Download or read book Human Barrier Design and Lifecycle written by Tom Shephard and published by CRC Press. This book was released on 2024-05-07 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: A common source of failure in a human‐dependent barrier or safety critical task is a designed‐in mismatch error. The mismatch is a cognitive demand that exceeds the human capability to reliably and promptly respond to that demand given the plausible situations at that moment. Demand situations often include incomplete information, increased time pressures, and challenging environments. This book presents innovative solutions to reveal, prevent, and mitigate these and many other cognitive‐type errors in barriers and safety critical tasks. The comprehensive model and methodologies also provide insight into where and to what extent these barriers and task types may be significantly underspecified and the potential consequences. This title presents a new and comprehensive prototype design and lifecycle model specific to human‐dependent barriers and safety critical tasks. Designed to supplement current practice, the model is fully underpinned by cognitive ergonomics and cognitive science. The book also presents a compelling case for why a new global consensus standard specific to human‐dependent barriers is needed. Taking a novel approach, it presents its suggested basis, framing, and content. Both solutions seek to redress deficiencies in global regulations, standards, and practice. The model is guided by industry recommendations and best practice guidance and solutions from globally recognized experts. Its processes are fully explained and supported by examples, analysis, and well‐researched background materials. Real‐life case studies from offshore oil and gas, chemical manufacturing, transmission pipelines, and product storage provide further insight into how overt and latent design errors contributed to barrier degradation and failure and the consequence of those errors. An essential and fascinating read for professionals, Human Barrier Design and Lifecycle: A Cognitive Ergonomics Approach and Path Forward will appeal to those in the fields of human factors, process and technical safety, functional safety, display and safety system design, risk management, facility engineering, and facility operations and maintenance. Chapters 1 and 8 of this book are freely available as downloadable Open Access PDFs at http://www.taylorfrancis.com under a Creative Commons Attribution-Non Commercial-No Derivatives (CC-BYNC-ND) 4.0 International license.
Download or read book A Guide To Task Analysis written by B Kirwan and published by CRC Press. This book was released on 2003-09-02 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work shows readers how to target task analysis TA resources effectively over the life cycle of a project from conceptual design Through To Systems Operation, Noting The Role Of TA In Safety And Quality assurance, minimizing operator error,
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses written by Shozo Takata and published by Springer Science & Business Media. This book was released on 2007-07-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life cycle engineering explores technologies for shifting industry from mass production and consumption paradigms to closed-loop manufacturing paradigms, in which required functions are provided with the minimum amount of production. This subject is discussed from various aspects: life cycle design, design for environment, reduce-reuse-recycle, life cycle assessment, and sustainable business models. This book collects papers from the 14th International CIRP Life Cycle Engineering Conference, the longest-running annual meeting in the field.
Download or read book Engineering Life Cycle Cost Comparison Study of Barrier Fencing Systems written by and published by DIANE Publishing. This book was released on 1999 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Immigration and Naturalization Service (INS) is responsible for the administration and enforcement of U.S. immigration laws. Enforcement mainly involves apprehending illegal immigrants and assisting with the interdiction of illegal drug smugglers and suspected terrorists. The United States has approximately 6,000 miles of land-based international border. By far the largest problem with illegal immigration occurs along the 2,000 miles of border with Mexico. Along this border, nearly 90 percent of the apprehensions occur along 200 miles distributed near nine major U.S. cities and towns such as San Diego, CA, and El Paso, TX. Current fencing, where it exists, is often in a severe state of disrepair. To cost effectively increase deterrence against illegal entry, the INS is considering the widespread application of several different fencing systems for these high traffic areas. Little to no detailed engineering-based comparisons have been made for these fencing options so no basis currently exists with which to make an informed decision based on reliability, effectiveness of deterrence, economics, and ability to withstand attack. This report discusses analyses of several fencing system options that would provide both effective and minimum life-cycle cost service for primary, secondary, and tertiary barrier needs.
Download or read book Product Lifecycle Management PLM in Transition Times The Place of Humans and Transformative Technologies written by Frédéric Noël and published by Springer Nature. This book was released on 2023-01-31 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 19th IFIP WG 5.1 International Conference, PLM 2022, Grenoble, France, July 10–13, 2022, Revised Selected Papers. The 67 full papers included in this book were carefully reviewed and selected from 94 submissions. They were organized in topical sections as follows: Organisation: Knowledge Management, Business Models, Sustainability, End-to-End PLM, Modelling tools: Model-Based Systems Engineering, Geometric modelling, Maturity models, Digital Chain Process, Transversal Tools: Artificial Intelligence, Advanced Visualization and Interaction, Machine learning, Product development: Design Methods, Building Design, Smart Products, New Product Development, Manufacturing: Sustainable Manufacturing, Lean Manufacturing, Models for Manufacturing.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1980 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Technology Project Summaries written by and published by . This book was released on 1980 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Technology Publications written by Center for Building Technology and published by . This book was released on 1980 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Bureau of Standards 1979 Catalog written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Glocalized Solutions for Sustainability in Manufacturing written by Jürgen Hesselbach and published by Springer Science & Business Media. This book was released on 2011-03-19 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.
