Download or read book Hydrogen Embrittlement Revisited by in Situ Electrochemical Nanoindentation written by Afrooz Barnoush and published by . This book was released on 2009-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by John H. Jackson and published by Springer. This book was released on 2018-12-20 with total page 2532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.
Download or read book Multiscale Modeling of Heterogeneous Structures written by Jurica Sorić and published by Springer. This book was released on 2017-11-30 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of multiscale approaches and homogenization procedures as well as damage evaluation and crack initiation, and addresses recent advances in the analysis and discretization of heterogeneous materials. It also highlights the state of the art in this research area with respect to different computational methods, software development and applications to engineering structures. The first part focuses on defects in composite materials including their numerical and experimental investigations; elastic as well as elastoplastic constitutive models are considered, where the modeling has been performed at macro- and micro levels. The second part is devoted to novel computational schemes applied on different scales and discusses the validation of numerical results. The third part discusses gradient enhanced modeling, in particular quasi-brittle and ductile damage, using the gradient enhanced approach. The final part addresses thermoplasticity, solid-liquid mixtures and ferroelectric models. The contents are based on the international workshop “Multiscale Modeling of Heterogeneous Structures” (MUMO 2016), held in Dubrovnik, Croatia in September 2016.
Download or read book Sensors for Safety and Process Control in Hydrogen Technologies written by Thomas Hübert and published by CRC Press. This book was released on 2018-10-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand, Select, and Design Sensors for Hydrogen-Based Applications The use of hydrogen generated from renewable energy sources is expected to become an essential component of a low-carbon, environmentally friendly energy supply, spurring the worldwide development of hydrogen technologies. Sensors for Safety and Process Control in Hydrogen Technologies provides practical, expert-driven information on modern sensors for hydrogen and other gases as well as physical parameters essential for safety and process control in hydrogen technologies. It illustrates how sensing technologies can ensure the safe and efficient implementation of the emerging global hydrogen market. The book explains the various facets of sensor technologies, including practical aspects relevant in hydrogen technologies. It presents a comprehensive and up-to-date account of the theory (physical and chemical principles), design, and implementations of sensors in hydrogen technologies. The authors also offer guidance on the development of new sensors based on the analysis of the capabilities and limitations of existing sensors with respect to current performance requirements. Suitable for both technical and non-technical personnel, the book provides a balance between detailed descriptions and simple explanations. It gives invaluable insight into the role sensors play as key enabling devices for both control and safety in established and emerging hydrogen technologies.
Download or read book Electrochemical Hydrogen and Metals written by Sergei Beloglazov and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical hydrogen evolves both in the cathodic process of corrosion on the interface aqueous solution of electrolyte / Me (steel) and in the cathodic processes of Me (Zn, Cd, Ni, Cr, Sn, Cu, etc) electrodeposition for steel corrosion protection. Absorption of the part of cathodic discharged hydrogen deteriorates all mechanical properties of metal and results in hydrogen embrittlement. During the last three decades, many works on research of systems H-Me have been published and the new materials extremely sensitive to hydrogen fragility have appeared. This new and important book reviews research results concerning the influence of organic brightening compounds on steel hydrogen embrittlement at electrodeposition of the above mentioned metals.
