Download or read book Geotechnical Testing Observation and Documentation written by Tim Davis and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Author Tim Davis, construction inspector with the Construction Management and Inspection Department for Sacramento County, California, assembled this in-depth field manual for soil technicians and geotechnical engineers for use during the investigation, grading, and construction phases of geotechnical projects"--

Download or read book Geotechnical Site Characterization written by Anirban De and published by Momentum Press. This book was released on 2016-03-02 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of site characterization is unique to geotechnical engineering and owes its significance directly to the variability of the natural geologic deposits on the earth’s surface. Proper site characterization requires an understanding of various field and laboratory investigation methods. The book discusses the suitability of various methods under different site conditions and presents the procedures to derive design parameters based on interpretation of test results. Recent developments in specialized site characterization methods (such as seismic hazard evaluation) are also included. Three recent case histories are presented, where site characterization played a key role. The three disparate cases include soft natural soil under static loading, coarse and fine-grained soil under seismic impact, and hazardous waste deposits under both static and seismic loading. Site investigation requirements of building codes are discussed and guidelines for preparing a typical site characterization report are presented. The book is aimed at the practicing geotechnical engineer, as well as advanced undergraduate and graduate students.

Download or read book Geotechnical Testing Observation and Documentation written by Tim Davis and published by Amer Society of Civil Engineers. This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book of its kind, Geotechnical Testing, Observation, and Documentation is an in-depth field manual for soil technicians and field engineers. Designed to be used as a reference guide during the investigation, grading, and construction phases of a geotechnical project, this book provides solutions to actual geotechnical project situations. From an extensive section on how to classify soil in the field using the Unified Soil Classification System, to chapters on basic laboratory testing, exploration techniques, documentation, and sampling methods, readers are afforded a thorough understanding of the complete process involved during the geotechnical project. Geotechnical Testing, Observation, and Documentation shows how to understand common laboratory and field tests, classify soil accurately, interpret project recommendations, improve communication, and document the entire construction monitoring process. With photos, diagrams, standard details and test forms, step-by-step test procedures with tips, and a glossary of geotechnical related terms; this book is an invaluable training tool for technicians and engineers.

Download or read book Practical Engineering Geology written by Steve Hencher and published by CRC Press. This book was released on 2012-01-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steve Hencher presents a broad and fresh view on the importance of engineering geology to civil engineering projects. Practical Engineering Geology provides an introduction to the way that projects are managed, designed and constructed and the ways that the engineering geologist can contribute to cost-effective and safe project achievement. The nee

Download or read book Soft Clay Engineering and Ground Improvement written by Jay Ameratunga and published by CRC Press. This book was released on 2021-04-21 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft Clay Engineering and Ground Improvement covers the design and implementation of ground improvement techniques as applicable to soft clays. This particular subject poses major geotechnical challenges in civil engineering. Not only civil engineers, but planners, architects, consultants and contractors are now aware what soft soils are and the risks associated with development of such areas. The book is designed as a reference and useful tool for those in the industry, both to consultants and contractors. It also benefits researchers and academics working on ground improvement of soft soils, and serves as an excellent overview for postgraduates. University lecturers are beginning to incorporate more ground improvement topics into their curricula, and this text would be ideal for short courses for practicing engineers. It includes several examples to assist a newcomer to carry out preliminary designs. The three authors, each with dozens of years of experience, have witnessed and participated in the rapid evolvement of ground improvement in soft soils. In addition, top-tier professionals who deal with soft clays and ground improvement on a daily basis have contributed, providing their expertise in dealing with real-world problems and practical solutions.

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book Manual of Geotechnical Laboratory Soil Testing written by Bashir Ahmed Mir and published by CRC Press. This book was released on 2021-10-03 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual of Geotechnical Laboratory Soil Testing covers the physical, index, and engineering properties of soils, including compaction characteristics (optimum moisture content), permeability (coefficient of hydraulic conductivity), compressibility characteristics, and shear strength (cohesion intercept and angle of internal friction). Further, this manual covers data collection, analysis, computations, additional considerations, sources of error, precautionary measures, and the presentation results along with well-defined illustrations for each of the listed tests. Each test is based on relevant standards with pertinent references, broadly aimed at geotechnical design applications. FEATURES Provides fundamental coverage of elementary-level laboratory characterization of soils Describes objectives, basic concepts, general understanding, and appreciation of the geotechnical principles for determination of physical, index, and engineering properties of soil materials Presents the step-by-step procedures for various tests based on relevant standards Interprets soil analytical data and illustrates empirical relationship between various soil properties Includes observation data sheet and analysis, results and discussions, and applications of test results This manual is aimed at undergraduates, senior undergraduates, and researchers in geotechnical and civil engineering. Prof. (Dr.) Bashir Ahmed Mir is among the senior faculty of the Civil Engineering Department of the National Institute of Technology Srinagar and has more than two decades of teaching experience. Prof. Mir has published more than 100 research papers in international journals and conferences; chaired technical sessions in international conferences in India and throughout the world; and provided consultancy services to more than 150 projects of national importance to various government and private agencies.

