Download or read book Heat and Fluid Flow in Nuclear and Process Plant Safety written by Institution of Mechanical Engineers (Great Britain). Engineering Sciences Division and published by . This book was released on 1983 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat and Fluid Flow in Nuclear and Process Plant Safety written by and published by . This book was released on 1983 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process and Plant Safety written by Jürgen Schmidt and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe operation of plants is of paramount importance in the chemical, petrochemical and pharmaceutical industries. Best practice in process and plant safety allows both the prevention of hazards and the mitigation of consequences. Safety Technology is continuously advancing to new levels and Computational Fluid Dynamics (CFD) is already successfully established as a tool to ensure the safe operation of industrial plants. With CFD tools, a great amount of knowledge can be gained as both the necessary safety measures and the economic operation of plants can be simultaneously determined. Young academics, safety experts and safety managers in all parts of the industry will henceforth be forced to responsibly judge these new results from a safety perspective. This is the main challenge for the future of safety technology. This book serves as a guide to elaborating and determining the principles, assumptions, strengths, limitations and application areas of utilizing CFD in process and plant safety, and safety management. The book offers recommendations relating to guidelines, procedures, frameworks and technology for creating a higher level of safety for chemical and petrochemical plants. It includes modeling aids and concrete examples of industrial safety measures for hazard prevention.
Download or read book Heat Transfer and Fluid Flow in Nuclear Systems written by Henri Fenech and published by Elsevier. This book was released on 2013-10-22 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer and Fluid in Flow Nuclear Systems discusses topics that bridge the gap between the fundamental principles and the designed practices. The book is comprised of six chapters that cover analysis of the predicting thermal-hydraulics performance of large nuclear reactors and associated heat-exchangers or steam generators of various nuclear systems. Chapter 1 tackles the general considerations on thermal design and performance requirements of nuclear reactor cores. The second chapter deals with pressurized subcooled light water systems, and the third chapter covers boiling water reactor systems. Chapter 4 tackles liquid metal cooled systems, while Chapter 5 discusses helium cooled systems. The last chapter deals with heat-exchangers and steam generators. The book will be of great help to engineers, scientists, and graduate students concerned with thermal and hydraulic problems.
Download or read book Heat and Fluid Flow in Water Reactor Safety written by Institution of Mechanical Engineers (Great Britain). Thermodynamics and Fluid Mechanics Group and published by . This book was released on 1977 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Analysis of Nuclear Reactor Thermal Hydraulics written by Liangming Pan and published by Frontiers Media SA. This book was released on 2021-06-09 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design basis Accident Analysis Methods For Light water Nuclear Power Plants written by Robert Martin and published by World Scientific. This book was released on 2019-02-13 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the principles of safety evaluation as practiced in the regulated light-water reactor nuclear industry, as established and stabilized over the last 30 years. It is expected to serve both the current industry and those planning for the future. The work's coverage of the subject matter is the broadest to date, including not only the common topics of modeling and simulation, but also methods supporting the basis for the underlying assumptions, the extension to radiological safety, what to expect in a licensing review, historical perspectives and the implication for new designs.This text is an essential resource for practitioners and students, on the current best-practices in nuclear power plant safety and their basis. Contributors of this work are subject matter experts in their specialties, much of which was nurtured and inspired by Prof. Larry Hochreiter, a prominent nuclear safety pioneer.Related Link(s)
Download or read book Nuclear Reactor Thermal Hydraulics written by Robert E. Masterson and published by CRC Press. This book was released on 2019-08-21 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Thermal-Hydraulic Systems provides a comprehensive approach to nuclear reactor thermal-hydraulics, reflecting the latest technologies, reactor designs, and safety considerations. The text makes extensive use of color images, internet links, computer graphics, and other innovative techniques to explore nuclear power plant design and operation. Key fluid mechanics, heat transfer, and nuclear engineering concepts are carefully explained, and supported with worked examples, tables, and graphics. Intended for use in one or two semester courses, the text is suitable for both undergraduate and graduate students. A complete Solutions Manual is available for professors adopting the text.
