Download or read book Handbook of Valves and Actuators written by Brian Nesbitt and published by Elsevier. This book was released on 2011-04-19 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key reference provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information they need for the job in hand. Brian Nesbitt is a well-known consultant with a considerable publishing record. A lifetime of experience backs up the huge amount of practical detail in this volume. * Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance require* Practical approach backed up with technical detail and engineering know-how makes this the ideal single volume reference* Compares and contracts valve and actuator types to ensure the right equipment is chosen for the right application and properly maintained
Download or read book Handbook of Valves and Actuators written by Archana Sikarwar and published by . This book was released on 2015-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance required. Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information. In the presentations in their chapters, authors have written bases on their own experience as well as those of their associates. Most chapters overlap several others. If differences of opinion or technique become apparent, seeming contradictions, it is because each author has had success with his or her particular technique, not that others are wrong. It should be recognised that each author's experience may not be directed to a particular industry, perhaps omitting ideas important to other industries. An effort has been made to cross-reference chapters so that the reader may be aware of other points of view.
Download or read book Valve Handbook 3rd Edition written by Philip L. Skousen and published by McGraw Hill Professional. This book was released on 2011-04-22 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, up-to-date coverage of valves for the process industry Revised to include details on the latest technologies, Valve Handbook, Third Edition, discusses design, performance, selection, operation, and application. This updated resource features a new chapter on the green technology currently employed by the valve industry, as well as an overview of the major environmental global standards that process plants are expected to meet. The book also contains new information on: Valves used in the wastewater industry Applying emergency shutdown (ESO) valves Recent changes to shutoff classifications Valves specified for the nuclear industry The procurement process for the Nuclear Stamp (N-Stamp) The emergence of wireless technology and its application to current smart technology Characteristics of high-performance hydraulic fluid Valve Handbook, Third Edition, covers: Valve selection criteria Manual valves Check valves Pressure relief valves Control valves Manual operators and actuators Smart valves and positioners Valve and actuator sizing Green valve technology and application Common valve problems Valve purchasing issues
Download or read book Valve Handbook written by Philip L. Skousen and published by McGraw-Hill Professional Publishing. This book was released on 1998 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up to date and comprehensive reference on all aspects of valve design, operation and maintenance. It includes information on smart valves and fugitive emissions control, critical issues for the next decade.
Download or read book Valve Selection Handbook written by Peter Smith and published by Elsevier. This book was released on 2004-01-24 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valves are the components in a fluid flow or pressure system that regulate either the flow or the pressure of the fluid. They are used extensively in the process industries, especially petrochemical. Though there are only four basic types of valves, there is an enormous number of different kinds of valves within each category, each one used for a specific purpose. No other book on the market analyzes the use, construction, and selection of valves in such a comprehensive manner. Covers new environmentally-conscious equipment and practices, the most important hot-button issue in the petrochemical industry today Details new generations of valves for offshore projects, the oil industry's fastest-growing segment Includes numerous new products that have never before been written about in the mainstream literature
Download or read book Valve Handbook written by Philip Skousen and published by McGraw Hill Professional. This book was released on 2004-06-22 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The valve industry has become increasingly digitized over the past five years. This revised second edition reflects those developments by focusing on the latest processing plant applications for "smart valve" technology. * Updated information on testing agencies and the latest code changes Contents: Introduction to Valves * Valve Selection Criteria * Manual Valves * Control Valves * Manual Operators and Actuators * New Smart Valve Technology * Smart Valve and Positioners * Valve Sizing * Actuator Sizing * Common Valve Problems * Abbreviations of Related Organizations and Standards
Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today’s subsea technology. Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies Learn and review the applicable standards and specifications from API and ISO in one convenient location Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Download or read book Pneumatic Handbook written by A. Barber and published by Elsevier. This book was released on 1997-12-19 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accepted as the standard reference work on modern pneumatic and compressed air engineering, the new edition of this handbook has been completely revised, extended and updated to provide essential up-to-date reference material for engineers, designers, consultants and users of fluid systems.