Download or read book Handbook of Geotechnical Testing written by Yanrong Li and published by CRC Press. This book was released on 2019-12 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Determination of the physical, chemical and mechanical properties of ground materials is the key to successfully deliver such projects as slope stabilization, excavation and lateral support, foundation etc. A book containing both theory of geomaterial testing and up-to-date testing methods is much in demand for obtaining reliable and accurate test results. This book is intended primarily to serve this need and aims at the clear explanation, in adequate depth, of the fundamental principles, requirements and procedures of soil and rock tests. It is intended that the book will serve as a useful source of reference for professionals in the field of geotechnical and geological engineering. It can work as a one-stop knowledge warehouse to build a basic cognition of material tests on which the readers are working. It helps college students bridge the gap between class education and engineering practice, and helps academic researchers guarantee reliable and accurate test results. It is also useful for training new technicians and providing a refresher for veterans. Engineers contemplating the ICE, IOM3 and other certification exams will find this book an essential test preparation aid. It is assumed that the reader has no prior knowledge of the subject but has a good understanding of basic mechanics.

Download or read book Seven Wonders of Engineering written by Ron Miller and published by Twenty-First Century Books. This book was released on 2010-01-01 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: In every age, science and technology have played an important role in advancing human civilization. From architecture to engineering, communication to transportation, humans have invented and developed extraordinary wonders. Engineers take the discoveries of scientists and mathematicians to make practical things, from roads and bridges to weapons and vehicles. Electronic engineers design and build everything from television sets to computers. Chemical engineers research new uses for plastics and other materials. Other engineers design new energy sources and nonpolluting factories. In this book, we’ll explore seven wonders of modern engineering that allow people to travel beneath the ocean, bring power to entire cities, and land on the moon. We’ll also see engineering wonders that cut though a continent and design engines too small to see. Along the way, we’ll see advancements in materials, technology, and construction techniques, and we’ll learn the stories of how and why these engineering feats became important to the world.

Download or read book Soils Earthwork and Foundations written by Dean Read and published by . This book was released on 2015-10-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Tunnel Construction written by Gary B. Hemphill and published by John Wiley & Sons. This book was released on 2012-10-05 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only modern guide to all aspects of practical tunnel construction Practical Tunnel Construction fills a void in the literature for a practical guide to tunnel construction. By taking the reader through a brief introduction and history to a comprehensive discussion of how the geological factors affect tunneling, the author covers the stages and technology that are common today without using complex equations. Written for the individual who does not have an extensive background in tunneling but who has to make tunneling decisions, the various tunneling methods are discussed to help in the determination of the appropriate method. The methods discussed are: hand mining, drill/blast, Tunnel Boring Machine (TBM), New Austrian Tunnelling Method (NATM), Norwegian Method of Tunnelling (NMT), Roadheader, Earth Pressure Balance Machine (EPBM), and Slurry Pressure Balance Machine (SPBM). This book focuses on driven tunnels. This versatile handbook: Offers clear and accessible coverage of the state of the art in tunnel construction Introduces the essentials of design and construction of many types of tunnels, including TBM, EPB, Roadheader, NATM, drill and blast, and soft ground tunneling Provides nontechnical guidance on selecting the most appropriate tunneling methods for various situations Includes a brief history of tunneling and an introduction to geotechnical considerations Discusses tunnel access shaft construction, mucking methods, tunnel haulage, grout, water handling, and much more Practical Tunnel Construction is an important resource for students, construction managers, tunnel designers, municipal engineers, or engineers who are employed by government agencies or corporations that are exploring the feasibility of planning and designing or building a tunnel.