Download or read book Nuclear Thermal Hydraulic and Two Phase Flow written by Jun Wang and published by Frontiers Media SA. This book was released on 2018-10-11 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear energy is one of the most important clear energy and contributes more than 10% electric power to human society in the past decades of years. The nuclear thermal hydraulic and two-phase flow is one of the basic branches of nuclear technology and provides structure design and safety analysis to the nuclear power reactors. In the new century, the basic theoretical research of thermal hydraulic and two-phase flow, and innovative design for the next generation nuclear power plants (especially for the small modular reactor and molten salt reactor), along with other nuclear branches, constantly support the development of nuclear technology.
Download or read book Heat Transfer Fluid Flow Digest written by and published by . This book was released on 1983 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Nuclear Reactor Safety written by S. George Bankoff and published by McGraw-Hill Companies. This book was released on 1982 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Systems Volume II written by Neil E. Todreas and published by CRC Press. This book was released on 2021-12-13 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses fundamental ideas for various modeling approaches for the macro- and micro-scale flow conditions in the reactor. Covers specific design considerations, such as natural convection and core reliability. Enables the reader to better understand the importance of safety considerations in thermal engineering and analysis of a modern nuclear plant. Features end-of-chapter problems. Includes a Solutions Manual for adopting instructors.
Download or read book Heat and Fluid Flow in Water Reactor Safety written by and published by . This book was released on 1977 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk and Safety Analysis of Nuclear Systems written by John C. Lee and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been developed in conjunction with NERS 462, a course offered every year to seniors and graduate students in the University of Michigan NERS program. The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used to analyze the unavailability of systems with repairs, fault trees and event trees used in probabilistic risk assessments (PRAs), and failure modes of systems. All of this material is general enough that it could be used in non-nuclear applications, although there is an emphasis placed on the analysis of nuclear systems. The second half of the book covers the safety analysis of nuclear energy systems, an analysis of major accidents and incidents that occurred in commercial nuclear plants, applications of PRA techniques to the safety analysis of nuclear power plants (focusing on a major PRA study for five nuclear power plants), practical PRA examples, and emerging techniques in the structure of dynamic event trees and fault trees that can provide a more realistic representation of complex sequences of events. The book concludes with a discussion on passive safety features of advanced nuclear energy systems under development and approaches taken for risk-informed regulations for nuclear plants.
Download or read book Thermal and Reliability Criteria for Nuclear Fuel Safety written by Maksym Maksymov and published by CRC Press. This book was released on 2022-09-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers basic approaches to the nuclear fuel state of energy reactors in the last stages of the nuclear fuel cycle, these have been developed by the authors based on Ukrainian Nuclear Power Plant (NPP) operational experience. The book starts by looking at the physical safety basis of water-water energetic reactor (WWER) nuclear fuel. It goes on to discuss modern approaches to the heat exchange modelling in nuclear power plant equipment. Next, the safety criteria when making a decision about dry storage for WWER-1000 fuel assembly are discussed. Then the effect of reactor capacity cyclic changes on energy accumulation of creep formations in fuel cladding is covered in full, along with a chapter on the analysis of WWER-1000 fuel cladding failure. Finally, the book finishes with a description of thermal safety criteria for dry storage of spent nuclear fuel. The book is essential reading for anyone concerned with NPP maintenance and safety.
Download or read book Nuclear Safety written by and published by . This book was released on 1962 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Hydraulic Analysis of Nuclear Reactors written by Bahman Zohuri and published by Springer. This book was released on 2017-05-23 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised text covers the fundamentals of thermodynamics required to understand electrical power generation systems and the application of these principles to nuclear reactor power plant systems. The book begins with fundamental definitions of units and dimensions, thermodynamic variables and the Laws of Thermodynamics progressing to sections on specific applications of the Brayton and Rankine cycles for power generation and projected reactor systems design issues. It is not a traditional general thermodynamics text, per se, but a practical thermodynamics volume intended to explain the fundamentals and apply them to the challenges facing actual nuclear power plants systems, where thermal hydraulics comes to play. There have been significant new findings for intercooled systems since the previous edition published and they will be included in this volume. New technology plans for using a Nuclear Air-Brayton as a storage system for a low carbon grid are presented along with updated component sizes and performance criteria for Small Modular Reactors. Written in a lucid, straight-forward style while retaining scientific rigor, the content is accessible to upper division undergraduate students and aimed at practicing engineers in nuclear power facilities and engineering scientists and technicians in industry, academic research groups, and national laboratories. The book is also a valuable resource for students and faculty in various engineering programs concerned with nuclear reactors.