Download or read book Marine Design XIII written by Pentti Kujala and published by CRC Press. This book was released on 2018-06-11 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Design XIII collects the contributions to the 13th International Marine Design Conference (IMDC 2018, Espoo, Finland, 10-14 June 2018). The aim of this IMDC series of conferences is to promote all aspects of marine design as an engineering discipline. The focus is on key design challenges and opportunities in the area of current maritime technologies and markets, with special emphasis on: • Challenges in merging ship design and marine applications of experience-based industrial design • Digitalisation as technological enabler for stronger link between efficient design, operations and maintenance in future • Emerging technologies and their impact on future designs • Cruise ship and icebreaker designs including fleet compositions to meet new market demands To reflect on the conference focus, Marine Design XIII covers the following research topic series: •State of art ship design principles - education, design methodology, structural design, hydrodynamic design; •Cutting edge ship designs and operations - ship concept design, risk and safety, arctic design, autonomous ships; •Energy efficiency and propulsions - energy efficiency, hull form design, propulsion equipment design; •Wider marine designs and practices - navy ships, offshore and wind farms and production. Marine Design XIII contains 2 state-of-the-art reports on design methodologies and cruise ships design, and 4 keynote papers on new directions for vessel design practices and tools, digital maritime traffic, naval ship designs, and new tanker design for arctic. Marine Design XIII will be of interest to academics and professionals in maritime technologies and marine design.
Download or read book Assessment of the Performance of Engineered Waste Containment Barriers written by National Research Council and published by National Academies Press. This book was released on 2007-09-22 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: President Carter's 1980 declaration of a state of emergency at Love Canal, New York, recognized that residents' health had been affected by nearby chemical waste sites. The Resource Conservation and Recovery Act, enacted in 1976, ushered in a new era of waste management disposal designed to protect the public from harm. It required that modern waste containment systems use "engineered" barriers designed to isolate hazardous and toxic wastes and prevent them from seeping into the environment. These containment systems are now employed at thousands of waste sites around the United States, and their effectiveness must be continually monitored. Assessment of the Performance of Engineered Waste Containment Barriers assesses the performance of waste containment barriers to date. Existing data suggest that waste containment systems with liners and covers, when constructed and maintained in accordance with current regulations, are performing well thus far. However, they have not been in existence long enough to assess long-term (postclosure) performance, which may extend for hundreds of years. The book makes recommendations on how to improve future assessments and increase confidence in predictions of barrier system performance which will be of interest to policy makers, environmental interest groups, industrial waste producers, and industrial waste management industry.
Download or read book Bow Ties in Risk Management written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-09-11 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: AN AUTHORITATIVE GUIDE THAT EXPLAINS THE EFFECTIVENESS AND IMPLEMENTATION OF BOW TIE ANALYSIS, A QUALITATIVE RISK ASSESSMENT AND BARRIER MANAGEMENT METHODOLOGY From a collaborative effort of the Center for Chemical Process Safety (CCPS) and the Energy Institute (EI) comes an invaluable book that puts the focus on a specific qualitative risk management methodology – bow tie barrier analysis. The book contains practical advice for conducting an effective bow tie analysis and offers guidance for creating bow tie diagrams for process safety and risk management. Bow Ties in Risk Management clearly shows how bow tie analysis and diagrams fit into an overall process safety and risk management framework. Implementing the methods outlined in this book will improve the quality of bow tie analysis and bow tie diagrams across an organization and the industry. This important guide: Explains the proven concept of bow tie barrier analysis for the preventing and mitigation of incident pathways, especially related to major accidents Shows how to avoid common pitfalls and is filled with real-world examples Explains the practical application of the bow tie method throughout an organization Reveals how to treat human and organizational factors in a sound and practical manner Includes additional material available online Although this book is written primarily for anyone involved with or responsible for managing process safety risks, this book is applicable to anyone using bow tie risk management practices in other safety and environmental or Enterprise Risk Management applications. It is designed for a wide audience, from beginners with little to no background in barrier management, to experienced professionals who may already be familiar with bow ties, their elements, the methodology, and their relation to risk management. The missions of both the CCPS and EI include developing and disseminating knowledge, skills, and good practices to protect people, property and the environment by bringing the best knowledge and practices to industry, academia, governments and the public around the world through collective wisdom, tools, training and expertise. The CCPS has been at the forefront of documenting and sharing important process safety risk assessment methodologies for more than 30 years. The EI's Technical Work Program addresses the depth and breadth of the energy sector, from fuels and fuels distribution to health and safety, sustainability and the environment. The EI program provides cost-effective, value-adding knowledge on key current and future international issues affecting those in the energy sector.
Download or read book Life Cycle Analysis and Assessment in Civil Engineering Towards an Integrated Vision written by Robby Caspeele and published by CRC Press. This book was released on 2018-10-31 with total page 3160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at IALCCE2018, the Sixth International Symposium on Life-Cycle Civil Engineering (IALCCE2018), held in Ghent, Belgium, October 28-31, 2018. It consists of a book of extended abstracts and a USB device with full papers including the Fazlur R. Khan lecture, 8 keynote lectures, and 390 technical papers from all over the world. Contributions relate to design, inspection, assessment, maintenance or optimization in the framework of life-cycle analysis of civil engineering structures and infrastructure systems. Life-cycle aspects that are developed and discussed range from structural safety and durability to sustainability, serviceability, robustness and resilience. Applications relate to buildings, bridges and viaducts, highways and runways, tunnels and underground structures, off-shore and marine structures, dams and hydraulic structures, prefabricated design, infrastructure systems, etc. During the IALCCE2018 conference a particular focus is put on the cross-fertilization between different sub-areas of expertise and the development of an overall vision for life-cycle analysis in civil engineering. The aim of the editors is to provide a valuable source of cutting edge information for anyone interested in life-cycle analysis and assessment in civil engineering, including researchers, practising engineers, consultants, contractors, decision makers and representatives from local authorities.
