Download or read book HIGH LEVEL WASTE HLW VITRIFICATION EXPERIENCE IN THE US written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Vitrification is currently the most widely used technology for the treatment of high level radioactive wastes (HLW) throughout the world. At the Savannah River Site (SRS) actual HLW tank waste has successfully been processed to stringent product and process constraints without any rework into a stable borosilicate glass waste since 1996. A unique 'feed forward' statistical process control (SPC) has been used rather than statistical quality control (SQC). In SPC, the feed composition to the melter is controlled prior to vitrification. In SQC, the glass product is sampled after it is vitrified. Individual glass property models form the basis for the 'feed forward' SPC. The property models transform constraints on the melt and glass properties into constraints on the feed composition. The property models are mechanistic and depend on glass bonding/structure, thermodynamics, quasicrystalline melt species, and/or electron transfers. The mechanistic models have been validated over composition regions well outside of the regions for which they were developed because they are mechanistic. Mechanistic models allow accurate extension to radioactive and hazardous waste melts well outside the composition boundaries for which they were developed.
Download or read book Operating Experience During High level Waste Vitrification at the West Valley Demonstration Project written by and published by . This book was released on 1999 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides a summary of operational experiences, component and system performance, and lessons learned associated with the operation of the Vitrification Facility (VF) at the West Valley Demonstration Project (WVDP). The VF was designed to convert stored high-level radioactive waste (HLW) into a stable waste form (borosilicate glass) suitable for disposal in a federal repository. Following successful completion on nonradioactive test, HLW processing began in July 1995. Completion of Phase 1 of HLW processing was reached on 10 June 1998 and represented the processing of 9.32 million curies of cesium-137 (Cs-137) and strontium-90 (Sr-90) to fill 211 canisters with over 436,000 kilograms of glass. With approximately 85% of the total estimated curie content removed from underground waste storage tanks during Phase 1, subsequent operations will focus on removal of tank heel wastes.
Download or read book Radioactive Waste Forms for the Future written by Werner Lutze and published by North Holland. This book was released on 1988 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a compilation of important information on the full range of radioactive waste forms that have been developed, or at least suggested, for the incorporation of high-level nuclear waste. Many of the results were published in the ''gray literature'' of final reports of national laboratories or in various, generally less available, proceedings volumes. This is the first publication to draw information on nuclear waste forms for high-level wastes together into a single volume. Although borosilicate glass has become the standard waste form, additional research in this compound is still necessary. With improved technology (particularly processing technologies) and with a more detailed knowledge of repository conditions, glasses and second generation waste forms with improved performance properties can be developed. Sustained research programs on nuclear waste form development will yield results that can only add to public confidence and the final, safe disposal of nuclear waste. The aim of this volume is to provide a 'spring board' for these future research efforts. A detailed presentation is given on the properties and performance of non-crystalline waste forms (borosilicate glass, sintered glass, and lead-iron phosphate glass), and crystalline waste forms (Synroc, tailored ceramics, TiO 2 - ceramic matrix, glass-ceramics and FUETAP concrete). A chapter on Novel Waste Forms reviews a number of methods that warrant further development because of their potential superior performance and unique applications. The final chapter includes a tabulated comparison of important waste form properties and an extended discussion on the corrosion process and radiation damage effects for each waste form. Of particular interest is a performance assessment of nuclear waste borosilicate glass and the crystalline ceramic Synroc. This is the first detailed attempt to compare these two important waste forms on the basis of their materials properties. The discussion emphasizes the difficulties in making such a comparison and details the types of data that are required. Each chapter has been written by an expert and includes a current compilation of waste form properties with an extensive list of references. This volume will provide a stimulus for future research as well as useful reference material for scientists working in the field of nuclear waste disposal and materials science.
Download or read book Design and Operation of High Level Waste Vitrification and Storage Facilities written by International Atomic Energy Agency and published by . This book was released on 1992 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report gives an up to date review of high level waste vitrification and storage facilities currently in an advanced stage of implementation.
Download or read book Nuclear Wastes written by National Research Council and published by National Academies Press. This book was released on 1996-02-23 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disposal of radioactive waste from nuclear weapons production and power generation has caused public outcry and political consternation. Nuclear Wastes presents a critical review of some waste management and disposal alternatives to the current national policy of direct disposal of light water reactor spent fuel. The book offers clearcut conclusions for what the nation should do today and what solutions should be explored for tomorrow. The committee examines the currently used "once-through" fuel cycle versus different alternatives of separations and transmutation technology systems, by which hazardous radionuclides are converted to nuclides that are either stable or radioactive with short half-lives. The volume provides detailed findings and conclusions about the status and feasibility of plutonium extraction and more advanced separations technologies, as well as three principal transmutation concepts for commercial reactor spent fuel. The book discusses nuclear proliferation; the U.S. nuclear regulatory structure; issues of health, safety and transportation; the proposed sale of electrical energy as a means of paying for the transmutation system; and other key issues.