Download or read book A Practical Guide to Piping and Valves for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-01-12 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today’s valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project
Download or read book Valves Piping and Pipelines Handbook written by T. Christopher Dickenson and published by Elsevier. This book was released on 1999 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. Over recent years, a number of significant developments in the application of valves have taken place: the increasing use of actuator devices, the introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces. New metallic materials and coatings available make it possible to improve application ranges and reliability. New and improved polymers, plastic composite materials and ceramics are all playing their part. Fibre-reinforced plastic pipe systems, glass-reinforced epoxy pipe systems and the traditional low-cost polyester pipe systems have all undergone sophisticated design and manufacturing technology changes. The pote
Download or read book ISA Handbook of Control Valves written by James W. Hutchison and published by . This book was released on 1976 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Concise Valve Handbook Volume I written by Michael A. Crabtree and published by Momentum Press. This book was released on 2018-09-26 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book comprises a comprehensive up-to-date body of knowledge that provides a total in-depth insight into valve and actuator technology – looking not just at control valves, but a whole host of other types including: check valves, shut-off valves, solenoid valves, and pressure relief valves. Research studies within the process industry routinely indicate that the fluid control valve is responsible for 60 to 70% of poor-functioning control systems. Furthermore, valves in general are consistently wrongly selected, regularly misapplied, and often incorrectly installed. A methodology is presented to ensure the optimum selection of size, choice of body and trim materials, components, and ancillaries. Whilst studying the correct procedures for sizing, readers will also learn the correct procedures for calculating the spring ‘wind-up’ or ‘bench set’. Maintenance issues also include: testing for deadband/hysteresis, stick-slip and non-linearity; on-line diagnostics; and signature analysis. Written in a detailed but understandable language, the two volumes are presented in a form suitable for both the beginner, with no prior knowledge of the subject, and the more advanced specialist.
Download or read book Fluid Power Design Handbook written by Frank Yeaple and published by CRC Press. This book was released on 1995-10-24 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining and enhancing the high standards and excellent features that made the previous editions so popular, this book presents engineering and application information to incorporate, control, predict, and measure the performance of all fluid power components in hydraulic or pneumatic systems. Detailing developments in the ongoing "electronic re
Download or read book Valve and Actuator Technology written by Wayne Ulanski and published by McGraw-Hill Companies. This book was released on 1991 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Hydraulic Handbook written by Trevor M. Hunt and published by Elsevier. This book was released on 1996 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The first point of reference for design engineers, hydraulic technicians, chief engineers, plant engineers, and anyone concerned with the selection, installation, operation or maintenance of hydraulics equipment. The hydraulic industry has seen many changes over recent years and numerous new techniques, components and methods have been introduced. The ninth edition of the Hydraulic Handbook incorporates all these developments to provide a crucial reference manual for practical and technical guidance.
Download or read book The Valve and Actuator User s Manual written by Eur. Ing. R C Whitehouse and published by Wiley. This book was released on 1993-03-02 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published on behalf of the BVAMA. This practical new edition contains the latest developments in valve technology which have occurred over over the last ten years. In addition, it includes a much larger section on actuators than the earlier works, underlining the importance of actuators in the valve industry today. It also outlines the work being undertaken by various BVAMA committees to achieve a common standard for valves and actuators throughout Europe COMPLETE CONTENTS: The history of valves Valve terminology Basic valve design Standards for valves Valve selection techniques: Linear valves Rotary valves Check valves Safety and relief valves Pressure control valves Miscellaneous valves Recent developments Actuators Valve operating forces Pneumatic actuators Electric actuators Hydraulic actuators Actuators for control valves Installation of valves and actuators Maintenance of valves and actuators
Download or read book Valve Selection Handbook written by R. W. Zappe and published by Gulf Professional Publishing. This book was released on 1999 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive guide to valve selection is the result of the author's lifelong study of the design and application of valves. It covers the fundamentals of sealing mechanisms, as well as the sealability of fluids and flow through valves. You will find a complete analysis of valve designs for various industrial flow applications. This fourth edition is thoroughly updated, with revised and expanded chapters on pressure relief valves and rupture discs. This book takes into account U.S. practices and codes as well as emerging European standards. The book is an excellent reference text for practicing engineers and students. It is also of interest to valve manufacturers and authorities who evaluate and establish standards.
