Download or read book Geotechnical Engineering Handbook Elements and Structures written by Ulrich Smoltczyk and published by John Wiley & Sons. This book was released on 2003-05-06 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 3 of this Handbook deals with foundations. It presents spread foundations starting with basic designs right up the necessary proofs. The section on pile foundations covers possible types of piles and their design, together with their load-bearing capacity, suitability, sample loads and testing. A further chapter explains the use, manufacture and calculation of caissons, illustrated by real-life examples. There is comprehensive coverage of the possibilities for stabilising excavations, together with the relevant area of application, while another section is devoted to the useful application of trench walls. Shore protection is treated in a special contribution covering sheet pile walls, while all types of slope protection and retainments are described in detail with excellent illustrations. Two further contributions are devoted to the special topics of machine foundations and foundations in subsidence regions. The entire book is an indispensable aid in the planning and execution of all types of foundations found in practice, whether for academics or practitioners.

Download or read book Geotechnical Engineering Handbook written by Braja M. Das and published by J. Ross Publishing. This book was released on 2011 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Geotechnical Engineering Handbook brings together essential information related to the evaluation of engineering properties of soils, design of foundations such as spread footings, mat foundations, piles, and drilled shafts, and fundamental principles of analyzing the stability of slopes and embankments, retaining walls, and other earth-retaining structures. The Handbook also covers soil dynamics and foundation vibration to analyze the behavior of foundations subjected to cyclic vertical, sliding and rocking excitations and topics addressed in some detail include: environmental geotechnology and foundations for railroad beds.

Download or read book The Foundation Engineering Handbook written by Manjriker Gunaratne and published by CRC Press. This book was released on 2006-01-13 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Great strides have been made in the art of foundation design during the last two decades. In situ testing, site improvement techniques, the use of geogrids in the design of retaining walls, modified ACI codes, and ground deformation modeling using finite elements are but a few of the developments that have significantly advanced foundation engineering in recent years. What has been lacking, however, is a comprehensive reference for foundation engineers that incorporates these state-of-the-art concepts and techniques. The Foundation Engineering Handbook fills that void. It presents both classical and state-of-the-art design and analysis techniques for earthen structures, and covers basic soil mechanics and soil and groundwater modeling concepts along with the latest research results. It addresses isolated and shallow footings, retaining structures, and modern methods of pile construction monitoring, as well as stability analysis and ground improvement methods. The handbook also covers reliability-based design and LRFD (Load Resistance Factor Design)-concepts not addressed in most foundation engineering texts. Easy-to-follow numerical design examples illustrate each technique. Along with its unique, comprehensive coverage, the clear, concise discussions and logical organization of The Foundation Engineering Handbook make it the one quick reference every practitioner and student in the field needs.

Download or read book Advanced Geotechnical Engineering written by Chandrakant S. Desai and published by CRC Press. This book was released on 2013-11-27 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil-structure interaction is an area of major importance in geotechnical engineering and geomechanics Advanced Geotechnical Engineering: Soil-Structure Interaction using Computer and Material Models covers computer and analytical methods for a number of geotechnical problems. It introduces the main factors important to the application of computer

Download or read book Geotechnical and Geoenvironmental Engineering Handbook written by R. Kerry Rowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface. Dedication. List of Figures. List of Tables. List of Contributors. Basic Behavior and Site Characterization. 1. Introduction; R.K. Rowe. 2. Basic Soil Mechanics; P.V. Lade. 3. Engineering Properties of Soils and Typical Correlations; P.V. Lade. 4. Site Characterization; D.E. Becker. 5. Unsaturated Soil Mechanics and Property Assessment; D.G. Fredlund, et al. 6. Basic Rocks Mechanics and Testing; K.Y. Lo, A.M. Hefny. 7. Geosynthetics: Characteristics and Testing; R.M. Koerner, Y.G. Hsuan. 8. Seepage, Drainage and Dewatering; R.W. Loughney. Foundations and Pavements. 9. Shallo.

Download or read book Geotechnical Engineering Handbook written by Michael Carter and published by . This book was released on 1983 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Engineering Handbook Procedures written by Ulrich Smoltczyk and published by John Wiley & Sons. This book was released on 2003-03-14 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the Handbook covers the geotechnical procedures used in manufacturing anchors and piles as well as for improving or underpinning foundations, securing existing constructions, controlling ground water, excavating rocks and earth works. It also treats such specialist areas as the use of geotextiles and seeding.

Download or read book Geotechnical Engineer s Portable Handbook written by Robert Day and published by McGraw Hill Professional. This book was released on 1999-12-02 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-volume library of instant geotechnical and foundation data Now for the first time ever, geotechnical, foundation, and civil engineers...geologists...architects, planners, and construction managers can quickly find information they must refer to every working day, in one compact source. Edited by Robert W. Day, the time -and effort-saving Geotechnical Engineer's Portable Handbook gives you field exploration guidelines and lab procedures. You'll find soil and rock classification, basic phase relationships, and all the tables and charts you need for stress distribution, pavement, and pipeline design. You also get abundant information on all types of geotechnical analyses, including settlement, bearing capacity, expansive soil, slope stability - plus coverage of retaining walls and building foundations. Other construction-related topics covered include grading, instrumentation, excavation, underpinning, groundwater control and more.