Download or read book Strategy and Methodology for Radioactive Waste Characterization written by International Atomic Energy Agency and published by IAEA. This book was released on 2007 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade significant progress has been achieved in the development of waste characterization and control procedures and equipment as a direct response to ever-increasing requirements for quality and reliability of information on waste characteristics. Failure in control procedures at any step can have important, adverse consequences and may result in producing waste packages which are not compliant with the waste acceptance criteria for disposal, thereby adversely impacting the repository. The information and guidance included in this publication corresponds to recent achievements and reflects the optimum approaches, thereby reducing the potential for error and enhancing the quality of the end product. -- Publisher's description.
Download or read book Tank Waste Retrieval Processing and On site Disposal at Three Department of Energy Sites written by National Research Council and published by National Academies Press. This book was released on 2006-09-12 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: DOE Tank Waste: How clean is clean enough? The U.S. Congress asked the National Academies to evaluate the Department of Energy's (DOE's) plans for cleaning up defense-related radioactive wastes stored in underground tanks at three sites: the Hanford Site in Washington State, the Savannah River Site in South Carolina, and the Idaho National Laboratory. DOE plans to remove the waste from the tanks, separate out high-level radioactive waste to be shipped to an off-site geological repository, and dispose of the remaining lower-activity waste onsite. The report concludes that DOE's overall plan is workable, but some important challenges must be overcomeâ€"including the removal of residual waste from some tanks, especially at Hanford and Savannah River. The report recommends that DOE pursue a more risk-informed, consistent, participatory, and transparent for making decisions about how much waste to retrieve from tanks and how much to dispose of onsite. The report offers several other detailed recommendations to improve the technical soundness of DOE's tank cleanup plans.
Download or read book An Introduction to Nuclear Waste Immobilisation written by Michael I. Ojovan and published by Elsevier. This book was released on 2010-07-07 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and environmental impact is of uppermost concern when dealing with the movement and storage of nuclear waste. The 20 chapters in 'An Introduction to Nuclear Waste Immobilisation' cover all important aspects of immobilisation, from nuclear decay, to regulations, to new technologies and methods. Significant focus is given to the analysis of the various matrices used in transport: cement, bitumen and glass, with the greatest attention being given to glass. The last chapter concentrates on the performance assessment of each matrix, and on new developments of ceramics and glass composite materials, thermochemical methods and in-situ metal matrix immobilisation. The book thoroughly covers all issues surrounding nuclear waste: from where to locate nuclear waste in the environment, through nuclear waste generation and sources, treatment schemes and technologies, immobilisation technologies and waste forms, disposal and long term behaviour. Particular attention is paid to internationally approved and worldwide-applied approaches and technologies. * Each chapter focuses on a different matrix used in nuclear waste immobilisation: Cement, bitumen, glass and new materials. * Keeps the most important issues surrounding nuclear waste – such as treatment schemes and technologies, and disposal - at the forefront.
Download or read book Cementitious Materials for Nuclear Waste Immobilization written by Rehab O. Abdel Rahman and published by John Wiley & Sons. This book was released on 2014-11-17 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cementitious materials are an essential part in any radioactive waste disposal facility. Conditioning processes such as cementation are used to convert waste into a stable solid form that is insoluble and will prevent dispersion to the surrounding environment. It is incredibly important to understand the long-term behavior of these materials. This book summarises approaches and current practices in use of cementitious materials for nuclear waste immobilisation. It gives a unique description of the most important aspects of cements as nuclear waste forms: starting with a description of wastes, analyzing the cementitious systems used for immobilization and describing the technologies used, and ending with analysis of cementitious waste forms and their long term behavior in an envisaged disposal environment. Extensive research has been devoted to study the feasibility of using cement or cement based materials in immobilizing and solidifying different radioactive wastes. However, these research results are scattered. This work provides the reader with both the science and technology of the immobilization process, and the cementitious materials used to immobilize nuclear waste. It summarizes current knowledge in the field, and highlights important areas that need more investigation. The chapters include: Introduction, Portland cement, Alternative cements, Cement characterization and testing, Radioactive waste cementation, Waste cementation technology, Cementitious wasteform durability and performance assessment.
Download or read book Waste Immobilization in Glass and Ceramic Based Hosts written by Ian W. Donald and published by John Wiley & Sons. This book was released on 2010-04-01 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe storage in glass-based materials of both radioactiveand non-radioactive hazardous wastes is covered in a single book,making it unique Provides a comprehensive and timely reference source at thiscritical time in waste management, including an extensive andup-to-date bibliography in all areas outlined to waste conversionand related technologies, both radioactive and non-radioactive Brings together all aspects of waste vitrification, drawscomparisons between the different types of wastes and treatments,and outlines where lessons learnt in the radioactive waste fieldcan be of benefit in the treatment of non-radioactive wastes
Download or read book An Introduction to Nuclear Waste Immobilisation written by Michael I Ojovan and published by Elsevier. This book was released on 2013-12-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on the authors' extensive experience in the processing and disposal of waste, An Introduction to Nuclear Waste Immobilisation, Second Edition examines the gamut of nuclear waste issues from the natural level of radionuclides in the environment to geological disposal of waste-forms and their long-term behavior. It covers all-important aspects of processing and immobilization, including nuclear decay, regulations, new technologies and methods. Significant focus is given to the analysis of the various matrices used, especially cement and glass, with further discussion of other matrices such as bitumen. The final chapter concentrates on the performance assessment of immobilizing materials and safety of disposal, providing a full range of the resources needed to understand and correctly immobilize nuclear waste.
