Download or read book Slurry Flow written by C A Shook and published by Elsevier. This book was released on 2013-10-22 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slurry Flow: Principles and Practice describes the basic concepts and methods for understanding and designing slurry flow systems, in-plan installations, and long-distance transportation systems. The goal of this book is to enable the design or plant engineer to derive the maximum benefit from a limited amount of test data and to generalize operating experience to new situations. Design procedures are described in detail and are accompanied by illustrative examples needed by engineers with little or no previous experience in slurry transport. The technical literature in this field is extensive: this book facilitates its use by surveying current research results and providing explanations of mechanistic flow models. This discussion of background scientific principles helps the practitioner to better interpret test data, select pumps, specify materials of construction, and choose measuring devises for slurry transport systems. The extensive range of topics covered in Slurry Flow: Principles and practice includes slurry rheology, homogeneous and heterogeneous slurry flow principles, wear mechanisms, pumping equipment, instrumentation, and operating aspects.
Download or read book Coulson and Richardson s Chemical Engineering written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 2017-11-28 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coulson and Richardson's Chemical Engineering has been fully revised and updated to provide practitioners with an overview of chemical engineering. Each reference book provides clear explanations of theory and thorough coverage of practical applications, supported by case studies. A worldwide team of editors and contributors have pooled their experience in adding new content and revising the old. The authoritative style of the original volumes 1 to 3 has been retained, but the content has been brought up to date and altered to be more useful to practicing engineers. This complete reference to chemical engineering will support you throughout your career, as it covers every key chemical engineering topic.Coulson and Richardson's Chemical Engineering: Volume 1A: Fluid Flow: Fundamentals and Applications, Seventh Edition, covers momentum transfer (fluid flow) which is one of the three main transport processes of interest to chemical engineers. - Covers momentum transfer (fluid flow) which is one of the three main transport processes of interest to chemical engineers - Includes reference material converted from textbooks - Explores topics, from foundational through technical - Includes emerging applications, numerical methods, and computational tools
Download or read book Pipeline Rules of Thumb Handbook written by E.W. McAllister and published by Gulf Professional Publishing. This book was released on 2015-06-02 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic reference has built a reputation as the "go to" book to solve even the most vexing pipeline problems. Now in its seventh edition, Pipeline Rules of Thumb Handbook continues to set the standard by which all others are judged. The 7th edition features over 30% new and updated sections, reflecting the exponential changes in the codes, construction and equipment since the sixth edition. The seventh edition includes: recommended drill sizes for self-tapping screws, new ASTM standard reinforcing bars, calculations for calculating grounding resistance, national Electrical Code tables, Corilis meters, pump seals, progressive cavity pumps and accumulators for lubricating systems. * Shortcuts for pipeline construction, design, and engineering * Calculations methods and handy formulas * Turnkey solutions to the most vexing pipeline problems
Download or read book Proceedings of the 6th International Conference on Industrial Engineering ICIE 2020 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2021-03-26 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 6th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in May 2020. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Fundamentals of Fluid Mechanics written by Joseph A. Schetz and published by John Wiley & Sons. This book was released on 1999 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic fluid dynamic theory and applications in a single, authoritative reference The growing capabilities of computational fluid dynamics and the development of laser velocimeters and other new instrumentation have made a thorough understanding of classic fluid theory and laws more critical today than ever before. Fundamentals of Fluid Mechanics is a vital repository of essential information on this crucial subject. It brings together the contributions of recognized experts from around the world to cover all of the concepts of classical fluid mechanics-from the basic properties of liquids through thermodynamics, flow theory, and gas dynamics. With answers for the practicing engineer and real-world insights for the student, it includes applications from the mechanical, civil, aerospace, chemical, and other fields. Whether used as a refresher or for first-time learning, Fundamentals of Fluid Mechanics is an important new asset for engineers and students in many different disciplines.
Download or read book Fundamentals of Two Fluid Dynamics written by Daniel D. Joseph and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-fluid dynamics is a challenging subject rich in physics and prac tical applications. Many of the most interesting problems are tied to the loss of stability which is realized in preferential positioning and shaping of the interface, so that interfacial stability is a major player in this drama. Typically, solutions of equations governing the dynamics of two fluids are not uniquely determined by the boundary data and different configurations of flow are compatible with the same data. This is one reason why stability studies are important; we need to know which of the possible solutions are stable to predict what might be observed. When we started our studies in the early 1980's, it was not at all evident that stability theory could actu ally work in the hostile environment of pervasive nonuniqueness. We were pleasantly surprised, even astounded, by the extent to which it does work. There are many simple solutions, called basic flows, which are never stable, but we may always compute growth rates and determine the wavelength and frequency of the unstable mode which grows the fastest. This proce dure appears to work well even in deeply nonlinear regimes where linear theory is not strictly valid, just as Lord Rayleigh showed long ago in his calculation of the size of drops resulting from capillary-induced pinch-off of an inviscid jet.