Download or read book Electrochemical Hydrogen and Metals written by Sergeĭ Mikhaĭlovich Beloglazov and published by Nova Science Publishers. This book was released on 2014-05-22 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen Degradation of Ferrous Alloys written by Richard A. Oriani and published by William Andrew. This book was released on 1985 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passivation of Metals and Semiconductors and Properties of Thin Oxide Layers written by Philippe Marcus and published by Elsevier. This book was released on 2006-05-25 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passivation of Metals and Semiconductors, and Properties of Thin Oxide Layers contains a selection of papers presented at PASSIVITY-9, the 9th International Symposium on the Passivation of Metals and Semiconductors and the Properties of Thin Oxide Layers, which was held in Paris, 27 June - 1 July, 2005. One hundred and twelve peer-reviewed manuscripts have been included. The book covers all the fundamental and applied aspects of passivity and provides a relevant and updated view of the advances and new trends in the field. It is structured in ten sections: • Growth, (Nano)structure and Composition of Passive Films • Passivity of Semiconductors • Electronic Properties of Passive Films • Passivity Issues in Biological Systems • Passivity in High-Temperature Water • Mechanical Properties of Passive Films,• Passivity Issues in Stress Corrosion Cracking and Tribocorrosion • Passivity Breakdown and Localized Corrosion • Modeling and Simulation • Surface Modifications and Inhibitors (for Improved Corrosion Resistance and/or Adhesion)
Download or read book Stress Corrosion Cracking written by V S Raja and published by Elsevier. This book was released on 2011-09-22 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of stress corrosion cracking (SCC), which causes sudden failure of metals and other materials subjected to stress in corrosive environment(s), has a significant impact on a number of sectors including the oil and gas industries and nuclear power production. Stress corrosion cracking reviews the fundamentals of the phenomenon as well as examining stress corrosion behaviour in specific materials and particular industries. The book is divided into four parts. Part one covers the mechanisms of SCC and hydrogen embrittlement, while the focus of part two is on methods of testing for SCC in metals. Chapters in part three each review the phenomenon with reference to a specific material, with a variety of metals, alloys and composites discussed, including steels, titanium alloys and polymer composites. In part four, the effect of SCC in various industries is examined, with chapters covering subjects such as aerospace engineering, nuclear reactors, utilities and pipelines. With its distinguished editors and international team of contributors, Stress corrosion cracking is an essential reference for engineers and designers working with metals, alloys and polymers, and will be an invaluable tool for any industries in which metallic components are exposed to tension, corrosive environments at ambient and high temperatures. Examines the mechanisms of stress corrosion cracking (SCC) presenting recognising testing methods and materials resistant to SCC Assesses the effect of SCC on particular metals featuring steel, stainless steel, nickel-based alloys, magnesium alloys, copper-based alloys and welds in steels Reviews the monitoring and management of SCC and the affect of SCC in different industries such as petrochemical and aerospace
Download or read book Recent Developments in Analytical Techniques for Corrosion Research written by Ihsan ulhaq Toor and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of advanced analytical tools, from electrochemical to in-situ/ex-situ material characterization techniques, as well as the modeling of corrosion systems to foster understanding and prediction. When used properly, these tools can enrich our understanding of material performance (metallic materials, coatings, inhibitors) in various environments/contexts (aqueous corrosion, high-temperature corrosion). The book encourages researchers to develop new corrosion-resistant materials and supports them in devising suitable asset integrity strategies. Offering a valuable resource for researchers, industry professionals, and graduate students alike, the book shows them how to apply these valuable analytical tools in their work. .
Download or read book Electrochemical Methods of Nanostructure Preparation written by László Péter and published by Springer Nature. This book was released on 2021-04-24 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the electrochemical routes of nanostructure preparation in a systematic and didactic manner. It provides a comprehensive overview of electrodeposition, anodization, carbon nanotube preparation and other methods of nanostructure fabrication, combining essential information on the physical background of electrochemistry with materials science aspects of the field. The book includes a brief introduction to general electrochemistry with an emphasis on physico-chemical aspects, followed by a description of the sample preparation methods. In each chapter, an overview of the particular method is accompanied by a discussion of the relevant physical or chemical properties of the materials, including magnetic, mechanical, optical, catalytic, sensoric and other features. While some preparation methods are discussed in connection with the theories of physical electrochemistry (e.g. electrodeposition), the book also covers methods that are more heuristic but nonetheless utilize electric current (e.g. anodization of porous alumina or synthesis of carbon nanotubes by means of electric arc discharge).
Download or read book The Superalloys written by Roger C. Reed and published by Cambridge University Press. This book was released on 2008-07-31 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys are unique high-temperature materials used in gas turbine engines, which display excellent resistance to mechanical and chemical degradation. This book introduces the metallurgical principles which have guided their development. Suitable for graduate students and researchers, it includes exercises and additional resources at www.cambridge.org/9780521859042.
