Download or read book GB T 18230 1 2000 Translated English of Chinese Standard GBT 18230 1 2000 GB T18230 1 2000 GBT18230 1 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-07-30 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the hexagon bolts for structural bolting with large width across flats - thread specification is M12-M36, short length of thread, performance grades are 8.8 and 10.9; and the product grade is C. If other technical requirements are required, it shall be selected from current standards (such as GB/T196, GB/T197, and GB /T3098.1). The bolts specified in this Standard shall be matched with appropriate nuts (such as GB/T18230.3 or GB/T18230.4), so as to prevent connections from thread tripping due to over-twisting in high-level. 8.8s U and 10.9s U1 bolts can be used by negotiation of supplier and purchaser. The bolts must be matched with 6H hot dip galvanizing nuts, and the connections may cause thread tripping due to over-twisting.
Download or read book GB T 18230 3 2000 Translated English of Chinese Standard GBT 18230 3 2000 GB T18230 3 2000 GBT18230 3 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-07-25 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the hexagon nuts for structural bolting - thread specification is M12-M36, the performance grades are 8 and 10, the product grade is B, and used with grades 8.8 and 10.9 bolts. Other technical requirements shall be selected from current standards (such as GB/T196, GB/T197 and GB/T3098.2). The nuts specified in this Standard shall be matched with appropriate bolts (such as GB/T18230.1 or GB/T18230.2), so as to effectively prevent the connectors from thread tripping due to over-twisting. Hot-dipped galvanized nuts can provide 6H thread tolerance zone after galvanization according to the agreement by the supplier and purchaser. 6H hot-dipped galvanized nuts must be matched with 8.8s U or 10.9s U hot-dipped galvanized bolts, and thread tripping may occur due to over-twisting.
Download or read book GB T 18230 2 2000 Translated English of Chinese Standard GBT 18230 2 2000 GB T18230 2 2000 GBT18230 2 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-07-30 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the hexagon nuts for structural bolting - thread specification is M12-M36, the performance grades are 8 and 10, the product grade is B, and used with grades 8.8 and 10.9 bolts. Other technical requirements shall be selected from current standards (such as GB/T196, GB/T197 and GB/T3098.2). The nuts specified in this Standard shall be matched with appropriate bolts (such as GB/T18230.1 or GB/T18230.2), so as to effectively prevent the connectors from thread tripping due to over-twisting. Hot-dipped galvanized nuts can provide 6H thread tolerance zone after galvanization according to the agreement by the supplier and purchaser. 6H hot-dipped galvanized nuts must be matched with 8.8s U or 10.9s U hot-dipped galvanized bolts, and thread tripping may occur due to over-twisting.
Download or read book GB T 18230 6 2000 Translated English of Chinese Standard GBT 18230 6 2000 GB T18230 6 2000 GBT18230 6 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-07-30 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the hexagon nuts for structural bolting - thread specification of M10 ~ M36, style 1, hot-dip galvanized according to GB/T 13912 or sherardized according to GB/T 5067, oversize tapped according to 6AX, property classes of 5, 6 and 8, product grade of A used for dM16. If other technical requirements are required, it shall be selected from current standards (such as GB/T 196, GB/T 197, GB/T 3098.2, and GB/T 3103.1).
Download or read book GB T 18230 5 2000 Translated English of Chinese Standard GBT 18230 5 2000 GB T18230 5 2000 GBT18230 5 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-07-30 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the plain washers, nominal specification is 12-36mm, for high strength structural bolting hardened and tempered with hexagon head bolts and matched nuts.
Download or read book GB T 119 1 2000 Translated English of Chinese Standard GBT 119 1 2000 GB T119 1 2000 GBT119 1 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-02-24 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the characteristics of parallel pins of unhardened steel and austenitic stainless steel, with nominal diameters d from 0.6 mm to 50 mm inclusive.
Download or read book GB T 1804 2000 Translated English of Chinese Standard GBT 1804 2000 GB T1804 2000 GBT1804 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-10-01 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions of passenger car tyres, the size designation methods, and the dimensions, inflation pressures and loads corresponding to size designation etc.
Download or read book GB T 19363 1 2008 Translated English of Chinese Standard GBT 19363 1 2008 GB T19363 1 2008 GBT19363 1 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-08-02 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 19363.1 specifies the translation services - translation services specifications. This Part is applicable to translation services.
Download or read book GB T 1237 2000 Translated English of Chinese Standard GBT 1237 2000 GB T1237 2000 GBT1237 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-03-06 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a system for the designation of fasteners in product standards.
Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3870 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
Download or read book GB T 10708 3 2000 Translated English of Chinese Standard GBT 10708 3 2000 GB T10708 3 2000 GBT10708 3 2000 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-11-24 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the type, dimensions and tolerances of the rubber dust seals for reciprocating motion. This standard applies to the rubber dust seals installed on the reciprocating hydraulic cylinder piston rod guide sleeve for the purposes of dust proof and sealing.
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book GB T 97 1 2002 Translated English of Chinese Standard GBT 97 1 2002 GB T97 1 2002 GBT97 1 2002 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-16 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies normal-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1.6 mm to 64 mm inclusive.
Download or read book GB 12476 1 2000 English translated version written by Codeofchina and published by https://www.codeofchina.com. This book was released on 2001-07-01 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: GB 12476.1-2000 Low-voltage switchgear and controlgear assemblies-Part 1:General rules English-translated version
Download or read book GB T 953 1988 Translated English of Chinese Standard GBT 953 1988 GB T953 1988 GBT953 1988 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-16 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies double end studs of product grade C with the thread diameter of M8 ~ M48.
Download or read book GB T 18488 1 2006 Translated English of Chinese Standard GBT 18488 1 2006 GB T18488 1 2006 GBT18488 1 2006 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2014-10-07 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part specifies the requirements such as duty, quota, environmental conditions, technical requirements, inspection test item and type test of the electrical machines and controllers of electric vehicles. This Part applies to the electrical machines and controllers for electric vehicles. All the items relevant to electrical machines which are not specified in this Part shall comply with GB 755-2000. If there are special requirements, the user and manufacturer may specify them in special technical agreement. All the items relevant to driving controllers which are not specified in this Part shall comply with GB/T 3859.1-1993. If there are special requirements, the user and manufacturer may specify them in special technical agreement.
Download or read book GB T 12230 2005 Translated English of Chinese Standard GBT 12230 2005 GB T12230 2005 GBT12230 2005 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-19 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the chemical composition, mechanical properties, technical requirements, test and inspection, etc. of stainless steel castings for general purpose industrial valves. This Standard is applicable to stainless steel castings such as pressure valves, flanges, and pipe fittings used in high temperature and corrosive environments.