Download or read book GB T 24338 4 2018 Translated English of Chinese Standard GBT 24338 4 2018 GB T24338 4 2018 GBT24338 4 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-19 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of GB/T 24338 specifies the emission and immunity requirements for electromagnetic compatibility of electrical and electronic apparatus for railway rolling stock. This part applies to integration of apparatus on rolling stock. The frequency range considered in this part is from 0 GHz ~ 400 GHz. No measurements need to be performed at frequency band where no requirement is specified.

Download or read book GB T 24338 5 2018 Translated English of Chinese Standard GBT 24338 5 2018 GB T24338 5 2018 GBT24338 5 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-08-17 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 24338 specifies the emission and immunity requirements and performance criteria of signalling and telecommunications apparatus in the railway environment. This Part applies to the apparatus included in GB/T 24338.4 being installed in the railway environment and working normally, and the telecommunications signalling data line and power line connected to the apparatus under test.

Download or read book GB T 24338 6 2018 Translated English of Chinese Standard GBT 24338 6 2018 GB T24338 6 2018 GBT24338 6 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-08-17 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 24338 specifies the electromagnetic emission and immunity requirements for fixed power supply electronic and electrical apparatus and systems in the railway system, including the apparatus power supply, the apparatus own protection control circuits, as well as substations, autotransformers, booster transformers, substation switch cabinets, local electrical switches, and other trackside apparatus. This Part does not apply to filters of which the operating voltage is the traction power supply voltage (e.g., filters for harmonic suppression or power factor compensation). Usually the filter requires a separate enclosure and access regulations. If there is electromagnetic emission limit requirement, it will be specified in the electronic apparatus standard.

Download or read book GB T 24338 1 2018 Translated English of Chinese Standard GBT 24338 1 2018 GB T24338 1 2018 GBT24338 1 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-08-10 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 24338 specifies the structure and content of other parts of GB/T 24338. This Part specifies performance criteria which apply to the whole standard. Chapter 5 gives information on electromagnetic compatibility management. The use of this Part alone is insufficient to judge whether the basic requirements of the electromagnetic compatibility specification are met. It shall be considered in conjunction with other parts of GB/T 24338.

Download or read book GB T 35070 4 2018 Translated English of Chinese Standard GBT 35070 4 2018 GB T35070 4 2018 GBT35070 4 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-04-07 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 35070 specifies the test items and test methods of road-side unit and IC card read-write terminal of parking electronic toll collection system. This Part is applicable to the testing of key equipment, which adopts non-cash payment card or implements automatic payment through dedicated short-range communication protocol in parking electric toll collection system and vehicle access management system.

Download or read book GB T 10088 2018 Translated English of Chinese Standard GBT 10088 2018 GB T10088 2018 GBT10088 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-11-16 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the module and diameter of cylindrical worm. This Standard applies to worms of cylindrical worm gears.

Download or read book GB T 25978 2018 Translated English of Chinese Standard GBT 25978 2018 GB T25978 2018 GBT25978 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-05 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, performance requirements and test method for the plates and labels use don road vehicle to describe the vehicle information. This Standard is applicable to various types of plates and labels used on road vehicles to describe the vehicle manufacturing information, warning information, manipulation and indicative information. This Standard is not applicable to the directly-formed vehicle labels through marking, etching, casting, spraying, printing on the vehicle or vehicle components; or through sewing on the bodies of the components.

Download or read book GB T 35967 2018 Translated English of Chinese Standard GBT 35967 2018 GB T35967 2018 GBT35967 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-01-13 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies personnel requirements, facilities and equipment, testing procedures, testing steps and sample management procedures for label conformance testing. This Standard is applicable to label conformance testing of various products.

Download or read book GB T 36149 2018 Translated English of Chinese Standard GBT 36149 2018 GB T36149 2018 GBT36149 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-01-13 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, classification, requirements, and marking of express delivery vehicles. This Standard applies to express delivery vehicles modified on a finalized automobile chassis or finalized automobile.

Download or read book GB T 18411 2018 Translated English of Chinese Standard GBT 18411 2018 GB T18411 2018 GBT18411 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-07-21 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the type, marking content, marking position and marking requirements of power-driven vehicles manufacturer plate. This standard applies to automobiles and non-complete vehicles, trailers, motorcycles and mopeds, tractors that constitute tractor transport units, wheeltype special machinery vehicles, special-type vehicles, and other vehicles can make reference to it.

Download or read book GB T 36404 2018 Translated English of Chinese Standard GBT 36404 2018 GB T36404 2018 GBT36404 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-07-21 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies terms, definition, detection requirements, on-line detection system composition and detection result output of on-line detection for spot faults of flat glass. This Standard is applicable to on-line and real-time automatic detection for spot faults of flat glass manufactured through float process.

Download or read book GB T 36267 2018 Translated English of Chinese Standard GBT 36267 2018 GB T36267 2018 GBT36267 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-08-10 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the statistical classification, statistical period, statistical preparation, energy consumption and output statistics and energy consumption calculation methods for the energy consumption per unit products of tempered glass. This Standard is applicable to the test of energy consumption in the horizontal tempered glass production line of physical tempering method. This Standard is not applicable to the test of energy consumption in the chemical tempered glass production line.

Download or read book GB T 2423 61 2018 Translated English of Chinese Standard GB T2423 61 2018 GBT 2423 61 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2022-08-21 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 2423 specifies a test method for the overall blowing of sand-dust on large specimens. This Part applies to the sand-dust test of large specimens, which are difficult to be completed by the method in GB/T 2423.37. It includes but not limited to the following products: Wind power generation equipment, solar power generation equipment in desert areas, vehicles and outdoor equipment, etc. This Part does not apply to the non-abrasive fine dust test and free fall test of large specimens. For the non-abrasive fine dust test and free fall test method of large specimens, it shall refer to GB/T 2423.37-2006. This test method is not applicable to testing the air filters.

Download or read book GB T 36708 2018 Translated English of Chinese Standard GBT 36708 2018 GB T36708 2018 GBT36708 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-30 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the hardness, size, shape, technical requirements, test methods, inspection rules, package, marking and quality certificate, etc. of the prehardening high-speed tool steel bars and wires. This Standard is applicable to the pre-hardening high-speed tool steel bars and wires (hereinafter referred to as steel) with a diameter of 1.0mm~15.0mm, and polishing or cold drawing surface.

Download or read book GB T 34710 3 2018 Translated English of Chinese Standard GBT 34710 3 2018 GB T34710 3 2018 GBT34710 3 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-01-01 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 34710 specifies the method for flammable classification of mixture gas. This Part applies to the flammable classification of mixture gas in air. This Part does not apply to mixture gas having oxidizing components and a tendency to oxidize.

Download or read book GB T 4249 2018 Translated English of Chinese Standard GBT 4249 2018 GB T4249 2018 GBT4249 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-06-18 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the fundamental concepts, principles and rules that are valid for the creation, interpretation and application of all relevant standards, technical specifications and technical documents to product dimensions, geometrical product specifications (GPS) and inspections. This Standard is applicable to the interpretation for GPS marks on all types of drawings. Drawing referred in this Standard is a broad concept. It includes all documents that express workpiece specifications.

Download or read book GB T 23456 2018 Translated English of Chinese Standard GB T 23456 2018 GBT23456 2018 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-10-28 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification and labeling, requirements, test methods, inspection rules, as well as packaging, marking, transportation and storage of phosphogypsum. This Standard is applicable to phosphogypsum, which is obtained when phosphoric acid is produced through the wet method, using phosphate ore as the raw material, and with calcium sulfate dihydrate (CaSO4 ? 2H2O) as the main component.