Download or read book Advanced Geotechnical Engineering written by Chandrakant S. Desai and published by CRC Press. This book was released on 2013-11-27 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil-structure interaction is an area of major importance in geotechnical engineering and geomechanics Advanced Geotechnical Engineering: Soil-Structure Interaction using Computer and Material Models covers computer and analytical methods for a number of geotechnical problems. It introduces the main factors important to the application of computer methods and constitutive models with emphasis on the behavior of soils, rocks, interfaces, and joints, vital for reliable and accurate solutions. This book presents finite element (FE), finite difference (FD), and analytical methods and their applications by using computers, in conjunction with the use of appropriate constitutive models; they can provide realistic solutions for soil–structure problems. A part of this book is devoted to solving practical problems using hand calculations in addition to the use of computer methods. The book also introduces commercial computer codes as well as computer codes developed by the authors. Uses simplified constitutive models such as linear and nonlinear elastic for resistance-displacement response in 1-D problems Uses advanced constitutive models such as elasticplastic, continued yield plasticity and DSC for microstructural changes leading to microcracking, failure and liquefaction Delves into the FE and FD methods for problems that are idealized as two-dimensional (2-D) and three-dimensional (3-D) Covers the application for 3-D FE methods and an approximate procedure called multicomponent methods Includes the application to a number of problems such as dams , slopes, piles, retaining (reinforced earth) structures, tunnels, pavements, seepage, consolidation, involving field measurements, shake table, and centrifuge tests Discusses the effect of interface response on the behavior of geotechnical systems and liquefaction (considered as a microstructural instability) This text is useful to practitioners, students, teachers, and researchers who have backgrounds in geotechnical, structural engineering, and basic mechanics courses.

Download or read book Geotechnical Engineering Handbook Fundamentals written by and published by . This book was released on 2002 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis Design and Construction of Foundations written by Yung Ming Cheng and published by CRC Press. This book was released on 2021-02-21 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Design and Construction of Foundations outlines methods for analysis and design of the construction of shallow and deep foundations with particular reference to case studies in Hong Kong and China, as well as a discussion of the methods used in other countries. It introduces the main approaches used by geotechnical and structural engineers, and the precautions required for planning, design and construction of foundation structures. Some computational methods and computer programmes are reviewed to provide tools for performing a more realistic analysis of foundation systems. The authors examine in depth the methods used for constructing shallow foundations, deep foundations, excavation and lateral support systems, slope stability analysis and construction, and ground monitoring for proper site management. Some new and innovative foundation construction methods are also introduced. It is illustrated with case studies of failures and defects from actual construction projects. Some advanced and modern theories are also covered in this book. This book is more targeted towards the understanding of the basic behavior and the actual construction of many geotechnical works, and this book is not dedicated to any design code or specification, though Euro codes and Hong Kong code are also used in this book for illustration. It is ideal for consulting geotechnical engineers, undergraduate and postgraduate students.

Download or read book Geotechnical Engineering Investigation Handbook written by Roy E. Hunt and published by CRC Press. This book was released on 2005-04-12 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Geotechnical Engineering Investigation Handbook provides the tools necessary for fusing geological characterization and investigation with critical analysis for obtaining engineering design criteria. The second edition updates this pioneering reference for the 21st century, including developments that have occurred in the twen

Download or read book Underground Structures written by R.S. Sinha and published by Elsevier. This book was released on 2012-12-02 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most up to date information relevant to the design and instrumentation of underground structures. The structure might be a tunnel, shaft, cavern, or pressure unit, or a combination thereof. Empirical, rational, numerical, convergence and confinement, and discontinuity analysis methods are treated comprehensively. Special chapters are devoted to underground structures in rock burst, swelling, squeezing, and seismic zones. Water control, instrumentation, and tunneling through soft ground are also treated extensively. Sections on the design of pressure tunnels, shafts, caverns, shotcreting, water control, and soft ground tunnels are informative and authoritative. Worked examples are included on the design of rock tunnels, soft ground tunnels, and the treatment of underground structures through difficult ground. Extensive references are provided, and figures, sketches and photographs aid presentation. Important tables on planning, and case histories, allow the reader to build confidence in his design of underground structures. The book will be beneficial to civil, structural, geotechnical and mining engineers, geologists, and planners and managers associated with the design and construction of underground structures.

Download or read book Finite Element Analysis in Geotechnical Engineering written by David M Potts and published by Thomas Telford. This book was released on 2001 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: An insight into the use of the finite method in geotechnical engineering. The first volume covers the theory and the second volume covers the applications of the subject. The work examines popular constitutive models, numerical techniques and case studies.

Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2013-10-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.

Download or read book Modern Applications of Geotechnical Engineering and Construction written by Mahdi O. Karkush and published by Springer Nature. This book was released on 2020-12-21 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: p="" This book contains select papers from the International Conference on Geotechnical Engineering Iraq discussing the challenges, opportunities, and problems of application of geotechnical engineering in projects. The contents cover a wide spectrum of themes in geotechnical engineering, including but not limited to sustainability & geotechnical engineering, modeling of foundations & slope stability, seismic analysis & soil mechanics, construction materials, and construction & management of projects. This volume will prove a valuable resource for practicing engineers and researchers in the field of geotechnical engineering, structural engineering, and construction and management of projects. ^

Download or read book Installation Effects in Geotechnical Engineering written by Michael A. Hicks and published by CRC Press. This book was released on 2013-03-05 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Installation effects in geotechnical engineering contains the proceedings of the International Conference on Installation Effects in Geotechnical Engineering (Rotterdam, The Netherlands, 24-27 March 2013), the closing conference of GEO-INSTALL (FP7/2007-2013, PIAG-GA-2009-230638), an Industry-Academia Pathways and Partnerships project funded by the