Download or read book High temperature Structural Materials written by Robert Cahn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional materials, such as nickel based alloys, will not be able to match the required performance specifications for the future generation of high temperature materials. This book reviews the characteristics and potential of a wide range of candidate superalloy replacements, such as ceramics, intermetallics, and their composites. Particular attention is devoted to the problems of processing and design with these materials.
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Advances in High Temperature Structural Materials and Protective Coatings written by A. K. Koul and published by Institute for Aerospace Research. This book was released on 1994 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling High Temperature Materials Behavior for Structural Analysis written by Konstantin Naumenko and published by Springer. This book was released on 2016-05-11 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents approaches to characterize inelastic behavior of materials and structures at high temperature. Starting from experimental observations, it discusses basic features of inelastic phenomena including creep, plasticity, relaxation, low cycle and thermal fatigue. The authors formulate constitutive equations to describe the inelastic response for the given states of stress and microstructure. They introduce evolution equations to capture hardening, recovery, softening, ageing and damage processes. Principles of continuum mechanics and thermodynamics are presented to provide a framework for the modeling materials behavior with the aim of structural analysis of high-temperature engineering components.
Download or read book Materials for High Temperature Engineering Applications written by G.W. Meetham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise survey describes the requirements on materials operating in high-temperature environments and the processes that increase the temperature capability of metals, ceramics, and composites. The major part deals with the applicable materials and their specific properties, with one entire chapter devoted to coatings. Written for engineering and science students, researchers, and managers in industry.
Download or read book High temperature Structural Materials written by Robert W. Cahn and published by . This book was released on 1995 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book An Instrument for Measuring the Thermal Conductance of High temperature Structural Materials written by J. K. Sparrell and published by . This book was released on 1963 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thermal conductivity apparatus employing the absolute guarded hot plate principle was designed developed and fabricated for the United States Air Force. The primary objective of this instrument is to test honeycomb structures at elevated temperatures. A secondary objective is to test super-alloys, ceramics, and cermets. In general these operational requirements were met with calibration runs on copper to 1800 F and Al2O3 to 3000 F falling within the prescribed accuracy limits. Further thermal conductivity tests have been completed on Rene' 41 Honeycomb, Titanium Alloy Honeycomb, L605 Cobalt Alloy Honeycomb, Stainless Stainless Steel, Rene' 41, and Fused Silica. Thermal conductance tests on Tungsten and Columbium are planned. A detailed discussion is made of instrumentation and materials compatability problems encountered during the testing program.
Download or read book Ultra High Temperature Ceramics written by William G. Fahrenholtz and published by John Wiley & Sons. This book was released on 2014-10-10 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book to focus on ultra-high temperature ceramic materials in more than 20 years Ultra-High Temperature Ceramics are a family of compounds that display an unusual combination of properties, including extremely high melting temperatures (>3000°C), high hardness, and good chemical stability and strength at high temperatures. Typical UHTC materials are the carbides, nitrides, and borides of transition metals, but the Group IV compounds (Ti, Zr, Hf) plus TaC are generally considered to be the main focus of research due to the superior melting temperatures and stable high-melting temperature oxide that forms in situ. Rather than focusing on the latest scientific results, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications broadly and critically combines the historical aspects and the state-of-the-art on the processing, densification, properties, and performance of boride and carbide ceramics. In reviewing the historic studies and recent progress in the field, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications provides: Original reviews of research conducted in the 1960s and 70s Content on electronic structure, synthesis, powder processing, densification, property measurement, and characterization of boride and carbide ceramics. Emphasis on materials for hypersonic aerospace applications such as wing leading edges and propulsion components for vehicles traveling faster than Mach 5 Information on materials used in the extreme environments associated with high speed cutting tools and nuclear power generation Contributions are based on presentations by leading research groups at the conference "Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications II" held May 13-19, 2012 in Hernstein, Austria. Bringing together disparate researchers from academia, government, and industry in a singular forum, the meeting cultivated didactic discussions and efforts between bench researchers, designers and engineers in assaying results in a broader context and moving the technology forward toward near- and long-term use. This book is useful for furnace manufacturers, aerospace manufacturers that may be pursuing hypersonic technology, researchers studying any aspect of boride and carbide ceramics, and practitioners of high-temperature structural ceramics.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA. * All major aerospace structural materials covered: metals and composites * Focus on details of manufacture and use * Author has huge experience in aerospace industry * A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry
Download or read book Structural Materials written by C. J. McMahon and published by . This book was released on 2004 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates Written by an expert in that particular area
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors’ unique personal insight from decades of frontline research, engineering and management. Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.
Download or read book Future Landscape of Structural Materials in India written by Debashish Bhattacharjee and published by Springer Nature. This book was released on 2022-07-30 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a perspective on the research, development, and manufacturing aspects of structural materials in India. The contents highlight materials to strengthen technology advancements in sectors like aerospace, defense, automotive, energy, health, and ICT. With the momentum of the ‘Make in India’ initiative, India has seen an increase in manufacturing of advanced components for these sectors. The vast field of materials covers a whole gamut including structural materials such as metals like steel, aluminum, titanium, polymers, glass, cement and composites; functional materials such photovoltaics, and smart materials are also discussed. This anthology focuses on structural materials and studies, in particular, the Indian landscape of manufacturing capability, R&D capability and status of advanced structural materials compared to the rest of the world. This study highlights the gaps and suggests necessary actions in the national landscape of structural materials, given the pull that will come from the burgeoning advanced components manufacturing over the next 10-15 years. The scope of this study is limited to structural materials covering metals and alloys, structural polymers, cement, glass, composites and high temperature ceramics. The contents of this book will be useful to researchers, industry professionals, and policy makers alike.
Download or read book Advanced Structural Materials written by Winston O Soboyejo and published by CRC Press. This book was released on 2019-08-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A snapshot of the central ideas used to control fracture properties of engineered structural metallic materials, Advanced Structural Materials: Properties, Design Optimization, and Applications illustrates the critical role that advanced structural metallic materials play in aerospace, biomedical, automotive, sporting goods, and other industries in the twenty-first century. The book presents an overview of the structure, properties, and applications of these materials, including the basic ideas behind their design. It contains examples and accessible language, elucidating the basic concepts that guide the development of new alloys and composite materials. With in-depth reviews from leading contributors, the text develops an understanding of the breadth and depth of advances in the field. It begins with a broad introduction to advanced structural materials, then examines materials at the frontiers of emerging applications such as biomaterials, MEMS, amorphous materials, and nanotechnology. The chapter authors are experts in their own right and they assume no prior knowledge of a given material system, delineating the fundamental concepts and applications of advanced structural materials. The rich array of carefully selected topics provides useful insights into the structure, properties, and applications of advanced structural materials.
