Download or read book GB T 17600 2 1998 Translated English of Chinese Standard GBT 17600 2 1998 GB T17600 2 1998 GBT17600 2 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to the test piece of austenitic stainless steels in solution treatment condition within the tensile strength range 450 to 750 MPa, with an original gauge length not exceed 25Sx, and a width to thickness ratio not exceed 20.
Download or read book GB T 17600 1 1998 Translated English of Chinese Standard GBT 17600 1 1998 GB T17600 1 1998 GBT17600 1 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to carbon and low alloy steels within the tensile strength range 300 to 700 MPa and in the hot-rolled, hot-rolled and normalized or annealed conditions, with or without tempering.
Download or read book GB T 9963 1998 Translated English of Chinese Standard GBT 9963 1998 GB T9963 1998 GBT9963 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-11-30 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, technical requirements, inspection methods, and inspection rules of tempered glass. It applies to tempered glass for construction and tempered glass for use other than construction such as industrial equipment.
Download or read book GB T 17301 1998 Translated English of Chinese Standard GB T 17301 1998 GBT17301 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-08-08 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the permissible limits for rounding and chamfering of edges and corners in order to reduce the risk of injury to drivers or maintenance personnel when operating earth-moving machinery and performing maintenance work. This standard applies to the operation and maintenance passages and exit devices specified in GB/T 17299 and GB/T 17300 and the operating space for earth-moving machinery drivers specified in GB 8498. 2 References The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard was published, the versions shown were valid. All standards may be revised, so the parties using this standard shall explore the possibility of using the latest versions of the following standards. GB/T 17299-1998 Earth-moving machinery - Minimum access dimensions GB/T 17300-1998 Earth-moving machinery - Access systems GB 8498-87 Earth-moving machinery - Basic types - Vocabulary 3 Technical requirements If structural edges and corners of metal or non-metal materials (see Figure 1) are hard enough to bruise or pierce human skin, the structures shall comply with the requirements of 3.1~3.3. GB/T 17301-1998 www.ChineseStandard.net Buy True-PDF Auto-delivery Page 6 of 6 Figure 1 -- Edges and corners 3.1 The edges and corners of parts shall be rounded or chamfered, with a minimum size of 0.3 mm, as shown in Figure 2; for edges with a thickness of no more than 1 mm, protective strips shall be installed. 3.2 The external corners of the driver's cab, working doors or other sharp objects shall be rounded with a radius of not less than 4 mm. 3.3 The edges/corners of handles and handgrips shall have a radius of not less than 5 mm. Figure 2 -- Rounding and chamfering of edges/corners __________ END __________ EdgeEdgeCornerRounding Chamfering
Download or read book GB T 9750 1998 Translated English of Chinese Standard GBT 9750 1998 GB T9750 1998 GBT9750 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-04-30 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the main content and basic requirements of marks for package of coating products. Marks for package of coating products, which are used to represent product model, name, net weight, quality grade for package, consist of texts, letters, graphics and Arabic numerals.
Download or read book GB T 17483 1998 Translated English of Chinese Standard GBT 17483 1998 GB T17483 1998 GBT17483 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-09-12 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies, under the steady state conditions, the test code for the determination of airborne noise level of hydraulic pumps. This Standard is applicable to measure pump A-weighted sound power level, pump octave band (center frequency is 125~8000Hz) sound power level.
Download or read book GB T 2 2016 Translated English of Chinese Standard GBT 2 2016 GB T2 2016 GBT2 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-07-09 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the form and dimensions of ends of parts with external metric screw thread (e.g. bolt, screw and stud ends) recommended for use. This Standard applies to standardized or non-standardized threaded parts.
Download or read book GB T 17505 1998 Translated English of Chinese Standard GBT 17505 1998 GB T17505 1998 GBT17505 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-12-04 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the general technical delivery requirements of all steel and steel products included in GB/T 15574, except cast steel and sintered metal products.
Download or read book GB T 901 1988 Translated English of Chinese Standard GBT 901 1988 GB T901 1988 GBT901 1988 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-16 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies double end studs of product grade B with the thread diameter of M2 ~ M56.
Download or read book GB T 6172 2 2016 Translated English of Chinese Standard GBT 6172 2 2016 GB T6172 2 2016 GBT6172 2 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-03-18 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 6172 specifies the type and dimension, technical conditions and markings of prevailing torque type hexagon thin nuts (with non-metallic insert).
Download or read book GB GB T GBT Chinese Standard English translated version Catalog002 written by CODEOFCHINA - Dr. Meng Yongye and published by Codeofchina Inc.. This book was released on 2018-05-04 with total page 3870 pages. Available in PDF, EPUB and Kindle. Book excerpt: All English-translated Chinese codes are available at: www.codeofchina.com
Download or read book GB T 451 2 2002 Translated English of Chinese Standard GBT 451 2 2002 GB T451 2 2002 GBT451 2 2002 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-09-24 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies a method of determining the grammage of paper and board. This Standard applies to various papers and boards.
Download or read book GB T 2521 2 2016 Translated English of Chinese Standard GBT 2521 2 2016 GB T2521 2 2016 GBT2521 2 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-10-26 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of GB/T 2521 specifies the terms, definitions, classification, symbols and nameplates, general requirements, technical requirements, test and inspection, determination and re-inspection rules, packaging, mark, quality certificate and content of order of grain-oriented electrical steel strip (sheet) with the nominal thickness of 0.23 mm, 0.27 mm, 0.30 mm and 0.35 mm. This Standard is applicable to grain-oriented electrical steel strip (sheet) that is applied to magnetic circuit structure under fully-processed cold-rolled delivered state.
Download or read book GB T 6175 2016 Translated English of Chinese Standard GBT 6175 2016 GB T6175 2016 GBT6175 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-01-08 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies type sizes, technical conditions and marks of hexagon nuts, style 2.
Download or read book GB T 2975 1998 Translated English of Chinese Standard GBT 2975 1998 GB T2975 1998 GBT2975 1998 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-11-17 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements of the mechanical testing, sampling location and sample preparation of the section steel, steel bar, steel plate and steel tube defined in GB/T 15574. Through negotiation on both sides, this Standard may also adopt other metal products for sampling.
Download or read book GB T 19976 2005 Translated English of Chinese Standard GBT 19976 2005 GB T19976 2005 GBT19976 2005 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-04-18 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the methods for the determination of the bursting strength of textile by polished steel balls, including the test piece bursting strength tests in two states of conditioning in standard atmosphere for test and soaked in the water.
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2794 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.