Download or read book Modelling and Experimentation in Two Phase Flow written by Volfango Bertola and published by Springer. This book was released on 2014-05-04 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Download or read book Multiphase Flow Metering written by Gioia Falcone and published by Elsevier. This book was released on 2009-11-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors' strong background on multiphase flow and by practical examples. These are based on the authors' direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students.* Written by leading scholars and industry experts of international standing* Includes strong coverage of the theoretical background, yet also provides practical examples and current developments* Provides practical reference for professionals, students and academics
Download or read book Fundamentals of Multiphase Flow written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2005-04-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Multiphase Science and Technology written by G.F. Hewitt and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of Multiphase Science and TechnoJogy, a new international series of books intended to provide authoritative overviews of im portant areas in multiphase systems. The alm is to have systematic and tutorial presentations of the state of knowledge in various areas. The objective of the chapters is to allow the nonspecialist reader to gain an up-to-date idea of the present state of development in a given subject. The response to Volume 1 of the se ries has been very positive, and we believe that the present volume will be equally weil received. Volume 1 was concerned entirely with gas-liquid systems, and the first four chapters of the present volume also relate to such systems. However, the inten tion of the se ries is to cover a wide range of multiphase systems, and we are, therefore, pleased to include in the present volume chapters that refer to liquid liquid and gas-solid multiphase flows, respectively. The first chapter in the present volume is by Professor A. E. Dukler of the University of Houston, Texas, and Professor Y. Taitel of Tel-Aviv University, Israel.
Download or read book Journal of Chemical Engineering of Japan written by and published by . This book was released on 2008 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes abstracts of Kagaku kōgaku, v. 31-
Download or read book The Canadian Journal of Chemical Engineering written by and published by . This book was released on 2008-08 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Multi fluid Flows written by Yuriko Y. Renardy and published by SIAM. This book was released on 1996-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers from this conference deal with multi-fluid flows and interfacial instabilities. Papers on multiple-layer convection, wave dynamics in viscous flows, stability of viscoelastic flows, numberical computation of bubbles, and solidification are included.
Download or read book Official Gazette of the United States Patent and Trademark Office written by United States. Patent and Trademark Office and published by . This book was released on 1994-02 with total page 1750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waves And Stability In Continuous Media Proceedings Of The Vth International Meeting written by Salvatore Rionero and published by World Scientific. This book was released on 1991-03-29 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the rapid growth in both experimental and theoretical studies of multiphoton processes and multiphoton spectroscopy of atoms, ions and molecules in many interdisciplinary fields, an Advanced Series that contains review papers readable not only to active researchers in these areas but also to those who are not experts in the field but intend to enter the field is very necessary. This series attempts to serve this purpose. Each review article is written in a self-contained manner by the experts in the area so that the readers can grasp the knowledge in the area without too much preparation. The collection of topics in this volume will prove useful, valuable and stimulating not only to active researchers but also to other scientists in the areas of biology, chemistry, materials science and physics.
Download or read book Annular Two Phase Flow written by Geoffrey Hewitt and published by Elsevier. This book was released on 2013-10-22 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annular Two-Phase Flow presents the wide range of industrial applications of annular two-phase flow regimes. This book discusses the fluid dynamics and heat transfer aspects of the flow pattern. Organized into 12 chapters, this book begins with an overview of the classification of the various types of interface distribution observed in practice. This text then examines the various regimes of two-phase flow with emphasis on the regions of occurrence of the annular flow regime. Other chapters consider the single momentum and energy balances, which illustrate the differences and analogies between single- and two-phase flows. This book discusses as well the simple modes for annular flow with consideration to the calculation of the profile of shear stress in the liquid film. The final chapter deals with the techniques that are developed for the measurement of flow pattern, entrainment, and film thickness. This book is a valuable resource for chemical engineers.
Download or read book Particulate Two phase Flow written by M. C. Roco and published by Butterworth-Heinemann. This book was released on 1993 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of 28 contributions on basic phenomena and advanced methods of investigation for particulate two-phase flow. Written by leading scientists in the field, this book covers new measurement methods, experimental results on particulate two-phase flow microstructure at low and large Reynolds numbers, micromechanical, probabilistic, and numerical simulations, as well as production of ultrafine particles via aerosols and colloids for materials with controlled microstructure. Each chapter is focused on the qualitative progress made in the field in the last several years and has an extensive review section and original results. This unique volume assembles information previously found only in journals and specialized publications. It is an invaluable reference for researchers and engineers from academia and industry.
