy demand and interesting statistics such as the worldwide population of nuclear reactors, wind turbines, and output of hydraulic turbines Presents new sections on the history of synthetic lubricants and hazardous chemical labeling for lubricants Whether used as a training guide for industry novices, a textbook for students to understand lubrication principles, or a technical reference for experienced lubrication and tribology professionals, Lubrication Fundamentals, Third Edition, Revised and Expanded is a "must read" for maintenance professionals, lubricant formulators and marketers, chemists, and lubrication, surface, chemical, mechanical, and automotive engineers.
Download or read book Engineering Tribology written by Gwidon Stachowiak and published by Butterworth-Heinemann. This book was released on 2013-09-16 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Tribology, Fourth Edition is an established introductory reference focusing on the key concepts and engineering implications of tribology. Taking an interdisciplinary view, the book brings together the relevant knowledge from different fields needed to achieve effective analysis and control of friction and wear. Updated to cover recent advances in tribology, this new edition includes new sections on ionic and mesogenic lubricants, surface texturing, and multiscale characterization of 3D surfaces and coatings. Current trends in nanotribology are discussed, such as those relating to lubricants, coatings and composites, and geotribology is introduced. Suitable as an introductory text, a refresher or an on-the-job reference, Engineering Tribology, 4th Edition is intended for final year undergraduate and postgraduate students in mechanical engineering as well as professional engineers. It is also relevant to those working in materials engineering, applied chemistry, physics and bioengineering. - Offers a comprehensive overview of the mechanisms of wear, lubrication and friction in an accessible manner designed to aid novice engineers, non-specialists and students - Provides a reader-friendly approach to the subject using illustrations to break down the typically complex problems associated with tribology - Includes end-of-chapter problems to test understanding
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book Lubricants and Lubrication written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-02-10 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