Download or read book Tribocorrosion of Passive Metals and Coatings written by D Landolt and published by Elsevier. This book was released on 2011-10-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems. - Comprehensively reviews current research on the tribocorrosion of passive metals and coatings, with particular reference to the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems - Chapters discuss tribocorrosion mechanisms under fretting, sliding and erosion conditions before focussing on methods for measuring and preventing tribocorrosion - Includes a comprehensive selection of tribocorrosion problems in engineering and medicine, such as the tribocorrosion of medical implants, and tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits and elevated-temperature metal working

Download or read book Pollutants Human Health and the Environment written by Jane A. Plant and published by John Wiley & Sons. This book was released on 2012-02-08 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollutants, Human Health and the Environment is a comprehensive, up-to-date overview of environmental pollutants that are of current concern to human health. Clearly structured throughout, the main body of the book is divided by pollutant type with a chapter devoted to each group of pollutants. Each chapter follows a similar format to facilitate comparison and discussion. For each pollutant, the authors describe the sources, pathways, environmental fate and sinks as well as known toxicological effects. Importantly, the second chapter on heavy metals and other inorganic substances deals with trace element deficiencies which can have serious problems for human health. Some rocks and soils are naturally low in some trace elements and intensive agriculture over the past half century has effectively mined many trace elements reducing their levels in soils and crops. The final chapter is a discussion about the various risk assessment frameworks and regulations covering the main pollutants. Comprehensive, up-to-date coverage of environmental pollutants of concern to human health Clearly divided into pollutant type with each chapter devoted to a different pollutant group Clearly structured throughout with the same format for each chapter to help facilitate comparison and discussion and enable readers to prioritise chemicals of concern Description of the sources, pathways, environmental fate and known toxicological effect Includes contributions from leading researchers and edited by a team of experts in the field

Download or read book Solid Waste Management written by Elizabeth M. Thomas-Hope and published by Canoe Press. This book was released on 1998 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste has become a major consequence of development and modernization, yet some of the greatest challenges to its management are felt most keenly in the developing countries. This is part of the larger paradox of development; namely, that factors that create the most intransigent problems currently facing the developing countries are invariably those which derive from development itself. Introduction This volume presents a collection of papers which, with perspectives from Africa and the Caribbean, raise critical issues in the management of solid waste. It is intended to offer a basis for discussion among the wide range of disciplines and sectors involved in solid waste management and suggest directions for future work both in the theoretical and practical dimensions of the challenge with which developing countries are confronted.

Download or read book Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams written by Xiaoshan Lin and published by Woodhead Publishing. This book was released on 2019-10-18 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams presents advanced methods and techniques for the analysis of composite and FRP reinforced concrete beams. The title introduces detailed numerical modeling methods and the modeling of the structural behavior of composite beams, including critical interfacial bond-slip behavior. It covers a new family of composite beam elements developed by the authors. Other sections cover nonlinear finite element analysis procedures and the numerical modeling techniques used in commercial finite element software that will be of particular interest to engineers and researchers executing numerical simulations. - Gives advanced methods and techniques for the analysis of composite and fiber Reinforced Plastic (FRP) and reinforced concrete beams - Presents new composite beam elements developed by the authors - Introduces numerical techniques for the development of effective finite element models using commercial software - Discusses the critical issues encountered in structural analysis - Maintains a clear focus on advanced numerical modeling

Download or read book Restoring Community Connections to the Land written by María E. Fernández-Giménez and published by CABI. This book was released on 2012 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rangelands of China and Mongolia encompass diverse landscapes of global environmental and cultural significance. Pastoralists in these two nations share much common history and tradition, including their nomadic heritage and twin eras of collectivized production under different centrally planned socialist regimes. This unique collection of case studies describes the change, loss, re-emergence and resilience of seven herder communities located in distinct socio-ecological settings ranging from the Gobi desert of Mongolia to the Tibetan Plateau regions of China's Sichuan and Gansu Provinces. Useful for policy makers within international development and conservation policy, this book is also of interest for researchers and students of rural economics and agriculture.

Download or read book Paediatric Rehabilitation Engineering written by Tom Chau and published by CRC Press. This book was released on 2016-04-19 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in paediatric rehabilitation engineering can serve as a springboard to education, psychosocial, social, physical and cognitive development for children and youth with disabilities. Instead of providing an overview of rehabilitation engineering, Paediatric Rehabilitation Engineering focuses on the uniqueness of the paediatric subspecialt