Download or read book THERMEC 2016 written by C. Sommitsch and published by Trans Tech Publications Ltd. This book was released on 2016-11-15 with total page 2720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9-th International Conference on Processing and Manufacturing of Advanced Materials THERMEC2016, which took place between May 29 and June 3, 2016 in Graz, Austria, under the co-sponsorship of The Minerals, Metals & Materials Society (TMS), USA. The Conference was also under the international auspices of professional organizations from Japan, Korea, France, Italy, The Netherlands, Germany, Brazil, Austria, India, and Canada. The Conference was intended to bring together the researchers and engineers/technologists working in different aspects of processing, fabrication, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, and smart/intelligent materials as well as the advanced characterisation techniques. In addition to the contributed papers, the conference committee included in the final program the invited presentations by active researchers from various countries in several topic areas covered at THERMEC2016.
Download or read book The Plaston Concept written by Isao Tanaka and published by Springer. This book was released on 2022-02-28 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents the novel concept of plaston, which accounts for the high ductility or large plastic deformation of emerging high-performance structural materials, including bulk nanostructured metals, hetero-nanostructured materials, metallic glasses, intermetallics, and ceramics.The book describes simulation results of the collective atomic motion associated with plaston, by computational tools such as first-principle methods with predictive performance and large-scale atom-dynamics calculations. Multi-scale analyses with state-of-the art analytical tools nano/micro pillar deformation and nano-indentation experiments are also described. Finally, through collaborative efforts of experimental and computational work, examples of rational design and development of new structural materials are given, based on accurate understanding of deformation and fracture phenomena.This publication provides a valuable contribution to the field of structural materials research.
Download or read book Gaseous Hydrogen Embrittlement of Materials in Energy Technologies written by Richard P Gangloff and published by Elsevier. This book was released on 2012-01-19 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many modern energy systems are reliant on the production, transportation, storage, and use of gaseous hydrogen. The safety, durability, performance and economic operation of these systems is challenged by operating-cycle dependent degradation by hydrogen of otherwise high performance materials. This important two-volume work provides a comprehensive and authoritative overview of the latest research into managing hydrogen embrittlement in energy technologies. Volume 2 is divided into three parts, part one looks at the mechanisms of hydrogen interactions with metals including chapters on the adsorption and trap-sensitive diffusion of hydrogen and its impact on deformation and fracture processes. Part two investigates modern methods of modelling hydrogen damage so as to predict material-cracking properties. The book ends with suggested future directions in science and engineering to manage the hydrogen embrittlement of high-performance metals in energy systems. With its distinguished editors and international team of expert contributors, Volume 2 of Gaseous hydrogen embrittlement of materials in energy technologies is an invaluable reference tool for engineers, designers, materials scientists, and solid mechanicians working with safety-critical components fabricated from high performance materials required to operate in severe environments based on hydrogen. Impacted technologies include aerospace, petrochemical refining, gas transmission, power generation and transportation. Summarises the wealth of recent research on understanding and dealing with the safety, durability, performance and economic operation of using gaseous hydrogen at high pressure Chapters review mechanisms of hydrogen embrittlement including absorption, diffusion and trapping of hydrogen in metals Analyses ways of modelling hydrogen-induced damage and assessing service life
Download or read book THERMEC 2018 written by R. Shabadi and published by Trans Tech Publications Ltd. This book was released on 2018-12-26 with total page 2604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the THERMEC2018: 10th International Conference on Processing and Manufacturing of Advanced Materials, which took place between July 09 and July 13, 2018 in Paris, France, under the co-sponsorship of Universite de Lille, MINES ParisTech, PSL and Universite de Tours, France. The presented book will be useful for many researchers and engineers/technologists working in different aspects of processing and fabrication of materials, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, smart materials as well as the advanced measurement techniques in the materials science.
Download or read book Localized Corrosion written by Fumio Hine and published by . This book was released on 1988 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