Download or read book Properties of Glass Forming Melts written by David Pye and published by CRC Press. This book was released on 2005-05-12 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art information concerning properties and processes involved in glass melts. Based upon contributions by renowned authors and scientists working with glass melt systems, Properties of Glass-Forming Melts is an excellent compilation of the current knowledge on property data, mechanisms, measurement techniques, and str
Download or read book RECENT PROCESS IMPROVEMENTS TO INCREASE HLW THROUGHPUT AT THE DWPF written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF), the world's largest operating high level waste (HLW) vitrification plant, began stabilizing about 35 million gallons of SRS liquid radioactive waste by-product in 1996. The DWPF has since filled over 2000 canisters with about 4000 pounds of radioactive glass in each canister. In the past few years there have been several process and equipment improvements at the DWPF to increase the rate at which the waste can be stabilized. These improvements have either directly increased waste processing rates or have desensitized the process and therefore minimized process upsets and thus downtime. These improvements, which include glass former optimization, increased waste loading of the glass, the melter heated bellows liner, and glass surge protection software, will be discussed in this paper.
Download or read book Radioactive Waste Management written by and published by . This book was released on 1981 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Form Qualification Experience at the West Valley Demonstration Project written by R. A. Palmer and published by . This book was released on 2003 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1996, the West Valley Demonstration Project (WVDP) has operated a slurry-fed ceramic melter to vitrify high-level nuclear waste (HLW) for the U.S. Department of Energy (DOE). More than 65 batches of HLW were mixed with glass-forming chemicals between June 1996 and August 2002 to make a ''qualified'' HLW form. The nuances of this procedure and the lessons learned from the application of the process will be provided in this paper to guide future producers of immobilized HLW.
Download or read book Advanced High Level Waste Glass Research and Development Plan written by and published by . This book was released on 2015 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy Office of River Protection (ORP) has implemented an integrated program to increase the loading of Hanford tank wastes in glass while meeting melter lifetime expectancies and process, regulatory, and product quality requirements. The integrated ORP program is focused on providing a technical, science-based foundation from which key decisions can be made regarding the successful operation of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) facilities. The fundamental data stemming from this program will support development of advanced glass formulations, key process control models, and tactical processing strategies to ensure safe and successful operations for both the low-activity waste (LAW) and high-level waste (HLW) vitrification facilities with an appreciation toward reducing overall mission life. The purpose of this advanced HLW glass research and development plan is to identify the near-, mid-, and longer-term research and development activities required to develop and validate advanced HLW glasses and their associated models to support facility operations at WTP, including both direct feed and full pretreatment flowsheets. This plan also integrates technical support of facility operations and waste qualification activities to show the interdependence of these activities with the advanced waste glass (AWG) program to support the full WTP mission. Figure ES-1 shows these key ORP programmatic activities and their interfaces with both WTP facility operations and qualification needs. The plan is a living document that will be updated to reflect key advancements and mission strategy changes. The research outlined here is motivated by the potential for substantial economic benefits (e.g., significant increases in waste throughput and reductions in glass volumes) that will be realized when advancements in glass formulation continue and models supporting facility operations are implemented. Developing and applying advanced glass formulations will reduce the cost of Hanford tank waste management by reducing the schedule for tank waste treatment and reducing the amount of HLW glass for storage, transportation, and disposal. Additional benefits will be realized if advanced glasses are developed that demonstrate more tolerance for key components in the waste (such as Al2O3, Cr2O3, SO3 and Na2O) above the currently defined WTP constraints. Tolerating these higher concentrations of key waste loading limiters may reduce the burden on (or even eliminate the need for) leaching to remove Cr and Al and washing to remove excess S and Na from the HLW fraction. Advanced glass formulations may also make direct vitrification of the HLW fraction without significant pretreatment more cost effective. Finally, the advanced glass formulation efforts seek not only to increase waste loading in glass, but also to increase glass production rate. When coupled with higher waste loading, ensuring that all of the advanced glass formulations are processable at or above the current contract processing rate leads to significant improvements in waste throughput (the amount of waste being processed per unit time), which could significantly reduce the overall WTP mission life. The integration of increased waste loading, reduced leaching/washing requirements, and improved melting rates provides a system-wide approach to improve the effectiveness of the WTP process.
