Download or read book Grain Boundary Chromium Concentration Effects on the IGSCC and IASCC of Austenitic Stainless Steels written by Stephen M. Bruemmer and published by . This book was released on 1993 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Hardening and Radiation induced Chromium Depletion Effects on Intergranular Stress Corrosion Cracking of Austenitic Stainless Steels written by and published by . This book was released on 1993 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available data on neutron-irradiated materials have been analyzed and correlations developed between fluence, yield strength, grain boundary chromium concentration and cracking susceptibility in high-temperature water environments. Large heat-to-heat differences in critical fluence (0.2 to 2.5 n/cm[sup 2]) for IGSCC are documented. In many cases, this variability is consistent with yield strength differences among irradiated materials. IGSCC correlated better to yield strength than to fluence for most heats suggesting a possible role of the radiation-induced hardening (and microstructure) on cracking. However, isolatedheats reveal a wide range of yield strengths from 450 to 800 MPa necessary to promote IGSCC which cannot be understood by strength effects alone. Grain boundary Cr depletion explain differences in IGSCC susceptibility for irradiated stainless steels. Cr contents versus SCC shows that all materials showing IG cracking have some grain boundary depletion ([ge]2%). Grain boundary Cr concentrations for cracking (below [approximately]16 wt %) are in good agreement with similar SCC tests on unirradiated 304 SS with controlled depletion profiles. Heats that prompt variability in the yield strength correlation, are accounted for bydifferences in their interfacial Cr contents. Certain stainless steels are more resistant to cracking even though they have significant radiation-induced Cr depletion. It is proposed that Cr depletion is required for IASCC, but observed susceptibility is modified by other microchemical and microstructural components.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by Arvind S. Kumar and published by ASTM International. This book was released on 1994 with total page 1319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress Corrosion Cracking written by V S Raja and published by Elsevier. This book was released on 2011-09-22 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of stress corrosion cracking (SCC), which causes sudden failure of metals and other materials subjected to stress in corrosive environment(s), has a significant impact on a number of sectors including the oil and gas industries and nuclear power production. Stress corrosion cracking reviews the fundamentals of the phenomenon as well as examining stress corrosion behaviour in specific materials and particular industries.The book is divided into four parts. Part one covers the mechanisms of SCC and hydrogen embrittlement, while the focus of part two is on methods of testing for SCC in metals. Chapters in part three each review the phenomenon with reference to a specific material, with a variety of metals, alloys and composites discussed, including steels, titanium alloys and polymer composites. In part four, the effect of SCC in various industries is examined, with chapters covering subjects such as aerospace engineering, nuclear reactors, utilities and pipelines.With its distinguished editors and international team of contributors, Stress corrosion cracking is an essential reference for engineers and designers working with metals, alloys and polymers, and will be an invaluable tool for any industries in which metallic components are exposed to tension, corrosive environments at ambient and high temperatures. - Examines the mechanisms of stress corrosion cracking (SCC) presenting recognising testing methods and materials resistant to SCC - Assesses the effect of SCC on particular metals featuring steel, stainless steel, nickel-based alloys, magnesium alloys, copper-based alloys and welds in steels - Reviews the monitoring and management of SCC and the affect of SCC in different industries such as petrochemical and aerospace
Download or read book Radiation Effects in Solids written by Kurt E. Sickafus and published by Springer Science & Business Media. This book was released on 2007-05-22 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive overview of fundamental principles and relevant technical issues associated with the behavior of solids exposed to high-energy radiation. These issues are important to the development of materials for existing fission reactors or future fusion and advanced reactors for energy production; to the development of electronic devices such as high-energy detectors; and to the development of novel materials for electronic and photonic applications.
Download or read book The Effect of Molybdenum on the Grain Boundary Segregation of Chromium Exhibited by Austenitic Stainless Steels After Neutron Irradiation in a BWR written by JC. Walmsley and published by . This book was released on 2000 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical investigations employing field-emission gun scanning transmission electron microscopy (FEGSTEM) have indicated that the degree of chromium depletion at grain boundaries is less pronounced in AISI type-316 when compared to type-304 stainless steel after neutron irradiation in Boiling Water Reactor (BWR) conditions to a fluence of 1026 n.m-2 (E > 1 MeV). An explanation of this observation is proposed, which is based on the non-equilibrium segregation (NES) theory of grain boundary segregation. NES model predictions for the radiation-induced segregation of chromium and molybdenum in an austenitic matrix are presented together for the first time. The predicted segregation profiles are compared with the FEGSTEM data, whilst the predicted trends as a function of neutron dose are discussed in terms of possible microstructural evolution in a BWR environment. In particular it will be demonstrated how, according to NES theory, the binding of molybdenum to self-interstitial atoms (SIAs) will take precedence over chromium. In turn, the subsequent migration of molybdenum-SIA "complexes" retard the migration of chromium away from the grain boundary, thus moderating the magnitude of radiation-induced chromium depletion.
Download or read book Environmentally Assisted Cracking written by R. D. Kane and published by ASTM International. This book was released on 2000 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The November 2000 symposium addressed methodologies for evaluation of environmental assisted cracking (EAC) in equipment and structures exposed to corrosive environments, and recent developments in the generation of relevant materials properties data based on laboratory tests. Twenty-seven papers fr
Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation.This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems.With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. - Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities - Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them - Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches
Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Radiation Materials Science written by Gary S. Was and published by Springer Science & Business Media. This book was released on 2007-07-16 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an eye-opening treatise on the fundamentals of the effects of radiation on metals and alloys. When energetic particles strike a solid, numerous processes occur that can change the physical and mechanical properties of the material. Metals and alloys represent an important class of materials that are subject to intense radiation fields. Radiation causes metals and alloys to swell, distort, blister, harden, soften and deform. This textbook and reference covers the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys.
Download or read book The Engineering Index Annual written by and published by . This book was released on 1994 with total page 2398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Materials and Water Chemistry for Supercritical Water cooled Reactors written by David Guzonas and published by Woodhead Publishing. This book was released on 2017-10-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Water Chemistry for Supercritical Water-cooled Reactors is unique in that it brings together materials and water chemistry, their interrelationship, the historical perspective and their application to SCWR conceptual design. Written by world's leading experts, all active in the area of materials and chemistry R&D in support of GEN IV SCWR, this book presents for the first time a comprehensive reference on these topics, and in particular, how these data relate to the SCWR design itself. This book is an essential text for researchers in the areas of supercritical water-cooled reactor materials and chemistry, working in industry or academia. It will also give newcomers to the field a survey of all of the available literature and a clear understanding of how these studies relate to the design of the SCWR concept. The material presented is at a specialist's level in materials or corrosion science, or in water chemistry of power plants. - Provides comprehensive coverage of the chemistry and materials of SCWR - Presents the latest research and results condensed into one book - Covers the differences in use of SCW in nuclear reactors and fossil plants, and the resulting differences in materials requirements
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Government Reports Annual Index written by and published by . This book was released on 1994 with total page 1372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. - Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials - Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates - Written by an expert in that particular area
